• Journal of the Korea Computer Industry Society
• /
• v.6 no.2
• /
• pp.357-364
• /
• 2005

The prefabricated type used generally in Korea to join cable runs on new installations or to repair broken Cable runs on existing installations, because installation is very simple and save time. This type is a permanent, shielded and submersible cable joint for direct burial or vault application. It confirms to the requirements of IEEE std. 404-1993 by factory testing, but many problems of insulated cable systems are caused by internal defects of the joint part which have to be mounted ensile. Faults arise from impurities or voids. A suitable solution for a monitoring of cable joints during the after-laying test and service is partial discharge detection. Specimen obtained 1mm thickness from the insulation of real power cable and cable joint. <중략>The partial discharges are measured to determine their time dependence for 60 minutes and the influence of applied electrical stress under 30kV. $\Phi-q-n$ properties were measured using detection impedance, high pass filter and computerized data acquisition system. Statistic Value like maximum charge, repetition rate, average charge, etc. are calculated. It is possible to quantitative analysis of $\Phi-q-n$ properties from this statistic value and pattern analysis.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.2
• /
• pp.279-286
• /
• 2005

The prefabricated type used generally in Korea to join cable runs on new installations or to repair broken Cable runs on existing installations, because installation is very simple and save time. This type is a permanent, shielded and submersible cable joint for direct burial or vault application. It confirms to the requirements of IEEE std. 404-1993 by factory testing, but many problems of insulated cable systems are caused by internal defects of the joint part which have to be mounted ensile. Faults arise from impurities or voids. A suitable solution for a monitoring of cable joints during the after-laying test and service is partial discharge detection. <중략> $\Phi-q-n$ properties were measured using detection impedance, high pass filter and computerized data acquisition system. Statistic Value like maximum charge, repetition rate, average charge, etc. are calculated. It is possible to quantitative analysis of $\Phi-q-n$ properties from this statistic value and pattern analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.297-309
• /
• 2007

We introduce two distributed IP address auto-configuration mechanisms for mobile ad hoc networks. RADA (Random ADdress Allocation) is based on random IP address selection, while LiA (Linear Address Allocation) assigns new addresses sequentially, using the current maximum IP address. An improved version of LiA, hewn as LiACR (Linear Address Allocation with Collision Resolution) further reduces the control overhead. Simulation results show that, when many nodes join a network during a short period, RADA assigns addresses more quickly than LiA and LiACR. However, RADA uses the address space less efficiently, due to its random allocation of IP addresses. Hence, RADA is particularly useful in battlefield scenarios or rescue operations where fast setup is needed, while LiA and LiACR are more suitable for ad hoc networks that are moderate, confined and subject to some form of governance control, such as that orchestrated by a wireless service provider.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.60-67
• /
• 2001

Multicast Protocol for multimedia service on the Internet can be classified into two types, e.g., source based tree and shared tree according to difference of tree construction method. Shared tree based multicast is known to show outstanding results in the aspect of scalability than source based tree. Generally, There have been lots of researches on the method to satisfy QoS constraints through proper Rendezvous Point (RP) in the shared tree. In addition, as the multicast group members join and leave dynamically in the service time, RP of the shared tree should b be reselected for guranteeing Qos to new member, But, RP reselection method has not been considered generally as the solution to satisfy QoS C constraints. In this paper, new initial RP selection and RP reselection method are proposed, which utilize RTCP (Real Time Control Protocol) report packet fields. Proposed initial RP selection and RP reselection method use RTCP protocol which underlying multimedia application service So, the proposed method does not need any special process for collecting network information to calculate RP. New initial RP selection method s shows better performance than random and topology based one by 40-50% in simulation. Also, RP reselection method improves delay p performance by 50% after initial RP selection according to the member’s dynamicity.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.107-114
• /
• 2002

In these days, rapid advances of the computer system and the high speed network have made the multimedia services popularized among various applications and services in the internet. Internet live broadcasting, a part of multimedia services, makes it possible to provide not only existing broadcasting services including audio and video but also interactive communications which also expand application scopes by freeing from both temporal and spatial limitation. In the Paper, an interned Personal-live broadcasting server system is developed by allowing individual users to actively create or join live-broadcasting services with such basic multimedia devices as a PC camera and a sound card. As the number of broadcasters and participants increases, concurrent multiple channels are established and groups are to be expanded. The system should also guarantee High Availability (HA) for continuous services even in the presence of partial failure of the cluster. Furthermore, a transmission mode switching is supported to consider network environments in the user system.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.11-19
• /
• 2010

ZigBee is a standard for wireless personal area networks(WPANs) based on the IEEE 802.15.4 standard. It has been developed for low cost and low power consumption. There are two alternative routing schemes that have been proposed for the ZigBee standard: Ad-hoc On-Demand Distance Vector(AODV) and tree routing. The tree routing forwards packets from sensors to a sink node based on the parent-child relationships established by the IEEE 802.15.4 MAC topology formation procedure. In order to join the network, a sensor node chooses an existing node with the strongest RSSI(Received signal strength indicator) signal as a parent node. Therefore, some nodes carry a large amount of traffic load and exhaust their energy rapidly. To overcome this problem, we introduce a new metric based on link quality and traffic load for load balancing. Instead of the strength of RSSI, the proposed scheme uses the new metric to choose a parent node during the topology formation procedure. Extensive simulation results using TOSSIM(TinyOS mote SIMulator) show that the CFR scheme outperforms well in comparison to the conventional tree routing scheme.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.4
• /
• pp.123-132
• /
• 1999

A video conferencing system provides sharing the conference environment for geographically dispersed computer users who use the audio and video information. But the conventional video conferencing systems have some problems which are dependent on specific software and/or hardware and bound the certain platform and network environment. Furthermore the participants must know the information about other participants before joining the conference session and they have to use the same video conferencing system. This paper describes design and implementation of the video conferencing system on the WWW to solve the mentioned problems. The conference applications are transmitted from a WWW server and executed in the participants Web browsers. The participant can carry out conference services by using only the web browser. The WWW server takes charge of conferencing management including the information related to the participants and provides supported conference tools such as whiteboard, chatting and multimedia controls. Therefore the participants can easily join the conference sessions and perform conference working regardless of network connection situations. We used the Java to implement the seamless session connections and interaction between the conference participants which are the most important when implementing the video conferencing system on the WWW and used the ActiveX technology about the audio and video controls to make it easy the hardware control.

• The Journal of Art Theory & Practice
• /
• no.15
• /
• pp.7-30
• /
• 2013

This is a study on the ecological view of Robert Smithson's reclamation projects. Smithson was a pioneer of Earth art in the late 1960's. Robert Smithson believed that he could transform industrial wastelands, such as an abandoned oil rig and a no longer used quarry, into "Earth Art." In the early seventies, he conceived of land reclamation as a new art form and called this art "Reclamation Projects." His attention regarding industrial ruin started from the American political and social situations in the 1960's. In the late 1960's, American society was in chaos from the right of movement of African Americans, the women's rights movement and from the strike for renunciation of the Vietnam War. The intellectual class seemed to believe that it was the destiny of a closed system's society to run in the direction of entropy. Smithson, who was skeptical about the system of American society, also thought that entropy was the proper diagnosis to describe America's situation in the 1960's. The 1960's civic movements like the civil rights movement and antiwar movements expanded into the environmental movements based on ecological views of the 1970's. The government had also started to worry about environmental pollution. Thus, the reclamation act was also established in 1972. Smithson believed that the relation between art and social background are closely related and affect each other. He was concerned with how art can join society, and the result was reclamation projects. Such reclamation projects lie on man-made wastelands, like abandoned oil rigs and no longer used quarries, which was an allegory of entropy. He also thought that Frederick Law Olmsted was a pioneer of earth art. The aesthetic category of Olmsted's view of landscape is to be based on the picturesque of Uvedale Price and William Gilpin. So Smithson, who considered Olmsted as his touchstone, also accepted the picturesque. Such reclamation projects aim to change with nature by adapting the creative power of artists to the ruin which has the highest level of entropy in industrial society. Smithson wanted this to become the bridge between man and nature. His reclamation project's aim, which shows the system interacting between man and nature as a network, is not different from the ecological view of the 1970's environmental movement.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.88-96
• /
• 2011

Underwater acoustic communication is applicable in various areas, such as ocean data collection, undersea exploration and development, tactical surveillance, etc. Thus, robot control system construction used for underwater-robot like AUV or ROV is essential in these areas. In this paper, we propose the Message Merging MAC($M^2$-MAC) protocol, which is suitable for real time robot control system, considering energy efficiency in important parts of underwater acoustic sensor network constitution. In this proposed MAC protocol, gateway node receives the data from robot nodes according to the time slots that were allotted previously. And messages delivered from base-station are generated to one MAC frame by buffering process. Finally, generated MAC frames are broadcasted to all robot nodes in the cluster. Our suggested MAC protocol can also be hybrid MAC protocol, which is successful blend of contention based and contention-free based protocol through relevant procedure with Maintenance&Sleep (M&S) period, when new nodes join and leave as an orphan. We propose mathematical analysis model concerned about End-to-End delay and energy consumption, which is important factor in constructing real-time robot control system. We also verify the excellence of performance according to comparison of existing MAC protocols with our scheme.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.100-108
• /
• 2003

By choosing Multicast for transmission of educational contents in the Remote Educational System, we can reduce the server load and increase network bandwidth utilization. We design and implement Multicast Middleware for the Remote Educational System in this paper. There are three characteristics in this Multicast Middleware: 1) Through Centralized Multicast Group Management for passive members, it allows a host to make multicast group, which is composed of receivers, called Group Member and who are chosen by the host, called group Maker. Because, all groups are created by the Group Maker in Centralized Group Management, Group Member's join action will be passive 2) Maintenance and recovery of multicast group information in order to restore from exception and crash; the maintenance and recovery mechanism of Group Maker is distinct from that of Group Member. 3) The mechanism which enables to transmit large size multimedia data through multicasting and remove additional copy operation through shared buffer. Fragmentation/de-fragmentation for large data delivery results in additional copy operation in user level. But by using user level shared buffer, it can be done without user Bevel copy operation. By applying to Remote Educational environment which consists of 30 PCs and Fast Ethernet, we can examine the efficiency of this middleware, which can transmit 18frames/sec movie which resolution 320 $\times$ 120 pixels, 128Kbps encoded sound data and some text data.