• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1309-1312
• /
• 2005

A multi-chemical supply system is developed and applied to a wet station, which uses the multi-chemical process in one bath. To control the concentration of two chemicals, control logic of a supply pump is programmed using the programable logic controller (PLC). By using the multi-chemical supply system, wet station with single bath is applied to cleaning process using multi chemicals such as buffed oxide etchant (BOE) and standard clean 1 (SC-1). The concentration of each chemical is measured in the bath to verify the multi-chemical supply system. The control range in the each chemical concentration is measured to 1.33weight% in NH4OH and 0.23weight% in H2O2. The multi-chemical supply system can be movable and usable as an independent module of fixed wet station. By simply midifying the PLC, a multi-chemical supply system can be developed for a wet station.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.3
• /
• pp.429-436
• /
• 2003

Pediocin K1 is a bacteriocin produced by Pediococcus sp. KCA 1303-10, isolated from traditionally fermented flatfish in Korea. Pediocin K1-dependent antibiosis and pediocin K1-independent antibiosis against Listeria monocyrogenes were investigated by comparing antibiosis potential of the ped＋ wild-type strain of Pediococcus sp. KCA1303-10 with that of the ped- mutant strain in 3 different media at 3 different temperatures. In the synthetic MRS-APT medium, bacteriocin (pediocin K1)-dependent antibiosis (BDA) acted as the major driving force of overall antibiosis at the initial stage before the pH of the media was not sufficiently lowered, while bacteriocin-independent antibiosis (BIA) took over the major role at the late stage of antibiosis by killing otherwise resistant cells in the modium. The role of BDA increased as the temperature of the system decreased. The antibiosis potential of BDA among the overall antibiosis of Pediococcus against Listeria at $37^{\circ}C$ was calculated as 46%, and as 75% at $25^{\circ}C$. In the skim milk medium, antibiosis of Pediococcus against Listeria was weakened more than 4 log cycles compared to that of the synthetic medium; however, BDA worked as the main antibiosis force regardless of the culturing temperature in the skim milk medium. In the bean soup medium, BDA also worked as the major killing mechanism against Listeria, but BIA played as another suppressing mechanism against otherwise pediocin-resistant Listeria population. These results suggest that a large portion of the inhibitory action of the ped+Pediococcus sp. KCA1303-10 was attributable to the bacteriocin produced by the strain and that viable Pediococcus sp. KCA1303-10 was superior to the purified bacteriocin in suppressing the occurrence of the bacteriocin-resistant Listeria monocytogenes in food systems.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.4
• /
• pp.472-480
• /
• 2014

The In solar power system, the height and azimuth of the sun are important parameters which control generated power magnitude. The tracking method that controls the daily generation magnitude according to latitude and longitude using the two axles is often used in the existing sunlight tracking system today. In this two-axle PV track control system, the self-load is concentrated on one FRAME. It is influenced of the regular load, snow load and the wind load, etc. It is difficult to set up the system in the conventional building. This research is a development about the small-scale economy track device of independent load-dispersing solar generation system. The position tracking algorithm is through new coordinates transformation calculating the height and azimuth of the sun.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.280-282
• /
• 2004

According as IT environment changes from client/server system to the open system based on web service technologies, the exchange of data and services between independent applications and service servers in web environment is observed Recently. In this points, it is necessary that Geographic Information Systems, Spatial Imagery Information Systems, Intelligent Transportation Systems, and Global Navigation Satellite Systems based on the location and geometry information are inter-related each other. But, the inter-relation of these systems is very difficult because of the closed system architecture, different information format, and the absence of interoperability technologies. In this Paper, we describe 4S integration system based web service technologies that accept the international standard as WFS, WCS, WRS of OGC (OpenGIS Consortium) and UDDI, SOAP, WSDL of W3C. In detail, we study the system architecture design and implementation of traffic information service, routing service, and tracing service. These services are consisting of the data schema based on XML and GML, various functions of each layered service, each server platform, and web server. Specially, we represent that GML is being applied to a wide range of location-based services, telematics, and intelligent transportation

• Journal of Powder Materials
• /
• v.19 no.4
• /
• pp.297-303
• /
• 2012

In this study, voltammetry system for realizing high sensitivity nano-labeled sensor of detecting heavy metals was designed, and optimal system operating conditions were determined. High precision digital to analog converter (DAC) circuit was designed to control applied unit voltage at working electrode and analog to digital converter (ADC) circuit was designed to measure the current range of $0.1{\sim}1000{\mu}A$ at counter electrode. Main control unit (MCU) circuit for controlling voltammetry system with 150 MHz clock speed, main memory circuit for the mathematical operation processing of the measured current value and independent power circuit for analog/digital circuit parts to reduce various noise were designed. From result of voltammetry system operation, oxidation current peaks which are proportional to the concentrations of Zn, Cd and Pb ions were found at each oxidation potential with high precision.

• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.109-114
• /
• 2024

Enterprise storage systems that require high data reliability are applying RAID (Redundant Array of Independent Disks) systems to recover from data loss and failure. In particular, RAID 5 ensures space efficiency and reliability by distributing parity across multiple storage devices. However, when storage devices have different capacities, RAID is built based on the smallest capacity storage device, resulting in wasted storage space. Therefore, research is needed to solve this resource management problem. In this paper, we propose a method for RAID grouping of each independent NAND flash memory block in a RAID consisting of SSD (Solid State Disk) with external SSDs as well as internal SSDs. This method is divided into a policy for delivering block information inside SSDs to the RAID system and a policy for RAID grouping of physical addresses delivered from the RAID system. This method allows us to maintain a RAID that does not waste resources when SSDs of different capacities are grouped into RAID5. Finally, we demonstrate the effectiveness of the proposed method through experiments.

• Journal of Korean Society for Quality Management
• /
• v.37 no.3
• /
• pp.54-64
• /
• 2009

This study conducts an empirical analysis of how the suggestion activity, most widely used in quality control activities, interacts with the dimensions of learning organizations. The study also attempts to analyze the results of Six Sigma based on sub-dimensions of learning organizations, which are infrastructure, culture and system. In order for learning and innovation to take place in implementing a Six Sigma program, the organizational infrastructure and culture are created and sustained and then, a learning organization system would become effective. In this study, a empirical model is used to demonstrate such an association. The sample consists of 134 organizations who have implemented a Six Sigma program for more than three years. Using the version 16.0 of AMOS for structural equation modeling, the study estimates the structural equation model that has a Six Sigma organization's infrastructure, culture and system as independent constructs, the suggestion system as a mediator, and the performance of Six Sigma projects as a dependent construct.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.12
• /
• pp.1609-1616
• /
• 2001

We present an autostereoscopic 3D display system using volume hologram. In this proposed system, the interference pattern of angular multiplexed plane reference and object beams are recorded into a volume hologram, which plays a role of guiding object beams of multi-view images into the desired perspective directions. For reconstruction, object beams containing the desired multi-view image information, which satisfy Bragg matching condition, are illuminated in the time-division multiplexed manner onto the crystal. Then multiple stereoscopic images are projected to the display plane for autostereoscopic 3D viewing. It is possible to make a high resolution multiview 3D display system independent upon the viewpoint.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.569-574
• /
• 1991

Methyl red diffusion in polymer solutions was studied by a transient holographic method, forced Rayleigh scattering. In semi-dilute solutions of a polystyrene, where no specific interaction with the probe exists, we found within experimental uncertainty that the retardation of diffusion rate of methyl red is independent of the solvents used. This indicates that the hydrodynamic interaction in polymer coils is not affected by the nature of solvents enough to exhibit a detectable change in the diffusion rate of the probe. On the other hand, a substantial reduction of diffusion rate was observed in poly(methyl methacrylate) solutions in toluene. Together with the similar observation reported with poly(vinyl acetate), it is confirmed that hydrogen bond between the probe and the polymer is responsible for the retarded diffusion. The decay-growth-decay profile found in this system reveals a finite difference in diffusion coefficients of cis and trans isomer of methyl red. We estimate the difference and suggest that the cis isomer interacts with the polymer more strongly than the trans isomer.

• Imaging Science in Dentistry
• /
• v.49 no.2
• /
• pp.97-102
• /
• 2019

Purpose: This study was conducted to evaluate the effect of different spatial resolutions of a photostimulable phosphor plate (PSP) radiography system on the detection of proximal caries lesions. Materials and Methods: Forty-five extracted human permanent teeth were radiographed using a PSP system (VistaScan Perio Plus) and scanned at the 4 resolutions (10 lp/mm, 20 lp/mm, 25 lp/mm, and 40 lp/mm) available in the system. Three independent examiners scored the images for the presence and absence of proximal caries lesions using a 5-point scale. The presence or absence of caries was confirmed by histological sections of the examined teeth (defined as the gold standard). Intra- and inter-observer reproducibility was calculated by the weighted kappa test. One-way analysis of variance with the post hoc Tukey test was used to compare the area under the receiver operating characteristic curve for the classifications made with each resolution. Results: For the detection of enamel lesions, the spatial resolution of 10 lp/mm was significantly superior to the other resolutions. However, the spatial resolution did not affect the detection of caries lesions in dentin (P>0.05). Conclusion: Spatial resolution may influence the accuracy of the detection of incipient caries lesions in radiographs with PSP plates. Images with low spatial resolution seem to be more appropriate for this purpose.