Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Normalization of DBTT Size Effect far Aged 1Cr-lMo-0.25V Steel

열화된 1Cr-1Mo-0.25V강의 DBTT 크기효과 보정에 관한 연구

  • Published : 2001.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Miniaturized specimen technology is useful to characterize the mechanical behavior when it is difficult to sample the material enough for the test. In this study, two kinds of miniaturized Charpy impact specimens(i.e., miniaturized specimen with side groove and without side groove) of aged 1Cr- lMo-0.25V steel were prepared and tested. The relationship between the extent of degradation in terms of ductile brittle transition temperature(DBTT) and the fracture stress of 1Cr-1Mo-0.25V steel was established. The fracture stress obtained from miniaturized specimen without side groove turned out to be linearly related with the DBTT of standard specimen. Therefore the fracture toughness of aged turbine rotor steel might be evaluated by the fracture stress. In addition, the correlation between DBTT of standard specimen and that of miniaturized specimen was investigated. As the results of normalizing DBTT by maximum elastic tensile stress, the normalized DBTT of miniaturized specimen without side groove allows one to estimate that of standard specimen.

Keywords

References

  1. Manahan, M. P., 1990, 'Determination of Charpy Transition Temperature of Ferritic Steels Using Miniaturized Specimens,' Journal of Materials Science, vol. 25, pp. 3429-3438 https://doi.org/10.1007/BF00575367
  2. Rolfe, S. T. and Barsonm, J. M., 1977, Fracture and Fatigue Control in Structures, Prentice Hall, Englewood Cliffs, New Jersey
  3. Firrao, D., Begley, J. A., Silva, G., Roberti, R. and DeBenedetti, B., 1982, 'The Influence of Notch Root Radius and Austenitizing Temperature on Fracture Appearance of As-Quenched Charp-V Type AISI 4340 Steel Specimens,' Metallurgical Transactions A, vol. 13A, pp. 1003-1013
  4. Corwin, W. R. and Houghland, A. M., 1986, 'Effect of Specimen Size and Material Condition on the Charpy Impact Properties of 9Cr-1Mo-V-Nb Steel,' ASTM STP 888, pp.325-338 325-338
  5. 남승훈, 박종화, 김엄기, 1999, '소형 샤르피 충격시험편을 이용한 1Cr-1Mo-0.25V 강의 인성 열화도 평가,' 대한기계학회논문집(A), 제 23 권, 제 12호, pp. 2303-2308
  6. Kumar, A. S., Louden, B. S., Garner, F. A. and Hamilton, M. L., 1993, 'Recent Improvements in Size Effects Correlations for DBTT and Upper Shelf Energy of Ferritic Steels,' ASTM STP 1204, pp. 47-61
  7. 김훈, 김주학, 지세환, 홍준화, 199, '샬피 충격시험에 있어서 시험편 크기의 영향,' 대한기계학회논문집(A), 제 21권, 제 1호, pp. 93-103
  8. Lucas, G. E., Odette, G. R. and Sheckherd, J. W., 1986, 'Recent Progress in Subsized Charpy Impact Specimen Testing for Fusion Reactor Materials Development,' Fusion Technology, Vol. 10, pp. 728-733
  9. 남승훈, 김엄기, 유광민, 1998, '전기비저항을 이용한 1Cr-1Mo-0.25V 강의 인성열화의 비파괴적평가,' 대한기계학회논문집(A), 제 22권, 제 5호, pp. 814-820
  10. Abdel-Latif A. M., Corbett, J. M., Sidey, D. and Taplin, D. M. R., 1981, 'Effects of Microstructural Degradation on Creep Life Prediction of 2.25Cr-1Mo Steel,' Proceedings of 5th International Conference on Fracture(ICF5), Cannes, Fance, Vol. 4, pp. 1613-1620
  11. ASTM Standard E23, 1997, 'Notched Bar Impact Testing of metallic Materials,' ASTM Philadelphia
  12. Ronsinski,S.T., Kumar,A.S., Cannon,N.S. and Hamilton,M.L., 1993, 'Application of Subsize Specimens in Nuclear Plant Life Extension,' ASTM STP 1204, pp. 405-416
  13. Neuber, H., 1958, Theory of Notch Stresses, 2nd ed., Springer Publishers, Berlin, p. 71
  14. Lucas, G. E., Odett, G. R., Sheckherd, J. W., McConnell, P. and Perrin, J., 1986, 'Subsized Bend and Charpy V-Notch Specimens for Irradiated Testing,' ASTM STP 888, pp. 305-324