• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.163-172
• /
• 2000

In this study, the scattered far-field due to a cavity embedded in infinite media subjected to the incident SH-wave was calculated by the boundary element method. The effects of cavity shape and distance between internal cavity and internal point in infinite media were considered. The scattered far-field of the frequency domain was transformed into the signal of the time domain by using the Inverse Fast Fourier Transform(IFFT). It was found that the amplitude of scattered signal in time domain decreased with the increase of the distance between the detecting points of ultrasonic scattered field and the center of internal cavity in media. In addition, the time delay was clearly found in time domain waveform as the distance between the detecting points of ultrasonic scattered field and the center of internal cavity was gradually increased.

• Journal of information and communication convergence engineering
• /
• 제13권2호
• /
• pp.74-80
• /
• 2015

In cognitive radios, spectrum sensing plays an important role in accurately detecting the presence or absence of a licensed user. However, the intervention of malicious users (MUs) degrades the performance of spectrum sensing. Such users manipulate the local results and send falsified data to the data fusion center; this process is called spectrum sensing data falsification (SSDF). Thus, MUs degrade the spectrum sensing performance and increase uncertainty issues. In this paper, we propose a method based on the Hausdorff distance and a similarity measure matrix to measure the difference between the normal user evidence and the malicious user evidence. In addition, we use the Dempster-Shafer theory to combine the sets of evidence from each normal user evidence. We compare the proposed method with the k-means and Jaccard distance methods for malicious user detection. Simulation results show that the proposed method is effective against an SSDF attack.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 추계종합학술대회논문집
• /
• pp.77-80
• /
• 2000

본 논문에서는 두 대의 디지틀 카메라로 측정한 근거리 차량 스테레오 영상에서 시차(disparity)를 구한 후 전방 차량의 거리를 검출하는 방법을 제시한다. 다중 해상도 특성을 가진 변형된 웨이블릿을 이용하여 차량으로 생각되는 물체의 경계선을 구한다. 이때 전체적인 특징을 고려하고, 정확한 시차를 구하기 위해 점차적으로 해상도를 높이는 coarse to fine 방법을 이용하여 히스토그램을 분석하고 이를 통하여 얻어진 좌, 우 영상의 시차를 이용하여 전방 근거리 차량의 거리를 효과적으로 검출한다.

• BioChip Journal
• /
• 제12권4호
• /
• pp.340-347
• /
• 2018

$F{\ddot{o}}rster$ resonance energy transfer (FRET) is extremely sensitive to the separation distance between the donor and the acceptor which is ideal for probing such biological phenomena. Also, FRET-based probes have been developing for detecting an unamplified, low-abundance of target DNA. Here we describe the development of FRET based DNA sensor based on an accumulated QD system for detecting KRAS G12D mutation which is the most common mutation in cancer. The accumulated QD system consists of the polystyrene beads which surface is modified with carboxyl modified QDs. The QDs are sandwich-hybridized with DNA of a capture probe, a reporter probe with Texas-red, and a target DNA by EDC-NHS coupling. Because the carboxyl modified QDs are located closely to each other in the accumulated QDs, these neighboring QDs are enough to transfer the energy to the acceptor dyes. Therefore the FRET factor in the bead system is enhancing by the additional increase of 29.2% as compared to that in a single QD system. These results suggest that the accumulated nanobead probe with conjugated QDs can be used as ultrasensitive DNA nanosensors detecting the mutation in the various cancers.

• Physical Therapy Rehabilitation Science
• /
• 제2권1호
• /
• pp.31-38
• /
• 2013

Objective: To determine the efficacy and reliability of measuring direct current microcurrent applied through the skin to determine injury in the underlying tissues. Design: Case control study. Methods: First, microcurrent was measured as decreased blood flow induced hypoxia in healthy subjects. Next, reliability was assessed by measuring over ten days with set variations in pressure and distance between the electrodes. Finally, measurements over sprained ankle were compared to measurements over comparable uninjured areas on the same injured subject. Results: For the blood flow test phase, microcurrent significantly decreased an average of 17% after 5 minutes (p<0.05), remained decreased for 30 seconds, and returned to non-occlusive levels after 2 minutes of normal circulation. The results indicate that the microcurrent decrease was not due to blood flow, and most likely from hypoxic cellular damage. For the reliability phase, the coefficients of variation averaged 10.3% for the shoulder, 14.8% for the low back, and 29.1% for the knee. Changing distance 2.5 cm between the electrodes resulted in insignificant changes. Changes in pressure had some significant effect after an increase in force of 2.6 N, affirming the need for consistent pressure for measurement. For the injury test phase, a significant 69% decrease occurred comparing injured areas to the same area on the uninjured side, and a significant 74% occurred comparing injured and non-injured areas on the same limb. Conclusions: Microcurrent through the skin shows promise as an objective method of assessing a soft tissue injury by detecting damage likely due to hypoxia.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 춘계학술대회 논문집
• /
• pp.1-8
• /
• 1995

This paper proposed a simple method for measuring surface roughness of ground surface. utilizing non-contact in-process measuring system using the diode laser. The measurement system is consisted of a laser unit with a diode laser and a cylindrical lens a detecting unit with polygon mirror and CCD array sensor. and a signal processing unit with a computer and device. During operation, this measuring system can provide information on surface roughness in the measuring distance with a single sampling and simultanilusly monitor the state of the grind wheel. The experimental results, showed that the increase of the feed rate and the dressing speed an caused increase in the surface roughness and when the surface roughness is 4Rmax-10Rmax, the cutting speed is 1653m/min-1665m/min. the feed rate is 0.2m/min-0.9m/min, the dressing speed is 0.2mm/rev-0.4mm/rev, the stylus method and the in-process method can be obtained the same results. thus under limited working conditions. using the proposed system. the surface roughness of the ground surface during cylindrical grinding can be obtained through the in-process measurement method using the diode laser.

• 한국안전학회지
• /
• 제10권3호
• /
• pp.30-41
• /
• 1995

This paper proposed a simple method for measuring surface roughness of ground surface. Utilizing non-contact in-process measuring system using the diode laser. The measurement system is consisted of a laser unit with a diode laser and a cylindrical lens, a detecting unit with polygon mirror and CCD array sensor, and a signal processing unit with a computer and device. During operation, this measuring system can provide information on surface roughness in the measuring distance with a single sampling and simultaniously monitor the state of the grind wheel. The experimental results, showed that the Increase of the feed rate and the dressing speed an caused increase in the surface roughness and when the surface roughness is 4Rmax-10Rmax, the cutting speed is 1653m/min-1665m/min, the table speed is 0.2n1/min -0.9m/min, the dressing speed is 0.2mm/rev～0.4mm/rev, the stylus method and the in-process method can be obtained the same results. Thus, under limited working conditions, using the proposed system, the surface roughness of the ground surface during cylindrical grinding can be obtained through the in-process measurement method using the diode laser.

• 한국재난정보학회 논문집
• /
• 제19권1호
• /
• pp.10-17
• /
• 2023

연구목적: 본 논문에서는 IR-UWB를 활용하여 실내 위치 추정을 위한 거리 추정 기술을 제안하고 연구 수행한다. 실내 환경에서 clutter(클러터)나 noise(노이즈) 환경으로 인해 낮아진 목표 신호의 검출과 세기를 높일 수 있는 알고리즘을 제안한다. 연구방법: 클러터 억제와 미약 신호를 검출하기 위해 기존 연구인 Background Remover, Corelation, Singular Vector Decomposition 연구를 분석하고 알고리즘을 제안한다. 알고리즘의 평가를 위해 일반 실내 건물에서 2~11.5m 까지 목표물을 측정하는 실험을 진행하고 평균 에러율을 통해 성능평가 및 검증을 진행한다. 연구결과: 제안하는 알고리즘을 통해 11.5m까지 평균에러 0.57m, 6m이상에서 11.5m까지 에러율 0.49m였다. 기존 연구 대비하여 평균 에러율 약 1m를 줄이는 결과를 보였다. 결론: 본 연구에서 제안하는 알고리즘을 실험을 통해 검증했다. 거리나 위치 추정을 위한 클러터, 노이즈 환경에서 미약 신호 검출하는 기법으로 활용이 가능할 뿐 아니라 투과성이 높은 UWB 레이더를 활용하여 제난 상황에서 인명을 피해를 줄이기 위한 인명 검출 기법으로 활용될 수 있다.

• 실천공학교육논문지
• /
• 제9권1호
• /
• pp.15-21
• /
• 2017

졸업 조건 만족을 위한 졸업 작품 제작과 제작된 작품의 공학 논문 체계로 서술해야 하는 졸업 논문 제출 규정에 따라 전공단위에서 이루어진 절차의 개요를 제시하고, 개선에 필요한 사항을 제안한다. 설계 내용은 재난 지역의 인원이나 물체를 탐지하기 위한 소형 무인기 구성에 관한 것이다. 적외선 센서와 GPS를 소형 무인기인 드론에 탑재하고, 블루투스 통신을 이용하여 드론을 조종한다. 조종되는 드론이 구조 대상물을 탐지하고, 드론에 탑재된 GPS를 이용하여 실시간으로 탐지한 대상물의 위치를 수신하는 대상물 탐지용 드론을 설계하고 제작한다. 실험결과로 3~4 m 범위의 구조 대상물 탐지가 가능했고, 위치값을 실시간으로 전송하는 것을 확인했으며, RF 통신을 이용하여 통신 거리를 증가시킬 계획이다.

• 한국전자통신학회논문지
• /
• 제12권6호
• /
• pp.1159-1166
• /
• 2017

가속도 및 자이로 센서, 아두이노 프로 미니와 블루투스 모듈을 이용하여 사물인터넷 기반의 소 행동 특성을 관찰할 수 있는 시스템을 설계하고 구현하였다. 구현된 시스템을 통해 소의 움직임을 관찰하고 측정하였으며, 측정된 데이터를 블루투스 모듈을 통해 스마트폰으로 전송하여 스마트 폰에서 소의 움직임 변화를 그래프를 통해 나타내었으며 이를 통해 소의 걸음 수를 측정하도록 하였다. 구현된 시스템과 제안한 알고리듬에 의해 소의 발정 상태를 판단하며, 이는 소의 인공수정에 의한 번식력 향상에 도움을 줄 수 있다. 본 논문에서 구현된 시스템을 실제 소의 다리에 부착하여 데이터를 측정하고, 제안한 알고리듬에 의해 발정 유무를 판단하였다. 향후 연구 과제로 피 측정되는 소의 개체수와 통신 거리를 늘려 축산 농가에서 좀 더 효율적으로 사용할 수 있는 시스템 연구 및 측정 데이터의 데이터베이스화를 하고자 한다.