• 한국전자거래학회지
• /
• 제6권3호
• /
• pp.127-148
• /
• 2001

As the Internet service is expanding rapidly, portal sites, a gateway tn the net, are attracting increasing attention these days. As the Internet service has expanded rapidly, so has the interest for portal sites,, which serve as a gateway to the net. Despite the tendency, however, research on a measure by which to evaluate the quality of portal sites or development of such measures has not been fully pursued. As online services, faced with profitability, are considering 'charge per view', the development of a set of quality evaluation measures for portal services will prove to become a valuable instrument in constructing competitive strategies that are vital for survival and growth of a firm. In that regard, this study aims to develop a set of evaluation measures for Internet portal sites by empirically investigating the most common offline measures for quality of services, SERVQUAL, retail SERVQUAL and other evaluation measures for IT-related online services. Moreover, the study offers the strategic implications of the defined measures.

• 대한수학회논문집
• /
• 제30권1호
• /
• pp.7-21
• /
• 2015

We give the characterization of H$\ddot{o}$lder differentiability points and non-differentiability points of the Riesz-N$\acute{a}$gy-Tak$\acute{a}$cs (RNT) singular function ${\Psi}_{a,p}$ satisfying ${\Psi}_{a,p}(a)=p$. It generalizes recent multifractal and metric number theoretical results associated with the RNT function. Besides, we classify the singular functions using the singularity order deduced from the H$\ddot{o}$lder derivative giving the information that a strictly increasing smooth function having a positive derivative Lebesgue almost everywhere has the singularity order 1 and the RNT function ${\Psi}_{a,p}$ has the singularity order $g(a,p)=\frac{a{\log}p+(1-a){\log}(1-p)}{a{\log}a+(1-a){\log}(1-a)}{\geq}1$.

• 품질경영학회지
• /
• 제37권3호
• /
• pp.123-139
• /
• 2009

This study examines the relative efficiency of 34 local public medical centers in Korea. In order to concretely grasp the causes of inefficiency and suggest improvement solutions, the desirable set point was established based on the actual value which needs to be improved. As a result of analysis, we determined that output must be increased while input is held constant in order to improve effectiveness through the actual value and set point. Efficiency cannot be achieved if input is augmented solely to increase output. Also, to increase output, the medical centers need to improve their quality without increasing any input for customer visits and hospitalizations. Further, in order to strategically promote effectiveness and efficiency of local public medical centers, these medical centers must focus on input resource and patient interchange through the mutual cooperation with local private hospitals and university medical centers.

• 한국생산제조학회지
• /
• 제25권1호
• /
• pp.21-29
• /
• 2016

To overcome the large ring gear manufacturing problems seen in slewing bearings and girth gears, pin gear drive units have been developed. Among them, a novel slewing bearing with an internal pinwheel gear set (i-PGS) is introduced in this paper. First, we consider the exact cam pinion profile of i-PGS with the introduction of a profile shift coefficient. Furthermore, a new root relief profile modification for the i-PGS cam pinion is presented. Then, the contact stresses are investigated to determine the characteristics of the surface fatigue by varying the shape design parameters. The results show that the contact stresses of i-PGS can be reduced significantly by increasing the profile shift coefficient. In addition, the contact ratio, a measure of teeth overlapping action, decreases with the decrease of the allowable pressure angle.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권12호
• /
• pp.561-565
• /
• 2001

Recent trend of increasing automated factories needs supply of high quality power from the utilities. Among the items of the power quality, voltage sag can be compensated by Dynamic Voltage Restorer(DVR). The key feature of the DVR is high response with less transient period to recover from the voltage sag due to the lightning or line-to-ground faults. In this paper we report that $H_{\infty}$ controller is very promising for the practical application to the controller of DVR. Experimental results shown in this paper was obtained by applying the control algorithm to 20 kVA DVR system. The experimental set consists of IGBT-based three phase inverter and the TMS320C32-60 DSP used for main processor of the control board. To simulate the 50% voltage sag, the SCR-based experimental set was constructed.

• 한국시뮬레이션학회논문지
• /
• 제5권1호
• /
• pp.91-106
• /
• 1996

Control Variate (CV) is very useful technique for variance reduction in a wide class of queueing network simulations. However, the loss in variance reduction caused by the estimation of the optimum control coefficients is an increasing function of the number of control variables. Therefore, in some situations, it is required to select an optimal set of control variables to maximize the variance reduction . In this paper, we develop the Adaptive Control Variates (ACV) method which selects an optimal set of control variates during the simulation adatively. ACV is useful to maximize the simulation efficiency when we need iterated simulations to find an optimal solution. One such an example is the Simulated Annealing (SA) because, in SA algorithm, we have to repeat in calculating the objective function values at each temperature, The ACV can also be applied to the queueing network optimization problems to find an optimal input parameters (such as service rates) to maximize the throughput rate with a certain cost constraint.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1384-1387
• /
• 1996

SCPI(Standard Commands for Programmable Instrument) is a standard command sets designed for controlling various types of instruments. In order to control FFT(Fast Fourier Transform) analyzing device using SCPI it is required to support sweep measurement function. We defined SCPI command set for FFT analysis and developed parser of defined command set using lex(Lexical Analyzer Generator) and yacc(Yet Another Compiler Compiler). After developing FFT analyzing test was performed with that parser. Up to audible signal frequency the result of FFT analysis was accurate and that result was agree with that of conventional FFT analyzer. As a result it is proved that various types of instruments including sweep measurement instrument can be controlled with appropriate SCPI command sets. Also when developing new instruments the method used in this experiment will contribute to reducing the time required to develop the SCPI parser and increasing reliability.

• 디지털콘텐츠학회 논문지
• /
• 제3권1호
• /
• pp.89-99
• /
• 2002

포화 경로 선정 알고리즘은 주로 전술적 응용 및 패킷 라디오 망에 유용한 경로 선정 알고리즘으로 알려져 있는데, 이유는 통화로 개설 시간이 짧고 경로 선정 테이블을 갖고 있지 않기 때문이다. 통신망 효율 면에서는 통제 메시지의 오버 해드로 인해 약점이 있기도 하다. 본 논문에서는 4개의 링크로 구성된 격자형 전술 회선 교환망에 두개의 우선 순위 음성 트래픽을 갖는 망을 고려하였다. 최소 1차 미분 길이를 갖는 경로를 이용하여 통화로 개설 시간 및 알고리즘 처리 부하를 증가 시키지 않으면서 회선망의 차단 확률을 향상 시켰다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.482-485
• /
• 2006

The response of a reinforced concrete element under cyclic shear is characterized by the hysteretic loops of the shear stress-strain curves. These hysteretic loops can exhibit strength deterioration, stiffness degradation, and a pinched shape. Recent tests have shown that the orientation of steel grids in RC shear elements has a strong effect on the "pinching effect" in the post-yield hysteretic loops. When the steel grid was set at a 45 degree angle to the shear plane, there was no pinching effect and no strength deterioration. However, when the steel grid was set parallel to the shear plane, there was a severe pinching effect and severe strength deterioration with increasing shear strain magnitude. In this paper, two RC elements subjected to revered cyclic shear stresses are considered to study the effect of the steel grid orientation. The presence and absence of the pinching mechanism in the post-yield shear hysteretic loops is studied using the Rotating Angle Softened Truss Model (RA-STM) theory.

• 한국지능시스템학회논문지
• /
• 제7권2호
• /
• pp.79-86
• /
• 1997

자동화기술 및 정보통신의 급속한 발전 등의 환경 변화에 따라 컴퓨터를 기반으로 하는 통합생산 시스템 구축의 필요성이 급격히 증가하고 있다. 본 논문에서는 컴퓨터 통합생산(CIM)시스템을 구축하기 위한 제안 요구서에 따라 각 업체에서 제안한 업체별 구현방법을 효율적으로 평가하기 위하여 퍼지집합을 이용한 컴퓨터통합생산시스템의업체별 평가 방법을 제안한다.