• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.199-202
• /
• 2004

Membrane technology is widely employed as a means of producing various qualities of water from surface water, well water, brackish water and seawater. This is also used in industrial wastewater treatment and its recycling process. A large volume of wastewater is generated by the steel industry. Presently, the treated wastewater from the steel industry cannot be recycled, because some of its components cause either direct or indirect problems.(omitted)

• 산업경영시스템학회지
• /
• 제18권35호
• /
• pp.131-138
• /
• 1995

For the purpose of the reduction of tile cost, a production/inventory model including the interference phenomenon was developed. By investigating the cause and the characteristics of the direct/indirect cost due to the interference phenomenon, a strategy for suitable production was developed. The developed model was quantitatively validated using an existing-EPQ model and the SIMAN package was used to simulate and animate the model. Consequently, it was presented that the total operating cost of the system could be decreased with tile proposed model.

• 대한가정학회지
• /
• 제39권9호
• /
• pp.137-152
• /
• 2001

On the basis of the equity theory, as the couple perceives their relationship is equitable, they tend to make decisions jointly and are satisfied with their family lives. Therefore this study is aimed to identify the relationship among perception of equity, decision-making styles and family life satisfaction in dual-career couples. As a result of analyzing the cause-effect relationship, it shows that many socioeconomic$.$psychological variables have direct indirect impact on family life satisfaction through medium factor, so this study proves the application of the cause-effect modes. However the influence of the perception of equity of wives were higher than husbands.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.223-227
• /
• 2004

False-tripping of MCCB(Molded Case Circuit Breaker) and ELB(Earth Leakage Circuit Breaker), using to protect overload and ground-fault accidents in power system raise direct and indirect losses like as information loss, facilities damage, slipup of goods production in industry place. Cause of false-tipping of MCCB and ELB is various and cause analysis of false-tripping is mostly made up by inference because trip is not reappeared. This paper investigated and analyzed causes and influences of false-tripping of MCCB and ELB by making up a question to safety managers of two hundred and eighteen electrical facilities for private use. Also, the necessity of experimental study on the effect of harmonics on false-tipping of MCCB and ELB was presented.

• KIEAE Journal
• /
• 제12권2호
• /
• pp.77-82
• /
• 2012

Data mining is to discover problems in the large amounts of data. Also, data mining trying to find the cause of the problem and the structure. Building energy consumption patterns, the amount of data is infinite. Also, the patterns have a lot of direct and indirect effects. Discussion is needed about the correlation. This work looking for the cause of energy consumption. As a result, energy management can find out the issue. Building energy analysis utilizing data mining techniques to predict energy consumption. And the results are as follows: 1) Using data mining technique, We classified complicated data to several patterns and gained meaningful informations from them. 2) Using cluster analysis, We classified building energy consumption data of residents and analyzed characters of patterns.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.148-155
• /
• 2014

Most truck fires breaking out on the expressway are directly damaged by fire destruction of truck and freight and many of them cause indirect damage such as serious traffic holdups. This study analyzed the fire causes and their liability of the 25-ton truck fire breaking out during expressway driving. This truck fire was caused by manufacturing defect of return spring of a braking system. The fire liability rested with a maker(manufacturer) rather than a truck owner or a driver and the maker also bore fire liability based on the Product Liability Law.

• Journal of Acupuncture Research
• /
• 제23권4호
• /
• pp.1-14
• /
• 2006

Objectives : We implemented the Moxa-Extract Moxibustion Method in order to improve the conventional moxibustion therapy. This method is aimed to eliminate burning wounds and smoke, which are the defects of conventional moxibustion therapy. And we performed to verify the efficiency by comparing the Moxa-Extract Moxibustion Method with the conventional Indirect Moxibustion Method. We measured the body heat and the lasting time of blood circulation improveent using thermography. We implemented the Moxa-Extract Moxibustion Method in order to improve the conventional moxibustion therapy. This method is aimed to eliminate burning wounds and smoke, which are the defects of conventional moxibustion therapy. And we performed to verify the efficiency by comparing the Moxa-Extract Moxibustion Method with the conventional Indirect Moxibustion Method. We measured the body heat and the lasting time of blood circulation improvement using thermography. Methods : The moxibustion therapy has two kinds of effects: The formers are pharmacological effects of the Moxa's vasodilators and antioxidants. The latters are thermal effects which cause improvement of the blood circulation. To remove the demerits without omission of above therapeutic effects, we extracted the vasodilators and antioxidant compounds from the Moxa-CH2Cl2 fraction Moxa-EtOA and composed the moxibustion kit with (Ba0.8 Sr0.2)0.996 Y0.004 TiO2 + 0.5WT SiO2% positive Temperature Coefficients Thermistor. The experimental demonstrations have been made by the stimulating the spot which is CV4(Kwan-Won), CV8(Shin-Guel), CV12(Jung-Wan) acupuncture points of the conception vessel meridian(CV). And stimulating time was one hour. We divided the subjects into 5 groups such as no stimulation group, conventional Indirect Moxibustion group, only Moxa-Extract stimulation group, only heat stimulation group, and Moxa-Extract Moxibustion group. In the different cases, we have measured the body heat in pre-stimulation, just after stimulation, 2 hours after, and 4 hours after. Results : he body heats of the group who were stimulated by the Moxa-Extract Moxibustion method were increased by over the $2^{\circ}C$. And the body heats of the group who were stimulated by the Indirect Moxibustion Method were increased by average the $1^{\circ}C$. We have evaluated that the Moxa-Extract Moxibustion Method is improvement on the Indirect Moxibustion Method by the increasing rate is 200% and increasing time is 150% with the body heat of the abdominal region. Conclusion : We have implemented the Moxa-Extract Moxibustion Method and evaluated the efficiency of the Moxa-Extract Moxibustion Method comparing with the Indirect Moxibustion Method.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제6권9호
• /
• pp.419-428
• /
• 2017

임베디드 시스템에서는 모듈간의 상호작용으로 데이터를 주고 받는다. 이때 오류가 포함된 리소스 데이터를 전달하면 시스템의 실행 오류를 유발할 수 있다. 상호작용에 활용되는 리소스들은 모듈간의 의존관계를 만들며 의존관계에 있는 모듈의 변화가 다른 모듈의 기능에 영향을 미치게 된다. 몇몇 임베디드 시스템 조사 자료에 따르면 모듈간의 상호작용 오류가 심각한 소프트웨어 실패의 원인이 되기도 한다. 상호작용 테스팅 단계에서는 이러한 상호작용 오류를 검출하여 시스템 실패의 위험을 낮추고자 한다. 모듈간의 상호작용은 직접 또는 간접적으로 일어난다. 직접적인 상호작용은 모듈의 직접 호출을 통해 이루어지며, 간접 상호작용은 직접호출 이외에 리소스 데이터의 의존성을 통해 나타난다. 이 연구에서는 직접 상호작용에 의한 오류 검출 방식에서는 발견되지 않는 간접 상호작용과 연관된 오류를 검출하고자 한다. 먼저 상호작용 패턴을 분석하여 상호작용 모델을 생성하고 이를 기반으로 상호작용 오류를 검출하는 테스트 케이스 디자인 방법을 제안한다. 마지막으로 결함 주입 기법을 이용하여 제안된 방법의 효용성 및 실효성을 분석한다.

• 한국임상약학회지
• /
• 제29권4호
• /
• pp.223-230
• /
• 2019

Background: Small-molecule tyrosine kinase inhibitors (TKIs) have had major impacts on anticancer therapy by targeting the catalytic activities of dysregulated tyrosine kinases. TKIs have not presented traditional toxicities; however, some serious adverse effects, including hepatotoxicity, have been documented in clinical trials and post-marketing surveillance. Although TKI-induced hepatotoxicity can cause severe clinical complications in patients, the underlying mechanism is still unclear. Methods: Studies on TKI-induced hepatotoxicity were identified by Pubmed search, and relevant articles were reviewed. Results: Immunoallergic reaction, cytochrome P (CYP) 450 polymorphisms, and formation of reactive metabolites are under consideration as mechanisms of TKI-induced hepatotoxicity. Host protein-drug metabolite conjugates are recognized as antigens by class II major histocompatibility complexes and are believed to cause liver injuries. Polymorphisms in CYP, which influences TKI metabolism, can slow TKI metabolism and may induce development of hepatotoxicity. The formation of reactive metabolites during drug metabolism can induce hepatotoxicity by directly causing cytotoxicity, leading to cell dysfunction, and indirect toxicity by mediating secondary immune reactions. Concurrent use of various medications with TKI can also cause hepatotoxicity by affecting drug transporter or enzyme activities. Conclusion: Periodic monitoring of patients taking TKIs and risk/benefit reassessments though post marketing surveillance are necessary to prevent hepatotoxicity.

• Industrial Engineering and Management Systems
• /
• 제14권1호
• /
• pp.58-72
• /
• 2015

A primary concern of national R&D plans is to encourage technological development in private firms and research institutes. For effective R&D planning and program support, it is necessary to assess technological impacts that may exist both directly and indirectly among technology areas within the whole technology system; however, previous studies analyze only direct impacts among technologies, failing to capture both direct and indirect impacts. Therefore, this study proposes an approach based on decision-making trial and evaluation laboratory (DEMATEL) to identifying specific characteristics of technology areas, such as technological impact and degree of cause or effect (DCE). The method employs patent co-classification analysis to construct a technological knowledge flow matrix. Next, to capture both direct and indirect effects among technology areas, it incorporates the modified DEMATEL process into patent analysis. The method helps analysts assess the technological impact and DCE of technology areas, and observe their evolving trajectories over time, thereby identifying relevant technological implications. This study presents a case study using Korean patents registered during 2003-2012. We expect our analysis results to be helpful input for R&D planning, as well as the suggested approach to be incorporated into processes for formulating national R&D plans.