• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.65-73
• /
• 2008

The characterization process for the accurate color reproduction in mobile phone with camera and LCD is popular. The camera and LCD characterization, gamut mapping process is necessary to map the camera's input color stimulus, CIEXYZ value, into the LCD's output color stimulus. Each characterization is the process estimating the relation between input and output signals. In case of LCD, because of output device, the output color stimulus for the arbitrary input signal can be measured by spectro-radiometer However, in the camera, as the input device, the characterization is an inaccurate and needs the manual works in the process obtaining the output signal because the input signal can not be generated. Moreover, after gamut mapping process, the noise is increased because the optimized gamma tone curve of camera for the noise is distorted by the characterization. Thus, this paper proposed the system of obtaining the output signal of camera and the method of gamma correction for the noise. The camera's output signal is obtained by RGB values of patches from captured the color chart image. However, besides the illumination, the error for the location of the chart in the viewfinder is generated when many camera modules are captured the chart. The method of correcting the position to correct the error from manual works. The position of camera is estimated by captured image. This process and moving of camera is accomplished repeatedly, and the optimized position can be obtained. Moreover, the lightness curve of camera output is corrected partly to reduce the noise from the characterization process.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.32-38
• /
• 2012

Each sensor node can know its location in several ways, if the node process the information based on its geographical position in sensor networks. In the localization scheme using GPS, there could be nodes that don't know their locations because the scheme requires line of sight to radio wave. Moreover, this scheme is high costly and consumes a lot of power. The localization scheme without GPS uses a sophisticated mathematical algorithm estimating location of sensor nodes that may be inaccurate. AHLoS(Ad Hoc Localization System) is a hybrid scheme using both GPS and location estimation algorithm. In AHLoS, the GPS node, which can receive its location from GPS, broadcasts its location to adjacent normal nodes which are not GPS devices. Normal nodes can estimate their location by using iterative triangulation algorithms if they receive at least three beacons which contain the position informations of neighbor nodes. But, there are some cases that a normal node receives less than two beacons by geographical conditions, network density, movements of nodes in sensor networks. We propose an indirect localization scheme for low-density sensor nodes which are difficult to receive directly at least three beacons from GPS nodes in wireless network.

• The Korean Journal of Malacology
• /
• v.28 no.2
• /
• pp.91-99
• /
• 2012

Corbicula japonica, belonging to Other Veneroida Family Corbiculidae, was distributed in the freshwater and brackish rivers, where was a sandy and shallow depth. Catch of C. japonica in the Seomjin River occupied at a large portion of the catch in Kyungnam Province, which was about 30% of total catch in Korea. C. japonica has little studied on biomass, scientific resources assessment and management, because of inaccurate catch report data in the Seojin River. In this study, we conducted scientific and systematic approaches under data limited situation with application of the potential fishery yield system for sustainable fisheries resources management. Estimation system of the potential fishery yield was consisted of 5 tier system. We have used to tier 1 and 2 which were demanded higher level of information than the other tiers. The potential fishery yields were estimated 77.66ton for tier 1 using commercial fishery-dependent data, and 129.82ton for tier 2 with fishery-independent survey data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.87-90
• /
• 2015

Equipments that can transmit maritime distress signals in accordance to Global Maritime Distress Safety System are the followings: A1 water(Very High Frequency, SART), A2 water(MF/HF Radio Equipment), A3 water(INMARSAT), A4 water(Emergency Position Indicating Radio Beacon). Institutions with the capacity to receive distress signals are Korea Coast Guard affiliated radio stations, patrol ships, Rescue Coordination centers, Vessel Traffic centers, Complex problems regarding repetitive distress alarms, inaccurate statistics, multiple control towers are existent. Consequently, effective measurement to resolve dispersed operating maritime distress signal system are in time of need. Moreover, current KCG Headquarter is considering to integrate five distress radio stations dispersed across nation into a single international safety communication center. The integration of radio stations are efficient in terms of information coordination between nations, however, it cannot support efficient response to real-time maritime incident. Therefore, in this study, a new system that can rapidly response to real-time maritime incident will be proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.781-790
• /
• 2013

This research focuses on development of the conceptual cost estimation models for I.L.M box girder bridge. The current conceptual cost estimation for public construction projects is dependent on governmental average unit price references which has been regarded as inaccurate and unreliable by many experts. Therefore, there have been strong demands for developing a better way of conceptual cost estimating methods. This research has proposed three different conceptual cost estimating method for a P.S.C. girder bridge built with the I.L.M method. Model (I) attempts to seek the proper breakdown of standard works that are accountable for more than 95 percentage in total cost and calculates the amount of standard work's materials from the standard section and volume of I.L.M box girder bridge. Model (II) utilizes a correlation analysis (coefficient over 0.6 or more) between breakdown of standard works and input data that would be considered available information in preliminary design phase. Model(III) obtains conceptual estimating through multiple-regression analysis between the breakdown of standard works and all of input data related to them. In order to validate the clustering of coverage in the preliminary design phase, the variation of I.L.M cost coverage from multiple-regression analysis[model(III)] has been investigated which result in between -3.76% and 11.79%, comparing with AACE(Association for the Advancement of Cost Engineering) which informs its variation between -5% and +15% in the design phase. The model proposed from this research are envisioned to be improved to a great distinct if reliable cost date for P.S.C. girder bridges can be continually collected with reasonable accuracies.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.49-59
• /
• 2005

This paper proposed a six-color separation using additional colorants and quantitative granularity metric to reduce color difference and graininess. In the conventional method, light magenta and light cyan are used in the bright region instead of magenta and cyan. However, the hue value of liBht magenta and light cyan is different from the one of magenta and cyan in CIELAB space, so that this makes the colorimetric reproduction more or less inaccurate. To improve this inaccuracy, the proposed method uses yellow and light magenta colorants as the additional colorants. In the bright region, magenta is replaced with light magenta and yellow, while cyan is replaced with light cyan and light magenta. This selection reduces hue difference because it creates the color of similar hue to magenta and cyan. In addition, smooth image can be simultaneously obtained by the less dot visibility of additional colorants. In the middle region, magenta is replaced with light magenta and magenta, while cyan is replaced with light cyan and cyan. The use of two colorants having a different concentration makes the dot Pattern coarse. To reflect this Phenomenon, quantitative granularity metric is used. In the dark region, only magenta and cyan colorant is used as usual. Through experiments, it is shown that the proposed method improves both colorimetric and smooth tone reproductions.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.124-135
• /
• 2015

As many countries have been raising awareness of environmental issues, greater efforts for eco-friendly construction have been made in both governmental and private sectors. However, assessment circumstances for building energy performance and green building standard of legislation are still based on two dimension and handwork. This takes time, cost and labor, and makes assessment inaccurate and inefficient. Therefore, this study suggests methods to improve eco-friendly construction permission process and to automatize open BIM-based assessment of Energy Performance Index (EPI) among several eco-friendly construction certification standards. First, it analyzes the relations between assessment criteria and IFC data, and provides solutions to problems and limitations. Second, it applies the solutions to assessment program in order to automatize open BIM-based assessment for EPI. The eco-friendly construction permission process with these solutions applied will reduce time, cost, and labor by simplifying and automatizing the tasks. Also, the simplified process of design revision will improve not only productivity and efficiency but also accuracy and reliability.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.287-302
• /
• 2005

Digital Elevation Models (DEMs) were generated by ERS-l/2 and JERS-1 SAR interferometry in Daejon area, Korea. The quality of the DEM's was evaluated by the Ground Control Points (GCPs) in city area where GCPs were determined by GPS surveys, while in the mountain area with no GCPs, a 1:25,000 digital map was used. In order to minimize errors due to the inaccurate satellite orbit information and the phase unwrapping procedure, a Differential InSAR (DInSAR) was implemented in addition to the traditional InSAR analysis for DEM generation. In addition, DEMs from GTOPO30, SRTM-3, and 1:25,000 digital map were used for assessment the resolution of the DEM generated from DInSAR. 5-6 meters of elevation errors were found in the flat area regardless of the usage and the resolution of DEM, as a result of InSAR analyzing with a pair of ERS tandem and 6 pairs of JERS-1 interferograms. In the mountain area, however, DInSAR with DEMs from SRTM-3 and the digital map was found to be very effective to reduce errors due to phase unwrapping procedure. Also errors due to low signal-to-noise ratio of radar images and atmospheric effect were attenuated in the DEMs generated from the stacking of 6 pairs of JERS-1. SAR interferometry with multiple pairs of SAR interferogram with low resolution DEM can be effectively used to enhance the resolution of DEM in terms of data processing time and cost.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.329-337
• /
• 2019

It is true that many tales delivered in an 'Story-telling' auditorium or theater have not so much exquisite and refined forms as distorted and deteriorated ones. Furthermore, when false interpretations of tale-performers added into the category of the texts of tales, the problems can be made worse. In case of oral folk tales, there can be discordance between the standpoint of a tale-performer and the contents of a tale. This thesis is directly aimed at pointing out the 'Behavior Economics' problems concerned with the reading and interpretation of tales through investigating the missing parts of a text in reading tales. Man's rationality is meant to be confined to bounded rationality. Instead of making best choices, bounded rationality leads consumers to make a decision which they think suffices themselves to the point requiring no more consideration on the given item. It is the very Heuristic that does work in the process of this simplified decision making process. Heuristic utilizes established empirical notion and specific information, and that's why there can be cognitive 'Biases' sometimes leading to inaccurate judgment. As Oral Literature is basically based on heavy guesswork and perceptual biases of general public, it is imperative to contemplate oral literature in the framework of Heuristic of behavior economics. This thesis deals with thinking types and behavioral patterns of the general public in the perspective of heuristic by examining 'Story-tellings' on the basis of personal or public memory. In addition, heuristic involves how to deal with significant but intangible content such as the errors of oral story teller, the deviations of the story, and responses of the audience.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.591-598
• /
• 2021

The digital phase-locked loops(DPLL) is a circuit used for phase synchronization and has been generally used in various fields such as communication and circuit fields. State estimators are used to design digital phase-locked loops, and infinite impulse response state estimators such as the well-known Kalman filter have been used. In general, the performance of the infinite impulse response state estimator-based digital phase-locked loop is excellent, but a sudden performance degradation may occur in unexpected situations such as inaccuracy of initial value, model error, and disturbance. In this paper, we propose a minimum variance finite impulse response filter with optimal horizon for designing a new digital phase-locked loop. A numerical method is introduced to obtain the measured value interval length, which is an important parameter of the proposed finite impulse response filter, and to obtain a gain, the covariance matrix of the error is set as a cost function, and a linear matrix inequality is used to minimize it. In order to verify the superiority and robustness of the proposed digital phase-locked loop, a simulation was performed for comparison and analysis with the existing method in a situation where noise information was inaccurate.