• International Journal of Automotive Technology
• /
• 제4권3호
• /
• pp.149-156
• /
• 2003

This paper is concerned with the energy absorption efficiency of auto-body side structures for the conventional steel and 60TRIP high strength steel. In order to evaluate the energy absorption efficiency, the dynamic crash analysis is carried out with the regulation of US-SINCAP. The analysis adopts the Johnson-Cook model for the dynamic material properties, which have been obtained from dynamic material tests. For the sake of the dynamic material properties, the analysis has been accurately peformed for the crashworthiness assesment. The analysis result provides deformed shapes, amounts of penetration and accelerations at several important points during crash. The result confirms that 60TRIP greatly improves the crashworthiness of the side members without sacrificing the weight and thus can be used for the light-weight design of an auto-body.

• 자동차안전학회지
• /
• 제6권1호
• /
• pp.5-9
• /
• 2014

Over the past ten years, since the introduction of the side crash test regulation in Europe, much research work has been performed internationally to develop new and modified test procedures to improve the level of occupant protection offered by vehicles in side crash test. This research has been co-ordinated and finally contributed to development of an AE-MDB(Advanced European Moving Deformable Barrier) and WorldSID (Worldwide Side Impact Dummy). EuroNCAP(European New Car Assessment Program) has the plan to conduct AE-MDB side crash test using WorldSID from 2015 by replacing Progressive MDB and EuroSID II. Automobile manufacturers need to respond to these changes closely. This paper is to find dominant control factor and analyze it of WorldSID 50%ile dummy injury through AE-MDB side crash test by predicting best and worst condition. And control factors will be validated within EuroNCAP regulations. This paper is analyzed by DFSS(Design for six sigma) which contains 5 control factors and is evaluated by ANOVA with the data as a result of LS-DYNA analysis correlated with crash pulse from 50 kph AE-MDB side crash test using WorldSID 50%ile dummy.

• 자동차안전학회지
• /
• 제6권1호
• /
• pp.41-47
• /
• 2014

A new dummy has improved biofidelity from Fair to Good compare with EuroSID2re which is currently used for regulation tests and NCAP tests. Some instrumentation of each body region has been changed to measure the assessment of injury risk. The objective of this study is to find out the injury characteristic of each dummy and to calculate the relation between external force and injury for each dummy with pendulum tests. Finally, this study suggests the optimized external force to meet consumer tests. A new dummy named WorldSID for side impact will be introduced into EuroNCAP tests after 2015. Korea government is also planning to adopt WorldSID at KNCAP tests from 2017 and Global Technical Regulation (GTR) will also adopt WorldSID to oblique side pole crash.

• 소성∙가공
• /
• 제15권8호
• /
• pp.556-561
• /
• 2006

Most of auto-body members are composed of stamping parts. These parts have the non-uniform thickness and plastic work hardening distribution during the forming process. This paper is concerned with the side impact analysis of the ULSAB-AVC model according to the US-SINCAP in order to compare the crashworthiness between the model with and without considering the forming effect. The forming effect is ca]ciliated by one-step forming analysis for several members. The crashworthiness is investigated by comparing the deformed shape of the cabin room the energy absorption characteristics and the intrusion velocity of a car. The result of the crash analysis demonstrates that the crash mode, the load-carrying capacity and energy absorption can be affected by the forming effect. It is noted that the design of an autobody should be carried out considering the forming effect for accurate assessment of crashworthiness.

• The Journal of Asian Finance, Economics and Business
• /
• 제1권3호
• /
• pp.29-36
• /
• 2014

This paper attempts to measure the impact of non-financial factors including analyst practices and broker resources on performance of sell side research. Results reveal that these non-financial factors have a measurable impact on performance of target price forecasts. Number of pages written by an analyst (surrogate for analyst practice) is significantly and directly linked with target price accuracy indicating a more elaborate analyst produces better target price forecasts. Analyst compensation (surrogate for broker resource) is significantly and inversely linked with target price accuracy. Out performance by analysts working with lower paying firms is possibly associated with motivation to migrate to higher paying broking firms. The study finds that employing more number of analysts per research report has no significant impact on target price accuracy -negative coefficient indicates that team work may not result in better target price forecasts. Though insignificant, long term forecast horizon negatively affects target price accuracy while stock volatility improves target price accuracy.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.14-19
• /
• 2014

The global demand for reduction in the weight of automobiles has led many countries to focus on the development of hybrid, eco-friendly, and electric cars. Reduction in the weight of materials can both increase fuel efficiency and maximize automobile performance. Therefore, the design of automobile should be inclined towards the safety aspects. but at the same time, it also consider reducing the structural weight of an automobile. In this study, CFRP side members with circular and double hat shaped section was manufactured. The impact collapse tests performed with change of the stacking condition, such as variation of interface number and outerlayer angle. The impact collapse load and absorbed energy were quantitatively analyzed according to the changes in section shapes and stacking condition. This analysis was performed to obtain design data that can be applied in the development of optimum lightweight members for automobiles.

• 자동차안전학회지
• /
• 제12권1호
• /
• pp.39-45
• /
• 2020

The express/intercity bus models have been developing for wheelchair users to provide the preferable long-distance travels by the Korean government research. In the previous studies, evaluation method was set up for the wheelchair users' safety and the study for wheelchair occupants' safety was performed under various crash loadings mimic to real accidents, frontal crash, side impact and rollover, etc. This study was focused on the evaluation of occupant behaviors and injuries (head and chest) during vehicle impact loading cases in order to ensure the safety of wheelchair passengers in the bus. The occupant response and belt loading data during the sled FE simulation were compared with those of the sled test. The simulation results showed overall safety tolerances of wheelchair occupants under the severe frontal deceleration, side impact loading based on the FMVSS 214 configuration and bus rollover loading.

• 한국산학기술학회논문지
• /
• 제20권7호
• /
• pp.166-172
• /
• 2019

금속 일체형 판재 도어 임팩트 빔 개발을 위해 단면 형상의 최적설계를 진행하였다. 기존의 도어 임팩트는 충격을 흡수하는 강관과 양쪽에 브라켓을 용접하여 자동차에 설치하는 구조로 이루어졌다. 하지만, 브라켓을 설치하기 위한 용접작업은 생산성을 떨어뜨리고 생산단가를 증가시키는 과정이다. 이러한 단점을 극복하기 위해 일체형 판재 도어 임팩트 빔의 개발은 반드시 필요한 공정이다. 본 논문에서는 일체형 판재 도어 임팩트의 단면 형상을 수치해석의 방법으로 제안하는 연구를 진행하였다. 외부 충격에 대한 반력 하중 및 생산성을 고려하여 엔지니어의 직관적인 설계 형상 6가지에 대하여 수치해석을 진행하였다. 객관적인 비교를 위해 3점 굽힘 하중 실험을 모사하는 유한요소해석을 진행하였다. 형상과 치수가 상이한 6가지의 단면 형상 중 최적의 형상을 선정하고, 상세 설계를 위해 단면형상의 높이와 폭의 치수를 변화시키며 해석을 진행하였다. 이를 통해, 일체형 판재 도어 임팩트의 최적의 단면 형상을 제안하였다.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.2109-2115
• /
• 2001

Miniaturized specimen technology is useful to characterize the mechanical behavior when it is difficult to sample the material enough for the test. In this study, two kinds of miniaturized Charpy impact specimens(i.e., miniaturized specimen with side groove and without side groove) of aged 1Cr- lMo-0.25V steel were prepared and tested. The relationship between the extent of degradation in terms of ductile brittle transition temperature(DBTT) and the fracture stress of 1Cr-1Mo-0.25V steel was established. The fracture stress obtained from miniaturized specimen without side groove turned out to be linearly related with the DBTT of standard specimen. Therefore the fracture toughness of aged turbine rotor steel might be evaluated by the fracture stress. In addition, the correlation between DBTT of standard specimen and that of miniaturized specimen was investigated. As the results of normalizing DBTT by maximum elastic tensile stress, the normalized DBTT of miniaturized specimen without side groove allows one to estimate that of standard specimen.

• Asia Marketing Journal
• /
• 제16권1호
• /
• pp.35-69
• /
• 2014

The impact of competition on pricing has been studied in the context of counterfactual merger analyses where expected optimal prices in a hypothetical monopoly are compared with observed prices in an oligopolistic market. Such analyses would typically assume static decision making by consumers and firms and thus have been applied mostly to data obtained from consumer packed goods such as cereal and soft drinks. However such static modeling approach is not suitable when decision makers are forward looking. When it comes to the markets for durable products with indirect network effects, consumer purchase decisions and firm pricing decisions are inherently dynamic as they take into account future states when making purchase and pricing decisions. Researchers need to take into account the dynamic aspects of decision making both in the consumer side and in the supplier side for such markets. Firms in a two-sided market typically subsidize one side of the market to exploit the indirect network effect. Such pricing behaviors would be more prevalent in competitive markets where firms would try to win over the battle for standard. While such qualitative expectation on the relationship between pricing behaviors and competitive structures could be easily formed, little empirical studies have measured the extent to which the distinct pricing structure in two-sided markets depends on the competitive structure of the market. This paper develops an empirical model to measure the impact of competition on optimal pricing of durable products under indirect network effects. In order to measure the impact of exogenously determined competition among firms on pricing, we compare the equilibrium prices in the observed oligopoly market to those in a hypothetical monopoly market. In computing the equilibrium prices, we account for the forward looking behaviors of consumers and supplier. We first estimate a demand function that accounts for consumers' forward-looking behaviors and indirect network effects. And then, for the supply side, the pricing equation is obtained as an outcome of the Markov Perfect Nash Equilibrium in pricing. In doing so, we utilize numerical dynamic programming techniques. We apply our model to a data set obtained from the U.S. video game console market. The video game console market is considered a prototypical case of two-sided markets in which the platform typically subsidizes one side of market to expand the installed base anticipating larger revenues in the other side of market resulting from the expanded installed base. The data consist of monthly observations of price, hardware unit sales and the number of compatible software titles for Sony PlayStation and Nintendo 64 from September 1996 to August 2002. Sony PlayStation was released to the market a year before Nintendo 64 was launched. We compute the expected equilibrium price path for Nintendo 64 and Playstation for both oligopoly and for monopoly. Our analysis reveals that the price level differs significantly between two competition structures. The merged monopoly is expected to set prices higher by 14.8% for Sony PlayStation and 21.8% for Nintendo 64 on average than the independent firms in an oligopoly would do. And such removal of competition would result in a reduction in consumer value by 43.1%. Higher prices are expected for the hypothetical monopoly because the merged firm does not need to engage in the battle for industry standard. This result is attributed to the distinct property of a two-sided market that competing firms tend to set low prices particularly at the initial period to attract consumers at the introductory stage and to reinforce their own networks and eventually finally to dominate the market.