• Journal of applied mathematics & informatics
• /
• 제28권5_6호
• /
• pp.1171-1184
• /
• 2010

In this paper, by using fixed point theorems in cones, the existence of positive solutions is considered for nonlinear m-point boundary value problem for the following second-order dynamic equations on time scales $({\phi}(u^{\Delta}))^{\nabla}+a(t)f(t,\;u(t))=0$, t $\in$ (0, T), $u(0)=\sum\limits^{m-2}_{i=1}a_iu(\xi_i)$, $\phi(u^{\Delta}(T))=\sum\limits^{m-2}_{i=1}b_i{\phi}(u^{\Delta}(\xi_i))$, where $\phi$ : R $\rightarrow$ R is an increasing homeomorphism and positive homomorphism and ${\phi}(0)=0$. In [27], we obtained the existence results of the above problem for an increasing homeomorphism and positive homomorphism with sign changing nonlinearity. The purpose of this paper is to supplement with a result in the case when the nonlinear term f is nonnegative, and the most point we must point out for readers is that there is only the p-Laplacian case for increasing homeomorphism and positive homomorphism due to the sign restriction. As an application, one example to demonstrate our results are given.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.421-428
• /
• 2007

Many engineering problems on the pipeline flow use continuity, energy, friction loss head equation. To calculate friction loss head in a pipeline, Darcy-Weisbach and many average velocity equations can be used and Hazen-Williams equation is used frequently in the pipe network for the water supply systems. Darcy-Weisbach equation is a general one acquired from applying Bernoulli's equation in the pipeline flow and Hazen-Williams equation is a experimental one in case that pipe velocity is below 3m/sec and pipe diameter is over 50mm. In this study, comparing Darcy-Weisbach with Hazen-Williams equation, relation f and C that are expressed as roughness coefficients of those equations is explained. Next, head losses calculated from using those equations are compared and those are applied in realistic pipelines. Comparing f with C, the f is decreasing linearly according to increase of the Reynolds number Re and increasing in case the C is decreasing. additionally, the C is increasing up to a point and then is decreasing according to increase of the Re. Next, the C is increasing and Re's range for increase of the C lengthens in case of decreasing of the relative roughness ${\varepsilon}/d$. Comparing head losses acquired from the two equations, head loss appears large in case that the C is decreasing and the ${\varepsilon}/d$ is increasing. additionally, Head loss calculated by the Darcy-Weisbach equation varies larger than one by Hazen-Williams equation in regard of the Re. Next, change aspect of head loss acquired by the C is distinguished more clearly than the one by the ${\varepsilon}/d$.

• 보건행정학회지
• /
• 제11권3호
• /
• pp.46-70
• /
• 2001

Medical Aid expenditure Increased rapidly at a higher rate than that of Medical Insurance during the period 1992-1999. To establish an effective cost containment strategy, knowledge of the cause and the nature of the increase of Medical Aid expenditure is required. The purpose of this study was to analyze increasing rates of Medical Aid expenditure by the components of medical expenses. Data were collected using the Medical Aid Statistical Yearbook during the period of 1992-1999. The major findings were as follows: 1. The annual mean increasing rate of Medical Aid expenditure between 1992 and 1999 was 22.8%, which exceeding that of Medical Insurance expenditure (17.5%) between 1992 and 1999. Since 1998, Medical Aid expenditure increased even more rapidly than in previous years, with the increase in number of Medical Aid beneficiaries. 2. Of Medical Aid expenditure, that of inpatient and outpatient annually increased 24.2% and 22.8% respectively and that of type 1 and type 2 increased annually 28.8% (outpatient) ∼29.9% (inpatient), 14.3% (outpatient) ∼ 15.5% (inpatient). Therefore, Medical Aid expenditure of inpatient and type 1 led the increase of Medical Aid expenditure. 3. Between 1992 and 1997, the frequencies of utilization per beneficiary and the charges per case positively contributed to the increase of Medical Aid expenditure while the number of beneficiaries contributed negatively, but since 1998, the number of beneficiaries increased and positively contributed to the increase of Medical Aid expenditure. 4. According to the analysis of the charges per case, the increase of the price index led to the increase of the charges per case but the days of medication and service intensity also contributed to the increase of the charges per case variably by year. Considering the above findings, factors associated with the Medical Aid system affected the increase of Medical Aid expenditure in addition to the general factors of the increase in medical expenditure. In conclusion, it appears that a more intensive cost containment strategy is required to control rapidly increasing Medical Aid expenditure. For this, more precise analysis and development of policy considering the effect of the number of beneficiaries and the increase of price index is needed.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.837-842
• /
• 2015

In this study, the characteristics of electrostatic attenuation in plain shape glass filament sample (0.29 mm thickness, cross section of $12.25cm^2$, $16cm^2$, $20.25cm^2$) for insulator has been measured at temperature of $5^{\circ}C{\sim}38^{\circ}C$, humidity of 50%~90%. The results of this study are as follows. In case of samples that the cross section is $12.25cm^2$, $16cm^2$, $20.25cm^2$ at humidity of 50%~90%, it found that the electrification voltage of electrostatic increased with increasing temperature, with a return to decrease at $20^{\circ}C$. In case of samples that the cross section is $12.25cm^2$, $16cm^2$, $20.25cm^2$ at temperature of $5^{\circ}C{\sim}38^{\circ}C$, it found that the electrification voltage of electrostatic decreased with increasing humidity. In case of the sample at temperature of $20^{\circ}C$ and humidity of 65%, 75%, it found that the electrification voltage of electrostatic increased with increasing cross section. In case of the sample at humidity of 65% and cross section of $12.25cm^2$, the time that it takes to reduce electrification voltage of electrostatic in half decreased to 0.912s, 0.736s, 0.673s with increasing temperature to $10^{\circ}C$ $20^{\circ}C$, $30^{\circ}C$.

• Journal of Preventive Medicine and Public Health
• /
• 제16권1호
• /
• pp.19-24
• /
• 1983

In order to study the effects of iron and zinc on the lead poisoning of rats, lead with iron and zinc, or lead alone were administered orally to a total of 98 adult rats of Sprague-Dawley Species. The concentrations of lead, zinc, and iron were measured by atomic absorption spectrophotometer at every 20 days intervals of 20th, 40th, 60th, 80th and 120th day as a final measurement. Those datas were analysed and compared with those of control groups. The results were summarized as follows; 1. The concentration of lead in blood, bone. and liver tissues kept increasing in case of lead exposure group whereas it started decreasing at 60-80th day when concentration of zinc started increasing in case of combined exposure group. However, in kidney tissue, the concentration of lead in combined exposure group kept increasing up to the end of observation showing special high concentration at the final measurement at 120th day. 2. Concentration of zinc in blood and liver tissues had increased from 60-80th day in case of combined exposure group. 3. Concentration of iron in blood showed decreasing from $44.15{\pm}9.67\;to\;32.44{\pm}2.69{\mu}g/ml$ in case of lead exposure group, whereas it showed constant level of $47.50{\sim}45.65{\mu}g/ml$. However, in liver tissue it kept constant as control did from 40th to 60th days, but from 100th day on it started increasing to show much higher concentration than control.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.33-37
• /
• 2003

The objective of the present work is to examine the variation of cooling characteristics due to the Weber number of droplet on a heated surface. The surface temperatures varied from 72.5 - $106.1^{\circ}C$ on steel and Teflon, when Weber number was 60, 180, 300. The results are as follows; In the case of the same droplet size, the initial temperature of solid increases the indepth temperature of solid more drop. In the case of the same surface temperature, Weber number increases with increasing the cooling effect of droplet. The time-average heat flux increases with increasing the initial temperature of solid and Weber number. The evaporation time decreases with increasing the initial temperature of solid and Weber number.

• 한국응용과학기술학회지
• /
• 제24권3호
• /
• pp.246-252
• /
• 2007

$BaTiO_3$ powders were prepared by sol-gel method from different concentration of KOH aqueous solution and Ba/Ti molar ratio. Particle shape, size and crystal structure of prepared $BaTiO_3$ powders were analyzed by SEM, XRD, and FT-IR. As the result of KOH concentration changing, spherical particles were obtained by condition more than 3 M and particle size decreased as concentration increasing. Different appearance showed between dried and sintered powders against changing of Ba/Ti molar ratio. In case of dried powders, the crystallinity decreased as molar ratio increasing. On the other hand, increased as molar ratio increasing in case of sintered powders.

• 한국환경과학회지
• /
• 제12권3호
• /
• pp.337-344
• /
• 2003

The photodegradation of pyrene, chrysene and benzo［a］pyrene, that were similar in structure among poly-cyclic aromatic hydrocarbons (PAMs), were investigated in water irradiated with a low-pressure mercury lamp (wavelength of 253.7 nm and UV output of 1.35 ${\times}$ 10$\^$-3/J/s). The effects of several factors (t-BuOH, HCO$_3$$\^$-/ and pH) on photodegradation of above three PAHs were also examined. The photodegradation rates of PAHs decreased with increasing the concentration of t-BuOH, but decreased little with increasing the concentration of HCO$_3$$\^$-/ under the concentrations used in this study. The photodegradation rates of PAHs decreased with increasing pH, but their change were greater in case of pH increase from acid to neutral and were little in case of pH increase from neutral to base. The photodegradation rates of PAMs fitted a first-order kinetic model and their photodegradation rates decreased in the following sequences: pyrene>chrysene>benzo[a]pyrene among the PAHs used.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.33-36
• /
• 2005

Colloidal Silica(CS)/silane sol solutions were prepared in variation with synthesizing parameters such as ratio of CS to silane and reaction time. In the case of LHSA CS/tetramethoxysilane(TMOS)/methyltrimethoxysilane(MTMS) CS/silane sol, coating film had stable contact angle with increasing reaction time excepting for 48hours. Also, the LHSA CS/TMOS/MTMS coating film had more enhanced flat surface with increasing the amount of MTMS and increasing reaction time. In the case of thermal stability, thermal dissociation of LHSA CS/MTMS sol did not occur up to $550^{\circ}C$.

• 음성과학
• /
• 제1권
• /
• pp.27-38
• /
• 1997

The differences in French Intonation between French and Korean learners can be applied to French intonation education. One native French speaker and three native Korean speakers who learned French language at High school were selected for this study. The subjects spoke test phrases based on the different syntactic structures. High-Speed speech Analysis system(RILP) was used for this experiment. The different intonation curves were showed at the end of phrase and at the beginning of phrase between French and Korean learners. At the end of phrases, French intonation appeared to have increasing and decending pitch contours in the case of wh-question, exclamation and finality. However, Korean learner's intonation showed only increasing pitch contours. At the beginning of phrase, French intonation shows decending pitch contours in the case of minor continuation and command. In contrast, Korean learner's intonation appeared to have increasing pitch contours. The new intonation training system using PC can have great effect on education of French as a second language.