• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.2
• /
• pp.105-113
• /
• 2019

A two-year study was conducted from 2017 to 2018 by the establishment of a test field at Chungju-si and Cheongyang-gun. Plant height, number of leaves, insects and diseases, and fresh and dry matter yields for corn hybrid('Kwangpyeongok') were investigated. Daily average, maximum, and minimum temperature, monthly average temperature, daily precipitation, and sunshine duration during the growing season were investigated. We selected climate-critical factors to corn productivity and conducted an evaluation of vulnerability to climate change from 1999 to 2018 for both regions. In 2018, the dry matter yield of forage corn was 6,475 and 7,511 kg/ha in Chungju and Cheongyang, respectively, which was half of that in 2017. The high temperature and drought phenomenon in the 2018 summer caused the corn yield to be low. As well as temperature, precipitation is an important climatic factor in corn production. As a result of climate impact vulnerability assessment, the vulnerability has increased recently compared to the past. It is anticipated that if the high temperature phenomenon and drought caused by climate change continues, a damage in corn production will occur.

• International Area Studies Review
• /
• v.21 no.4
• /
• pp.41-63
• /
• 2017

FDI can either be absorbed in the production cycle with domestic investment and create an inducement effect or it can remain as an exogenous factor and increase the volatility of GDP. The purpose of this paper is to research these different impacts that FDI could have. For that, the endogenous growth theory was employed. The statistic method used are the panel model for sectoral analysis, and GARCH model and VAR for time series analysis. Myanmar was selected as this paper's research subject because it is one of countries which had a colossal amount of FDI inflow recently. The panel analysis did not confirm the causality between sectoral FDI and sectoral GDP. The reason for this could be in the lack of data, since sectoral data exists yearly only during 2006-2016. Therefore this study conducted the times series analysis. According to the results, during 2006 until 2010, it showed signs of GARCH but the effect of FDI on GDP was nonexistent, which means FDI was not integrated into the domestic production cycle but stayed in residual terms. During 2011 to 2016, FDI seemed to affect the growth of Myanmar's GDP. The estimation confirmed the existence of GARCH and the Granzer causality test confirmed that FDI influenced the GARCH, which signified FDI increased the volatility of GDP. The VAR analysis showed responses of GDP to FDI was small(about 0.0007). This research assumes that FDI can be divided in two parts: one part which can be assimilated in the domestic production cycle and the other where it stays outside of the production cycle. The former creates production inducement effect and the latter only increases the volatility of GDP. According to this study, the latter outweighs the former impact in Myanmar.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.2
• /
• pp.85-96
• /
• 2019

Solar radiation is an important variable for estimation of energy balance and water cycle in natural and agricultural ecosystems. A deep neural network (DNN) model has been developed in order to estimate the daily global solar radiation. Temperature and precipitation, which would have wider availability from weather stations than other variables such as sunshine duration, were used as inputs to the DNN model. Five-fold cross-validation was applied to train and test the DNN models. Meteorological data at 15 weather stations were collected for a long term period, e.g., > 30 years in Korea. The DNN model obtained from the cross-validation had relatively small value of RMSE ($3.75MJ\;m^{-2}\;d^{-1}$) for estimates of the daily solar radiation at the weather station in Suwon. The DNN model explained about 68% of variation in observed solar radiation at the Suwon weather station. It was found that the measurements of solar radiation in 1985 and 1998 were considerably low for a small period of time compared with sunshine duration. This suggested that assessment of the quality for the observation data for solar radiation would be needed in further studies. When data for those years were excluded from the data analysis, the DNN model had slightly greater degree of agreement statistics. For example, the values of $R^2$ and RMSE were 0.72 and $3.55MJ\;m^{-2}\;d^{-1}$, respectively. Our results indicate that a DNN would be useful for the development a solar radiation estimation model using temperature and precipitation, which are usually available for downscaled scenario data for future climate conditions. Thus, such a DNN model would be useful for the impact assessment of climate change on crop production where solar radiation is used as a required input variable to a crop model.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.3
• /
• pp.85-105
• /
• 2021

The purpose of this study is to develop and implement cooperative consumption education programs using design thinking in middle school home economics education classes to understand the impact on students' cooperative problem solving competency. Accordingly, a cooperative consumption education program based on design thinking was developed according to the ADDIE model, and the evaluation was conducted on a total of 25 students. The results of the study were as follows. First, based on prior research, we developed a consumption education program based on D. school's design thinking process under the theme of 'Creating a Shared School' for the practice of cooperative consumption. As a result of expert validity verification of the teaching/learning course plan and workbook for the eight sessions, the average question was 4.72 (out of 5 points) and the average CVI was 0.93, indicating that the content validity and field suitability were excellent. Second, to summarize the results achieved from the implementation of the cooperative consumption education program, the pre-/post-test using the revised and supplemented cooperative problem-solving competency tool, and the open-ended survey, It was confirmed that the developed program had a significant effect on improving not only the students' knowledge and perceived necessity for cooperative consumption along with the awareness of practice, but also the cooperative problem-solving competency. As a follow-up study, we propose to expand the research to a wider audience, and to further conduct research and develop programs applied with design thinking in home economics curriculum and in consumer competency development. This study confirmed that cooperative consumption education programs using design thinking are effective in improving youth's cooperative problem-solving competency and is meaningful in that they developed consumption education programs under the theme of 'cooperative consumption' in response to changing consumer education needs.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.97-111
• /
• 2021

Purpose: It is expected that various infrastructures diagnosis equipment will be needed as infrastructures management is strengthened to implement the Framework Act on Sustainable Infrastructure Management. It is necessary for a certification system to supply certified products of a reasonable level in accordance with market requirements for various convergence equipment. This paper deals with the introduction of certification system of inspection and diagnosis equipment for infrastructure using advanced technologies. Method: The basic elements, systems and procedures of certification system were reviewed through analyzing and comparing the existing similar certification system in Korea. In addition, a survey was conducted on a catalog method and the minimum performance criterion (sampling survey and complete enumeration survey) to equipment developers (manufacturers), clients and equipment users. Result: This survey showed that clients preferred complete enumeration method on the basis of minimum performance, and equipment users also preferred complete enumeration survey and sample survey, for minimum performance, at a similar rate. On the other hand, equipment developers preferred the catalog method. Conclusion: Clients and users who are the users of the diagnostic equipment preferred the minimum performance criterion because their trust in quality is important. On the other hand, developers(manufacturers) preferred the catalog method which adopts self certification because it is regulated in developing various products. There is no specific plan for the minimum performance standards required for the introduction of the method which users demand, at present. In addition, it is not desirable to force to introduce a certification system because it requires a considerable period of study to prepare the specific standards. Therefore, it is appropriate to operate the system for a certain period of time centering around the catalog method for the stable and continuous development of the infrastructure diagnosis and test equipment market in Korea. Also, it is effective to expand and develop the certification system to the extent that it minimizes the impact on the market when specific plans for the standards are prepared in the future.

• Korea Journal of Hospital Management
• /
• v.27 no.2
• /
• pp.53-66
• /
• 2022

Aim : The purpose of this study is to investigate the influence of the awareness level of the mandatory employment system for the disabled and the help of the employment increase on the health status of the disabled. Based on this, the purpose of this study is to raise awareness of the compulsory employment system for the disabled and to suggest a way to improve the health of the disabled. Methods : In this study, the first data of the second wave of the 2016-2018 Employment Panel Survey for the Disabled was used to analyze the participation of the disabled in economic activities. a total of 1,648 subjects were analyzed using the chi-square test and generalized estimating equation (GEE). Results : Compared to the group knowing about the compulsory employment system for the disabled, in the group who did not know about the compulsory employment system, the cognitive level was significantly higher for subjective health status (Odds Ratio [OR]: 1.573, 95% Confidence Interval [CI]: 1.252-1.977) and chronic diseases (OR: 1.407, 95% CI: 1.091-1.816), Compared to the group that the compulsory employment system for the disabled is helpful in increasing employment, the group that said it was not helpful at all had depression feel (OR: 2.330, 95% CI: 1.219-4.452) and subjective health status (OR: 2.052, 95% CI: 1.232. -3.416) significantly affected. Conclusion : It was found that the lower the level of awareness and help of the compulsory employment system for the disabled, the negative impact on their health status. Therefore, it is necessary to promote employment growth by raising awareness of the employment system for the disabled. Furthermore, in order to improve the health of the disabled, public relations plans to increase the understanding of the disabled on the system and policies to protect the disabled people who lose their will to work due to difficulties in accessing employment were enacted, and Changes to a disability-friendly working environment should be activated so that participants can participate.

• Ecology and Resilient Infrastructure
• /
• v.10 no.3
• /
• pp.85-96
• /
• 2023

The study involved the categorization of domestic lakes located in South Korea into three groups based on their salinity levels: upstream reservoirs with salinity less than 0.3 psu, estuarine reservoirs with salinity ranging from 0.3 to 2 psu, and brackish lagoons with salinity exceeding 2 psu. Subsequently, the research assessed variations in the concentrations of total nitrogen (T-N) and total phosphorus (T-P) in the sediment of these lakes using statistical analysis, specifically one-way analysis of variance (ANOVA). Additionally, a laboratory core incubation test was conducted to investigate the benthic nutrient fluxes in Songji lagoon (salinity: 11.80 psu), Ganwol reservoir (salinity: 0.73 psu), and Janggun reservoir (salinity: 0.08 psu) under both aerobic and anoxic conditions. The findings revealed statistically significant differences in the concentrations of T-N and T-P among sediments in the lakes with varying salinity levels (p<0.05). Further post-hoc analysis confirmed significant distinctions in T-N between upstream reservoirs and estuarine reservoirs (p<0.001), as well as between upstream reservoirs and brackish lagoons (p<0.01). For T-P, a significant difference was observed between upstream reservoirs and brackish lagoons (p<0.01). Regarding benthic nutrient fluxes, Ganwol Lake exhibited the highest diffusive flux of NH₄⁺-N, primarily due to its physical characteristics and the inhibition of nitrification resulting from its relatively high salinity. The flux of NO₃^--N was lower at higher salinity levels under aerobic conditions but increased under anoxic conditions, attributed to the impact of salinity on nitrification and denitrification. Additionally, the flux of PO₄^3--P was highest in Songji Lake, followed by Ganwol Lake and Janggun Reservoir, indicating that salinity promotes the diffusive flux of phosphate through anion adsorption competition. It's important to consider the influence of salinity on microbial communities, growth rates, oxidation-reduction processes, and nutrient binding forms when studying benthic diffusive nutrient fluxes from lake sediments.

• Journal of Navigation and Port Research
• /
• v.47 no.3
• /
• pp.147-154
• /
• 2023

This study aims to determine the necessity, role, utilization, and operation and management plan in relation to the underwater space platform where humans can newly reside. It provides a comprehensive opinion on the need for creating undersea space and operation plans based on opinions of industry-university-affiliated organizations involved in the R&D project of the Ministry of Maritime Affairs and Fisheries for the utilization of undersea space and external experts participating in marine technology development. In this study, a survey was conducted on researchers participating in the construction of a Korean submarine space platform. FGI was conducted on marine technology development experts. Results were then derived. As a result of the analysis, the need for subsea space construction was found to be high. As for the role of subsea space, the most common opinion was to develop technology for utilizing subsea space and to secure marine science research functions. It was found that the creation of subsea space would have a positive impact on the domestic industry, especially the deep-sea development industry and the shipbuilding/offshore structure industry. In terms of utilization, after the end of the seabed space test bed, the response to utilization as a marine observation base and marine ecosystem research had the highest proportion. As for expected inconvenience, discomfort in the psychological environment was the highest. Experts suggest that securing a continuous budget is most important for stable operation in the future and that securing a manpower budget is essential for itemized budgets. In addition, it was judged that it would be appropriate to establish a prior agreement from the time of the prior agreement and prepare a countermeasure before proceeding with the project in order to ensure ownership issues, consignment management issues, and cost issues when using the project after the end of the project.

• Korea Trade Review
• /
• v.48 no.3
• /
• pp.43-68
• /
• 2023

In this study, in relation to "Chapter 3 Support for Priority Purchase of Technology Development Products" of the 「Market Channel Support Act」, this study investigated the positive growth impact of technology development products subject to preferential purchase on small and medium sized enterprises. The data used for empirical verification is for 371 companies that obtained certification for technology development products subject to preferential purchase in 2016 and Data from SMEs were collected from 2017 to 2021, Sales, operating profit, and net profit was identified, and empirical verification. And conducted through statistical analysis to determine whether it had a positive effect on the growth factors of SMEs. In addition, data from 225 technology development product certification companies were collected, and empirical testing was conducted through t-test analysis on the change in growth factors before and after acquiring certification. As a result of statistical analysis, it was found that the total assets, certified sales, operating profit, and net profit, which are the growth factors of a company, are all positively affected according to the type of technology development product certification. However, in the case of authentication types, some authentications showed significant negative results. In addition, significant results were derived that after acquiring certification had a positive effect on growth factors than before acquiring certification. Consistent with this conclusion, I think that it is effective for technology development-based SMEs to enter the public procurement market and utilize the technology development product priority purchase policy for market exploitation and corporate growth. And the government should strengthen the market support policy to create demand so that SMEs can enter the procurement market and actively utilize the preferential purchase system, and come up with an improvement plan so that public institutions can actively utilize the preferential purchase system.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.72-81
• /
• 2024

Purpose: This study aimed to assess the marginal and internal fit of 3-unit monolithic zirconia fixed partial dentures (FPDs) fabricated via computer-aided design and computer-aided manufacturing (CAD/CAM) from solid working casts and removable die system. Materials and Methods: The tooth preparation protocol for a zirconia crown was executed on the mandibular right first premolar and mandibular right first molar, with the creation of a reference cast featuring an absent mandibular right second premolar. The reference cast was duplicated using polyvinyl siloxane impression, from which 20 working casts were fabricated following typical dental laboratory procedures. For comparative analysis, 10 FPDs were produced from a removable die system (RD group) and the remaining 10 FPDs from the solid working casts (S group). The casts were digitized using a dental desktop scanner to establish virtual casts and design the FPDs using CAD. The definitive 3-unit monolithic zirconia FPDs were fabricated via a CAM milling process. The seated FPDs on the reference cast underwent digital evaluation for marginal and internal fit. The Mann-Whitney U test was applied for statistical comparison between the two groups (α = 0.05). Results: The RD group showed significantly higher discrepancies in fit for both premolars and molars compared to the S group (P < 0.05), particularly in terms of marginal and occlusal gaps. Color mapping also highlighted more significant deviations in the RD group, especially in the marginal and occlusal regions. Conclusion: The study found that the discrepancies in marginal and occlusal fits of 3-unit monolithic zirconia FPDs were primarily associated with those fabricated using the removable die system. This indicates the significant impact of the fabrication method on the accuracy of FPDs.