• Restorative Dentistry and Endodontics
• /
• v.45 no.4
• /
• pp.42.1-42.9
• /
• 2020

Objective: This study aimed to examine the physical properties (pH and flow) of 2 novel bioceramic sealers. Materials and Methods: The tested sealers were a calcium hydroxide sealer (Sealapex) and 2 bioceramic sealers (BioRoot RCS and TotalFill BC Sealer). Flow measurements were conducted according to ISO 6876/2012, with a press method of 0.05 mL of sealer. The pH of fresh samples was tested immediately after manipulation, while set samples were stored for 3 times the recommended setting time. The predetermined time intervals ranged from 3 minutes to 24 hours for fresh samples and from 10 minutes to 7 days and 4 weeks for the set samples. Analysis of variance was performed, with p = 0.05 considered indicating significance. Results: The mean flow values were 26.99 mm for BioRoot, 28.19 for Sealapex, and 30.8 mm for TotalFill BC Sealer, satisfying the ISO standard. In the set samples, BioRoot RCS had higher pH values at 24 hours to 1 week after immersion in distilled water. At 2 weeks, both bioceramic sealers had similar pH values, greater than that of Sealapex. In the fresh samples, the bioceramic sealers had significantly higher initial pH values than Sealapex (p < 0.05). At 24 hours post-immersion, all sealers showed an alkaline pH, with the highest pH observed for TotalFill. Conclusions: The TotalFill BC Sealer demonstrated the highest flow. The bioceramic sealers initially presented higher alkaline activity than the polymeric calcium hydroxide sealer. However, at 3 and 4 weeks post-immersion, all sealers had similar pH values.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.16-22
• /
• 2023

In this study, a salt water immersion test was performed on concrete specimens simulating the concrete mix design of the nuclear power plant, and the correlation between the amount of chloride and the XRF component according to the depth of the concrete was analyzed. The amount of chloride on the surface of the nuclear power plant concrete increased slightly with increasing immersion time in salt water, but the amount of chloride in the depth of 5.5 mm or more showed a clear tendency to increase with increasing immersion time in salt water. As a result of analyzing the correlation between the amount of chloride in concrete and the XRF component, the concrete with 20% FA substitution compared with the OPC concrete showed a very high correlation between the composition ratio of Cl ions and the evaluation result of salt damage resistance by XRF component analysis. Accordingly, it was confirmed that chlorine ion analysis and salt damage resistance performance evaluation by XRF component analysis were possible through repeated data accumulation in the nuclear power plant concrete mix with 20% fly ash replacement.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.60-71
• /
• 2014

This study was conducted to identify the potential of rape stalk as a raw material for biorefinery process of rape flower. At first, rape stalk (RS) was immersed in distilled water (DW), acetic acid (AA), oxalic acid (OA), sulfuric acid (SA) and sodium hydroxide (SH) solutions, and the content of reducing sugars liberated from immersed RS was analyzed. Glucose, xylose, arabinose and sucrose were detected varying with the immersion type. In particular, 1% AA-immersion of RS for 72 hr was the most effective conditions to liberate glucose from RS. Secondly, the RS residues were used for elementary analysis and fabrication of fuel pellets. In addition to the solution type, concentration of immersion solutions (0%, 1%, 2%) and immersion time (24, 72, 120 hr) were used as experimental factors. The contents of nitrogen, sulfur and chlorine reduced effectively through the immersion of RS in DW, AA and OA solutions. For properties of RS-based pellets, bulk density and higher heating value of RS-based pellets greatly increased with the immersion of RS, and the qualities were much higher than those of the A-grade pellet of the EN standards. Ash content decreased remarkably through the immersion of RS, and was satisfied with the A-grade pellet standard. Durability was negatively affected by the immersion of RS, and did not reached to B-grade of the EN standard. In conclusion, acid immersion of RS can be a pretreatment method for the production of fuel pellet and bioethanol, but use of the immersed RS for the production of high-quality pellets might be restricted due to low durability of immersed-RS pellets. Therefore, further studies, such as investigation of detailed immersion conditions, fabrication of mixed pellets with wooden materials and addition of binders, are needed to resolve the problems.

• Honam Mathematical Journal
• /
• v.32 no.2
• /
• pp.261-269
• /
• 2010

In this article, we study ruled submanifolds with nonde-generate rulings in a Lorentzian space-time, which have finite type immersion. We give a condition for k-finite type submanifolds to be of finite type.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.6
• /
• pp.586-590
• /
• 2009

Poisson's ratio, one of elastic constants of elastic solids, has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Rigid couplants for transverse wave is one of obstacle for scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was applied. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected, and transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio was determined without the information of specimen thickness. Poisson's ratio distribution of the carbon steel weldment was mapped. Heat affected zone of the weldment was clearly distinguished from base and filler metals.

• Journal of Korean Society for Quality Management
• /
• v.32 no.4
• /
• pp.196-207
• /
• 2004

TDR(Tear Down & Redesign)means that renounce the past resolutely, from a white paper condition, let's change directions. That is, let's redesign from the basic of the establishment of the construction process. Through the switchover the conception, innovate totally the whole existing processes. TDR is the best core innovation activity. The ultimate aim of the TDR activity induces the employees to do more productive business and obtain excellent results in the future by solving the problems, which are the nonproductive business in the business process on the objective view, the business that customers don't recognize the value, the same old practice of business, and the unsettled business from the restriction of resources. By organizing the related to workers of those business, they can solve the problems for 3-4months by full time working This paper inquires what are the obstruction factors on the process of executing TDR activity. Through the search of the reformation plan for the improvement of immersion degree, it presents some methods to be successful business.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.2 s.15
• /
• pp.37-39
• /
• 2006

We employed in-situ spectroscopic ellipsometry(SE) and imaging ellipsometry(IE) to study the interaction of water and photoresist(PR) in 193 immersion lithography. Real time measurement of SE showed thickness increase when PR was immerged in water indicating swelling effect. From the temporal evolution we could observe its reaction-limited behavior. Meanwhile, IE could identify the modification of PR surface by contact of water even for a short period of a second.

• English Language & Literature Teaching
• /
• v.7 no.1
• /
• pp.67-89
• /
• 2001

This paper is to introduce assorted features of a four-week English Immersion Program managed by Hongik English Language Institute for the first time in summer 2000. The program was aimed to provide English learners with the English simulation environment where everything was supposed to be English only. Thus being exposed exclusively to the English surroundings the clock around, the learners who had not had enough opportunities to use the language were able to attain a high motivation for speaking English, which eventually led to the increase of their general English language proficiency. Presenting merits and demerits of the curriculum and the overall management of the program, this paper plays a role in directing the program in a more improved way for the future and giving guidelines to other institutes where similar programs are under consideration.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.88-95
• /
• 2013

Effects of beating and water immersion time on fiber swelling and paper properties were elucidated for the fundamental study of producing high bulk paper. Chemical pulps were beaten for various freeness and the beaten pulp was immersed in water up to 24 hours. Fiber swelling was evaluated by measuring water retention value (WRV). It was found that fiber swelling, bulk and paper strength were quickly changed at the initial stage of beating. Immersion in water did not significantly increase WRV, paper density and strength, implying that soaking in water alone could not effectively swell fiber wall. In order to swell further, hydrogen bonds between fibrils in fiber wall and hence fiber wall structure shall be broken by mechanical force during beating.

• Corrosion Science and Technology
• /
• v.21 no.1
• /
• pp.41-52
• /
• 2022

Herein, we report polyvinyl butyral composites coatings containing various loadings of 72-h bath sonicated hexagonal boron nitride particles (5 ㎛) to enhance barrier properties of coatings. Barrier properties of coatings were determined in 3.5 wt% NaCl after different time periods of immersion via electrochemical techniques such as open circuit potential, electrochemical impedance spectroscopy, and potentiodynamic polarization test. Coatings containing sonicated hexagonal boron particles exhibited improved corrosion resistance for longer periods of immersion compared to neat coating. We also discussed effects of hexagonal boron nitride on healing properties of polyvinyl butyral. Coatings containing 1.0 wt% loading of sonicated hexagonal boron nitride showed improved long-term barrier properties than coatings with other compositions. The presence of hexagonal boron nitride also affected the healing properties of polyvinyl butyral coatings besides their barrier properties. Such improved barrier properties of composites coatings were attributed to the high aspect ratio, plate-like shape, and electrically insulated nature of the filler.