• 한국ITS학회 논문지
• /
• 제4권1호
• /
• pp.107-115
• /
• 2005

For effective IP based service implementation on the wireless network environments, wireless network including the ITS network have to support QoS guaranteed protocol such as a RSVP. RSVP is a resource reservation protocol for Internet environment, and its scalability makes easy to implement RSVP over the various IP transport technologies. But for the If based ITS wireless network environment, RSVP is not suitable, since by its path setup procedure characteristic. In the wireless access network for ITS service, when a mobile node moves to other domain it must perform registration procedure. But the registration procedure is time consuming steps, so if a RSVP session was already established in the previous domain, the RSYP session may be disconnected and the time to re establish a new RSVP session is long enough to cause serious packet loss. In this paper, we propose a pre-path reservation mechanism for applying the RSVP in wireless access networks for ITS. In the pre-path reservation mechanism, the resource reservation procedure occurred during a mobile node's handoff time. An access point in wireless access network performs this procedure when the mobile node attempts handoff The access point executes pre-path reservation procedure as a proxy, since the mobile node does not have IP address until the address allocation procedure is finished in a new domain.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.175-178
• /
• 1996

The purpose of this thesis is the propose of various signal processing algorithm for the ECG(electrocardiogram) and the design of realtime automated ECG analyzer feasible with these algorithms. The algorithms are composed of (1)filtering procedure fer the estimation and removal of baseline drift, 60Hz power line interference, and muscle artifacts (2)detection procedure of QRS complex and P wave (3)typification procedure for the pattern classification according to the morphologies (4) selection of representative beat, significant point and wave boundary decision procedure and (5) parameter extraction and diagnosis procedure. All verifications are carried out between the algorithms proposed in this paper and other algorithms already proposed by many researchers, for the objective comparison in each procedure. The efficiency of proposed algorithms are demonstrated with the aid of internationally validated CSE database and the performances of filtering procedure are compared on artificial noise signal as well as actual ECG signals with appropriate noise components. for the comparison on the performance of designed automated ECG analyzer, the diagnosis results were compared with ECG analyzer manufactered by Fukuda denshi in Japan.

• 터널과지하공간
• /
• 제15권3호
• /
• pp.228-235
• /
• 2005

Hoek-Brown의 파괴기준식으로부터 암반의 내부마찰각 및 점착강도를 계산한 후, Mohr-Coulomb의 항복함수를 이용하여 소성 보정이 적용될 수 있는 것으로 알려져 있다. 하지만 본 연구에서는 이러한 계산 과정이 연약 암반이나 낮은 봉압 조건의 암반에 대해서는 적합하지 않다는 사실을 보여주고자 한다. 즉, Hoek-Broun 재료 모델로부터 직접 및 간접적 적용에 의해 소성 보정을 수행하는 과정을 제시하였으며, 이를 통해 직접적 적용이 간접적 적용에 비해, 비선형 파괴면을 더욱 효과적으로 모사할 수 있고, 특히 봉압이 낮은 응력 조건에서 효과적임을 보여주고자 한다.

• 대한환경공학회지
• /
• 제33권8호
• /
• pp.617-622
• /
• 2011

수질오염총량관리제는 유역에 설정된 목표수질을 달성하기 위해 허용부하량 이내로 오염물질의 배출량을 관리하기 위해 도입되었다. 그 동안 수질오염총량관리제를 시행해오면서 수많은 시행착오와 문제점들이 발생하여 이를 개선하기 위한 제도적, 기술적 보완이 이루어져 왔으나, 제도의 효율적인 시행을 위해 근본적인 개선이 필요한 실정이다. 따라서 본 연구에서는 수질오염총량관리제의 합리적 시행을 위한 개선방안을 새로운 시각에서 제시하고자 한다. 수질오염총량관리제의 시행에 있어 무엇보다도 먼저 지류하천의 수질 유량모니터링을 위한 대상하천의 규모, 측정시기, 항목 및 주기 등을 포함하는 시스템 구축을 통하여 모니터링을 수행하여야 한다. 모니터링 결과를 바탕으로 해당유역의 이수 및 생태목적에 맞도록 대상물질 및 목표수질을 설정하고, 전체유역을 대상으로 기본계획을 수립하여야 한다. 목표수질을 초과하는 유역만을 대상으로 수질 개선을 위한 시행계획을 수립하고, 시행계획에 따른 해당유역의 목표수질 만족여부를 주요내용으로 하는 이행평가를 매년 수행해야 한다. 최종적으로 해당유역에 설정된 목표수질을 만족하지 못하거나, 대상항목 또는 목표수질이 변경되면 동일한 순으로 절차를 반복하게 되고, 해당유역에 설정된 목표수질을 만족하면 해당유역의 수질오염총량관리제를 종료하면 된다.

• 한국경영과학회지
• /
• 제14권1호
• /
• pp.16-26
• /
• 1989

The terminal layout problem is fundamental in may centralized computer networks, which is generated formulated as the capaciated minimum spanning tree problem (CMSTP). We present an implementation of the dual-based procedure to solve the CMSTP. Dual ascent procedure generates a good feasible solutions to the dual of the linear programming relaxation of CMSTP. A feasible primal solution to CMSTP can then be constructed based on this dual solution. This procedure can be used either as a stand-alone heuristic or, else, it can be incorporated into a branch and bound algorithm. A numerical result is given with quite favorable results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.334-337
• /
• 2006

Generally, fragility curve has been used in predicting failure of structures due to seismic actions. In this research, the method of drawing fragility curve has been applied to evaluating success/failure of structures and satisfactory/unsatisfactory of concrete mixture performance based on material parameters. In the paper, a detailed explanation of the procedure of drawing fragility curve based on material parameter has been introduced. Fragility curve generating procedure includes generation of virtual data points from limited number of actual data points by bell curve implementation, determination of success/failure status of each data point by assigned criterion, and completion of final fragility curve. For practical applications, workability of concrete mixture content based on "unit water" has been used to obtain fragility curve. Detailed explanation of fragility curve drawing procedure for material parameters is presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.25-28
• /
• 1987

Design procedure of adaptive controller with variable load condition is present and applied to velocity control of small, permanent magnet DC servo motor. The state feedback control scheme is adopted and Recursive Least Squares algorithm is used for parameter estimation. In order to reduce the time consuming. In the procedure of adaptation-gain tuning of state feedback controller, approximate curve fitting technique is applied to the relations between load condition and poles of the system, load condition and feedback gains. With this method, fast adaptation can be accomplished. It is shown that this procedure can be applied not only to variable load condition but also to variation of other system constants, for example variation of resistance and inductance etc.. Simulation results is present for both cases - variable inertia load, variable motor resistance to verify performance improvements. This design procedure produces an adaptive con troller which is feasible for implementation with microprocessor by reducing calculation time.

• Structural Engineering and Mechanics
• /
• 제30권4호
• /
• pp.481-500
• /
• 2008

In this paper, a model updating technique in dynamics is used to identify elastic properties for pultruded GFRP-Glass Fiber Reinforced Plastic framed structural systems used in civil construction. Traditional identification techniques for composite materials may be expensive, while this alternative approach allows to identify several properties simultaneously, with very good precision. Furthermore, the procedure of a non-destructive type has a relatively simple implementation. Properties describing the mechanical behavior for beam and shell finite element modeling are identified. The used formulation is based on the minimization of eigensolution residuals. Important points concerning model updating procedures have been observed, such as the particular vibrational behavior of the test structure, the modeling strategies and the optimal placement of the sensors in the experimental procedure. Results obtained by experimental tests show the efficiency of the proposed procedure.

• Journal of the Korean Statistical Society
• /
• 제20권2호
• /
• pp.108-117
• /
• 1991

A parametric empirical Bayes procedure is proposed and studied to compare treatments simultaneously with the best. Minimum Bayes risk lower bounds are derived for an additive loss function, and their relationship with Bayesian simultaneous confidence lower bounds is given. For the proposed empirical Bayes procedure, the nominal confidence level both in Bayesian sense and in frequentist's sense is shown to be controlled asymptotically. For practical implementation, a measure of significance similar to f-value is suggested with an illustrative example.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.65-68
• /
• 2000

In this paper, design parameters are investigated and design procedure is established for PCS mobile station, especially for receiver RF block. And simulation environment to analyze parameters of the receiver RF block to determine whether it satisfies the receiver standard, IS-98C, is calculated. Design parameters are simulated and optimized. With simulated results, PCS mobile station is implemented and tested. Measured results show good agreement with simulation Design procedure can be used to get optimum characteristics for each of receiver block. By using optimum characteristics, mobile station can be designed more efficiently.