• Journal of Acupuncture Research
• /
• 제28권1호
• /
• pp.65-75
• /
• 2011

Objectives : The purpose of this study was to evaluate the clinical effect of indirect moxibustion treatment for HIVD patients. Methods : From March 2010 to December 2010, 32 HIVD patients who admitted to Semyung oriental medical hospital were divided into two groups. Group I was treated by indirect moxibustion and general acupuncture, group II by general acupuncture. We evaluated the treatment effect of each group with the visual analog scale(VAS) and Oswestry disability index(ODI) by dividing three period(from admission day to third day after admission, from third day to sixth day after admission and from sixth day to ninth day after admission). Results : 1. Group I was more effective than group II in VAS score reducing rate at sixth day after admission and ninth day after admission but there was no statistical significance between two groups at third day after admission 2. Group I was more effective than group II in VAS improvement rate from third day to sixth day after admission but there was no statistical significance between two groups from admission day to third day after admission and sixth day to ninth day after admission. 3. Group I was more effective than group II in ODI score reducing rate at sixth day after admission and ninth day after admission but there was no statistical significance between two groups at third day after admission. 4. In ODI improvement rate group I was higher than group II, but there was no statistical significance. Conclusions : Through this research, Indirect moxibustion treatment is considered to be effective reducing pain for HIVD(Herniated intervertebral disc) patients.

• 한국의학물리학회지:의학물리
• /
• 제21권3호
• /
• pp.239-245
• /
• 2010

본 연구의 목적은 직 간접 변환방식 검출기를 사용한 디지털 유방 X선 촬영시스템의 영상 화질을 비교하고 평가함에 있다. 영상의 정량적인 분해능을 나타내는 변조전달함수(MTF), 노이즈 특성을 나타내는 정규화된 잡음력 스펙트럼(NNPS), 그리고 신호 대 잡음비 성능을 나타내는 양자검출효율(DQE)인자를 이용하여 영상 화질평가를 하였다. DQE는 IEC 62220-1-2 규약에 따라 edge 팬텀을 사용한 MTF 도출을 이용하여 계산되었다. 대조도 대 노이즈비(CNR) 측정은 한국의료영상품질관리원에서 제시한 가이드라인에 따라 측정되었다. 직접 변환방식 검출기가 간접 변환방식 검출기에 비해 공간주파수별로 MTF와 DQE 값이 높은 것으로 측정되었다. 동일한 평균유선선량(AGD)일 때 직접 변환방식의 검출기는 더 높은 CNR값을 보였다. 공간주파수별로 높은 DQE 값을 갖는 직접 변환방식 검출기는 디지털 유방 X선 촬영시스템에 있어서 향상된 영상 화질과 적은 환자선량을 제공할 것이다.

• 한국환경생태학회지
• /
• 제31권4호
• /
• pp.420-427
• /
• 2017

본 연구에서는 산림치유인자인 경관과 청각요소를 활용한 산림의 간접적 영향이 기분개선에 미치는 영향을 알아보고자 하였다. 실험은 신체건강한 대학생 30명($23.6{\pm}1.7$세)을 대상으로, 2016년 10월 5일부터 11월 30일 까지 약 2달간 실시되었다. 산림과 도시공간의 경관과 소리를 이용하여 3가지 요소(이미지 요소, 소리 요소 그리고 이미지+소리 요소)를 만들었으며, 대상자들이 실내에서 이 3가지 요소들을 감상하였다. 그리고 3가지 요소들이 기분개선에 미치는 영향들을 SPSS 18.0프로그램을 이용하여 비교분석하였다. 기분개선을 측정하기 위한 심리검사로써 기분상태검사(POMS)와 의미분별법(SD)이 사용되었다. 그 결과 간접적인 산림의 자극은 긴장, 피로, 분노, 혼란, 우울감을 억제하고 활력감을 증진시키는 효과를 나타내었고 산림의 자극 간 비교에서는 차이를 보지 않았으나 도시의 자극에 비해 산림의 자극이 쾌적감과 자연감 그리고 진정감을 높이는 효과를 가지는 것으로 나타났다.

• Wind and Structures
• /
• 제20권3호
• /
• pp.449-468
• /
• 2015

Current wind-resistance designs of large-scale indirect dry cooling towers (IDCTs) exclude an important factor: the influence of the ventilation rate for radiator shutter on wind loads on the outer surfaces of the tower shell. More seemingly overlooked aspects are the effects of various ventilation rates on the wind pressure distribution on the tower surfaces of two IDCTs, and the feature of the flow field around them. In order to investigate the effects of the radiator shutter ventilation rates on the aerodynamic interference between IDCTs, this paper established the numerical wind tunnel model based on the Computational Fluid Dynamic (CFD) technology, and analyzed the influences of various radiator shutter ventilation rates on the aerodynamic loads acting upon a single and two extra-large IDCTs during building, installation, and operation stages. Through the comparison with the results of physical wind tunnel test and different design codes, the results indicated that: the influence of the ventilation rate on the flow field and shape coefficients on the outer surface of a single IDCT is weak, and the curve of mean shape coefficients is close to the reference curve provided by the current design code. In a two-tower combination, the ventilation rate significantly affects the downwind surface of the front tower and the upwind surface of the back tower, and the larger positive pressure shifts down along the upwind surface of the back tower as the ventilation rate increases. The ventilation rate significantly influences the drag force coefficient of the back tower in a two-tower combination, the drag force coefficient increases with the ventilation rate and reaches the maximum in a building status of full ventilation, and the maximum drag coefficient is 11% greater than that with complete closure.

• 한국대기환경학회지
• /
• 제33권4호
• /
• pp.393-402
• /
• 2017

In this study, greenhouse gas (GHG) reductions from bioenergy (biogas, biomass) have been estimated in Korea, 2015. This study for construction of reduction inventories as direct and indirect reduction sources was derived from IPCC 2006 guidelines for national greenhouse gas inventories, guidelines for local government greenhouse inventories published in 2016, also purchased electricity and steam indirect emission factors obtained from KPX, GIR respectively. As a result, the annual GHG reductions were estimated as $1,860,000tonCO_{2eq}$ accounting for 76.8% of direct reduction (scope 1) and 23.2% of indirect reduction (scope 2). Estimation of individual greenhouse gases (GHGs) from biogas appeared that $CO_2$, $CH_4$, $N_2O$ were $90,000tonCO_2$ (5.5%), $55,000tonCH_4$ (94.5%), $0.3tonN_2O$ (0.004%), respectively. In addition, biomass was $250,000tonCO_2$ (107%), $-300tonCH_4$ (-3.2%), $-33tonN_2O$ (-3.9%). For understanding the values of estimation method levels, field data (this study) appeared to be approximately 85.47% compared to installed capacity. In details, biogas and biomass resulting from field data showed to be 76%, 74% compared to installed capacity, respectively. In the comparison of this study and CDM project with GHG reduction unit per year installed capacity, this study showed as 42% level versus CDM project. Scenario analysis of GHG reductions potential from bioenergy was analyzed that generation efficiency, availability and cumulative distribution were significantly effective on reducing GHG.

• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.637-648
• /
• 2007

This paper presents a sensor fusion method based on indirect Kalman filter(IKF) for error compensation of low-cost inertial sensors and its application to the determination of attitude and position of small flying robots. First, the analysis of the measurement error characteristics to zero input is performed, focusing on the bias due to the temperature variation, to derive a simple nonlinear bias model of low-cost inertial sensors. Moreover, from the experimental results that the coefficients of this bias model possess non-deterministic (stochastic) uncertainties, the bias of low-cost inertial sensors is characterized as consisting of both deterministic and stochastic bias terms. Then, IKF is derived to improve long term stability dominated by the stochastic bias error, fusing low-cost inertial sensor measurements compensated by the deterministic bias model with non-inertial sensor measurement. In addition, in case of using intermittent non-inertial sensor measurements due to the unreliable data link, the upper and lower bounds of the state estimation error covariance matrix of discrete-time IKF are analyzed by solving stochastic algebraic Riccati equation and it is shown that they are dependant on the throughput of the data link and sampling period. To evaluate the performance of proposed method, experimental results of IKF for the attitude determination of a small flying robot are presented in comparison with that of extended Kaman filter which compensates only deterministic bias error model.

• 한국콘텐츠학회논문지
• /
• 제11권3호
• /
• pp.211-219
• /
• 2011

조명은 인공광원의 개발에 따라 단순히 어둠을 밝히는 의미에서 그 범위를 확대하여 인테리어 디자인(interior design)분야에서 공간의 미적효과를 새롭게 창출하는데 중요한 요소 중 하나로 꼽히고 있다. 그러나 조명의 커버재료의 다양성이나 커버 디자인에 있어서는 선진국에 비해 미흡한 실정이다. 이에 따라 조명기구 중 디자인 요소가 가장 많이 들어 있는 스탠드(stand) 형 간접조명등 디자인에 대한 새로운 모색과 전열 기구를 감싸고 있는 획일화 된 커버(cover) 부분을 친환경적 재료인 도자로 새롭게 디자인하여 제시하는데 있다. 또한 도자제의 커버부분에 있어서 자연미를 강조하고 한국적인 이미지를 응용하여 디자인하는데 중점을 두었으며 연결되는 조명장치의 구조 부분을 새롭게 제시하는데 있다. 그리하여 커버 디자인을 고급화시키므로 서 소비자의 욕구를 보다 적극적으로 수용하는데 기여 할 것이며 도자산업에 고부가가치를 창출할 수 있는 새로운 방향모색과 가능성을 제시할 것으로 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권4호
• /
• pp.486-493
• /
• 2015

설치된 데크재에 대한 성능을 평가하기 위하여 초음파 비파괴시험법을 사용하였다. 먼저 3종류의 데크재에 대해 트랜스듀서의 배치에 따른 직접법과 간접법간의 측정방법간의 차이를 검증하였으며 두 번째로 설치된 데크재의 사용시간의 경과에 따른 초음파속도를 측정 비교하였다. 마지막으로 데크재의 사용수명을 파악하기 위하여 사용시간의 경과에 따른 초음파속도의 변화를 조사하였다. 시험결과 직접법과 간접법간의 측정방법간의 차이는 없는 것으로 나타났으며 직접법에 대한 간접법의 비율은 1.02와 1.05로 각각 나타났다. 설치된 데크재에서 시간의 경과에 따라 초음파 속도는 감소하였으며 이들 간의 관계는 선형으로 나타났다. 시험결과로부터 초음파 비파괴시험법은 설치된 데크재의 유지보수에 관한 효율적인 수단이 될 수 있을 것으로 생각된다.

• 대한지역사회영양학회지
• /
• 제8권6호
• /
• pp.993-1000
• /
• 2003

The purpose of this study was to provide baseline data for revising the recommended energy intake for Korean adults. We recruited 290 adults so as to determine their resting energy expenditure (REE) and energy intake. The REE was measured by indirect calorimetry. We also calculated the REE from prediction equations formulated by World Health Organization (WHO), The energy intake for two consecutive days was assessed using the 24 hour recall method. The body weight, lean body mass (LBM) and percentage body fat were measured using the INBODY 3.0 system. We compared the results of three age groups ; 20 to 29 years,30 to 49 years and 50 years or more. The average energy intake of each age group was below the 7th Korean Recommended Dietary Allowances (RDA). The average energy intake was lower in the older age groups. However, no difference was observed among the age groups when the energy intake as a percentage of the Korean RDA was compared. Our measurement of the REE was higher than the REE calculated by the WHO's method. Correlation coefficients between the measured and the calculated values of REE for all age groups showed significant correlations (r=0.475-0.672). As the ages of all the subjects increased, the REE/kg of body weight decreased. There were no significant differences in the REE / kg of the LBM between the different age groups; however, the REE/kg of the LBM was higher in the female group than in the male group. Negative correlations of the REE with the age (r=-0.242) and body fat ratio (r=-0.313) were observed; positive correlations of the REE with the BMI (r=0.265), height (r=0.570), weight (r=0.562) and LBM (r=0.586) were also found (p<0.01).

• Geomechanics and Engineering
• /
• 제10권6호
• /
• pp.775-791
• /
• 2016

The indirect tensile strengths (ITSs) of different cemented paste backfill mixes with different curing times were determined by considering crack initiation and fracture toughness concepts under different loading conditions of steel loading arcs with various contact angles, flat platens and the standard Brazilian test jaw. Because contact area of the ITS test discs developes rapidly and varies in accordance with the deformability, ITSs of curing materials were not found convenient to determine under the loading apparatus with indefinite contact angle. ITS values increasing with an increase in contact angle can be measured to be excessively high because of the high contact angles resulted from the deformable characteristics of the soft paste backfill materials. As a result of the change of deformation characteristics with the change of curing time, discs have different contact conditions causing an important disadvantage to reflect the strength change due to the curing reactions. In addition to the experimental study, finite element analyses were performed on several types of disc models under various loading conditions. As a result, a comparison between all loading conditions was made to determine the best ITSs of the cemented paste backfill materials. Both experimental and numerical analyses concluded that loading arcs with definite contact angles gives better results than those obtained with the other loading apparatus without a definite contact angle. Loading arcs with the contact angle of $15^{\circ}$ was found the most convenient loading apparatus for the typical cemented paste backfill materials, although it should be used carefully considering the failure cracks for a valid test.