• Journal of Environmental Impact Assessment
• /
• v.18 no.2
• /
• pp.89-97
• /
• 2009

Korean society is faced with various new problems arising from the development projects of new towns, industrial cities, large-scale residential complexes, etc. started from the 1970s. Particularly with the construction of residential and industrial complexes by the roadsides, they are openly exposed to road traffic noise and vibration. Thus, the objective of this study is to examine using noise maps how increasing traffic volume affects road traffic noise and what problems it causes in areas where new towns or complexes are constructed by development projects. According to the results of this study, in areas around the sites of development projects, the noise level increased by road traffic noise compared to that before development and was 1.16~6.92 times higher than the environmental noise standard, but measures to reduce road traffic noise was lukewarm. In addition, areas with soundproof facilities showed a noise level 1~3 step lower than other areas, and in individual buildings, the noise level on the side facing the road was 1~2 step higher than that on the rear side.

• Journal of Environmental Impact Assessment
• /
• v.17 no.4
• /
• pp.213-224
• /
• 2008

Since 1970's rapid urbanization and economic growth, the population was highly increased and residential type was changed from single detached house to high density and high-rise apartment. Recently more high-rise residential building generates more traffic volumes and it makes spatial concentration. The highly traffic volumed road and high residential building was constructed nearby, it occurs noise problem. The purpose of this study is comparing the performance of three type noise barrier between noise source and receiver using a noise map simulation. Three types were composed as road side planting trees, building side planting trees and noise barrier wall. Planting trees is less effective than noise barrier wall as a noise barrier. And they are all effective under 3 stories than over 5 stories, especially noise barrier function can't work over 5 stories.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1686-1694
• /
• 2003

The foam-filled tube beams can be used for the front rail and firewall structures to absorb impact energy during frontal or side collision of vehicles. In the case of side collision where bending is involved in the crushing mechanism, the foam filler would be effective in maintaining progressive crushing of the thin-walled structures so that much impact energy could be absorbed. In this study, bending behaviors of the closed-cell-aluminum-alloy-foam-filled stainless steel tube were investigated. The various foam-filled specimens including piecewise fillers were prepared and tested. The aluminum-alloy-foam filling offered the significant increase of bending resistance. Their suppression of the inward fold formation at the compression flange as well as the multiple propagating folds led to the increase of load carrying capacity of specimens. Moreover, the piecewise foams would provide the easier way to fill the thin-walled shell structures without the drawback of strength.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.9
• /
• pp.4391-4394
• /
• 2016

Background: Platinum-based regimens are effective treatments for advanced non-small cell lung cancer (NSCLC), but the five-year survival rate is still less than 20%. One possible factor appears to be resistance involving polymorphisms in the CTR1 gene which plays an importance role in accumulation of platinum in the cytoplasm. Purpose: To establish both prevalence of CTR1 polymorphism and its impact on treatment related toxicity in Thai advanced NSCLC patients. Materials and Methods: Thirty-two advanced NSCLC participants received carboplatin and gemcitabine during January to June 2016 at King Chulalongkorn Memorial Hospital (KCMH) were recruited for analysis of the CTR1 rs12686377 genotype. These participants were planning to be treated with platinum-based chemotherapy for at least two cycles. Results: Allele frequency of CTR1 polymorphism $G{\rightarrow}T$ was found to be 25%. The results showed that genetic polymorphism at CTR1 rs12686377 was associated with emesis side effects (P = 0.020) and neuropathic symptoms (P = 0.010). In addition, hematologic side effects in terms of anemia also tended to be related to this polymorphism. Conclusions: This is the first study suggesting that polymorphism at CTR1 rs12686377 may be associated with toxicity from platinum-based regimens. Therefore, it could be a factor to aid in treatment decision-making.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.113-122
• /
• 2018

A hydraulic breaker is an attachment of an excavator, and it crushes stones. Recently, research to reduce the impact and noise of breakers are ongoing. In this paper, a method to improve the upper, lower, and side dampers, which act as insulation for the attenuation of vibration during breaker operation, is studied through testing and simulation. To obtain the nonlinear material constants required for the simulation, the biaxial tensile test was performed with urethane, which is a material used for dampers. The existing parts and the improved parts were compared and evaluated using the LS-DYNA program. As a result, 50% of the equivalent stress was reduced in the bracket body of the hydraulic breaker, and the equivalent stress of the side damper was also decreased. We verified that the fatigue conditions were satisfied by performing a fatigue analysis.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.108-113
• /
• 2005

The damageability and repairability of similar platform type vehicles could be very concerned with design optimization. In all the vehicles crash tested, small size passenger vehicles were weakness in aspect of damageability and repairability. The most critical area appears to be repair cost considering that parts cost is the largest portion of total repair cost segments. Besides repair cost, attaching method of front sidemember and subframe are placed special importance for impact energy absorption and damageability and repairability. So in order to improve damageability and repairability of vehicle structure and body component of the monocoque type passenger vehicles, the end of front side member and front back beam should be designed with optimum level and to supply the end of front side member as a partial condition approx 300mm. The effectiveness of design concept on the 40% offset frontal impact characteristics of the passenger vehicle structure is investigated and summarized.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.91-99
• /
• 2013

Car cross beam made by aluminium for new car is designed for the substitution of steel and it can be verified the performance by computer simulations. The parts of car cross beam are designed to replace steel parts according to their manufacturing processes. At the first stage, the weight of the aluminium car cross beam can be reduced to 75% by comparing with that of steel car cross beam. But NVH performance of the aluminium car cross beam becomes slightly insufficient as compared with that of steel car cross beam. Taguchi method is adopted to optimize the design variables affecting NVH characteristics of car cross beam. New car cross beam is designed at the second stage by using these analysis results. Weight reduction can be obtained to 31.7% by design modification and material change of car cross beam in comparison with the original steel one. NVH characteristics of aluminium car cross beam become on an equal level with the steel car cross beam. By side impact analysis results, new car cross beam has higher performance as compared with the steel car cross beam.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.91-94
• /
• 2008

In this paper, we searched for impact factors by brainstorming and calculated the weights of them using the Analytic Hierarchy Process(AHP) method in order to develop energy technology strategy for the future. AHP is a useful method for evaluating multi-criteria decision making problems. We selected 3 criteria(possibility of success for developing technology, application of the technology, technical spin-off) and 10 sub-criteria. According to the result in this study, the most important sub-criterion is the possibility of commercialization, the second is the possibility of developing the fundamental technology, and the third is the possibility of convergence technology. The other side, the lowest important sub-criterion is the difference of technical standards as compared with advanced countries.

• Computers and Concrete
• /
• v.26 no.5
• /
• pp.377-384
• /
• 2020

A two-dimensional particle flow cod (PFC) is used to study the effect of missile impact on the concrete target. For this purpose firstly calibration of numerical model was performed so that tensile strength of numerical models and experimental sample were the same. Secondly, a concrete model was built. The number of concrete layers and the angle of concrete layers related to horizontal axis were changed. Their numbers were 1, 2, 3 and 4. The angles were 0°, 15°, 30°, 45°, 60°, 75° and 90°. A semi-circle missile was simulated at top of the concrete layers. Its velocity in opposite side of Y direction was 100 m/s. three measuring circles were situated at the below the missile in the model to receive the applied force. The load in the missile and measuring circles together with failure pattern were registered at the beginning of the impaction. The results show that concrete layers number and concrete layers angle have important effect on the failure load while the failure pattern was nearly constant in all of the models.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.104-113
• /
• 2010

Domestic insurance claims were statistically investigated to analyze the elderly driver's accident patterns and injury types in side impact crashes. Medical treatment records and accident vehicle damage photos have been surveyed for 5,419 cases. The results of our statistical analysis showed that the thorax injury risk of the elderly drive group is 8.8 and 4.0 times higher than that of the young and middle age group respectively. Diagnosis showed that most thorax injuries were caused by rib fracture. The head injury risk of the elderly female driver group seemed to be higher than that of the younger female driver group, however, statistical test has not been conducted because of the lack of number of samples for elderly female accident.