• 마이크로전자및패키징학회지
• /
• 제18권1호
• /
• pp.35-39
• /
• 2011

고속전단시힘의 표준화를 위한 기초 연구의 일부로 Sn-3.0wt%Ag-0.5wt%Cu 솔더 볼의 고속전단특성에 대한 연구를 수행 하였다. 고속전단 시험편 제작을 위해 직경 450 ${\mu}m$의 솔더 볼을 FR4 PCB (Printed Circuit Board) 위에 장착한 후 $245^{\circ}C$ 온도에서 리플로 솔더링을 행하였다. PCB 상의 금속 패드로는 ENIG (Electroless Nickel/mmersion Gold, i.e Cu/Ni/Au)와 OSP (Organic Solderability Preservative, Cu 패드)를 사용하였다. 고속전단 속도는 0.5~3.0 m/s 범위, 전단 팁의 높이는 10~135 ${\mu}m$ 범위에서 변화시켰다. 실험결과로서, OSP 패드의 경우 전단 팁 높이 증가에 따라 연성 파괴가 증가하였으며, 전단속도 증가에 따라 연성파괴는 감소되었다. ENIG 패드의 경우에도 전단 팁 높이 증가에 따라 연성 파괴가 증가하였다. 전단 팁 높이 10 ${\mu}m$(볼 직경의 2%)는 패드 박리 파괴가 대부분이어서 전단파면 관찰에는 부적절한 높이였다. 고속전단에너지는 OSP 및 ENIG 패드 모두 전단 팁 높이 증가에 따라 증가하는 경향을 보였다.

• 마이크로전자및패키징학회지
• /
• 제30권4호
• /
• pp.61-68
• /
• 2023

무연솔더에 Fe 입자를 첨가하여 Cu₃Sn 금속간화합물 성장을 억제하고 취성파괴를 방지하는 연구는 보고된 바 있으나 이러한 복합솔더를 TLP(transient liquid phase) 본딩에 적용한 경우는 아직 없다. 본 연구에서는 Sn계 무연솔더 내부에 Fe 입자의 함량을 적절히 조절하여 Sn-3.5Ag-15.0Fe 복합솔더를 제작하고 TLP 본딩에 적용하여 접합부 전체를 Sn-Fe 금속간화합물로 변화시킴으로써 고온 솔더로서의 적용 가능성을 탐색하였다. 접합공정 중에 형성되는 FeSn₂ 금속간화합물은 513℃의 고융점을 가지므로 사용 중 온도가 280℃까지 상승하는 전력반도체용 파워모듈에 안정적으로 적용이 가능하다. 칩과 기판에 ENIG(electroless nickel-immersion gold) 표면처리를 적용한 결과 접합부에 Ni₃Sn₄/FeSn₂/Ni₃Sn₄의 다층 금속간화합물 구조를 형성하였으며 전단시험시 파괴경로는 Ni₃Sn₄/FeSn₂ 계면에서 균열이 진전하다가 FeSn₂ 내부로 전파되는 양상을 보였다. TLP 접합공정 2시간 이후에는 30 MPa 이상의 전단강도를 얻었고 특히 200℃ 전단시험에서도 강도 저하가 전혀 없었다. 본 연구결과는 최근 활발히 연구되고 있는 전기자동차용 파워모듈에 적용할 수 있는 소재 및 공정으로 기대할 수 있다.

• 한국표면공학회지
• /
• 제48권4호
• /
• pp.149-157
• /
• 2015

We investigated the effects of the fabric structure or the kinds of plated metals on the electromagnetic interference shielding effectiveness (EMI SE) by means of electroless plating on polyester fabric. We found that the weight of deposited metal, EMI SE, and flexibility of the conductive fabric for EMI shield is affected by morphology of fabric and structure of fiber. The EMI SE of conductive fabric plated Ni/Cu/Ni by electroless plating method on draw textured yarn (DTY) polyester was in the practically useful range of above 70 dB over a wide frequency range of 10 MHz to 1.0 GHz at the surface resistivity of $0.05{\Omega}/{\square}$. Au or Ag plated conductive fabric by immersion plating method is not able to provide for a good EMI SE.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.178-178
• /
• 2016

Every display is equipped with a cover glass to protect the underneath displaying devices from mechanical and environmental impact during its use. The strengthened glass such as Gorilla glass.$^{TM}$ has been exclusively adopted as a cover glass in many displays. Conventionally, the strengthened glass has been manufactured via ion-exchange process in wet salt bath at high temperature of around $500^{\circ}C$ for hours of treatment time. During ion-exchange process, Na ions with smaller diameter are substituted with larger-diameter K ions, resulting in high compressive stress in near-surface region and making the treated glass very resistant to scratch or impact during its use. In this study, PIIID (plasma immersion ion implantation and deposition) technique was used to implant metal ions into the glass surface for strengthening. In addition, due to the plasmonic effect of the implanted metal ions, the metal-ion implanted glass samples got colored. To implant metal ions, plasma immersion ion implantation technique combined with HiPIMS method was adopted. The HiPIMS pulse voltage of up to 1.4 kV was applied to the 3" magnetron sputtering targets (Cu, Ag, Au, Al). At the same time, the sample stage with glass samples was synchronously pulse-biased via -50 kV high voltage pulse modulator. The frequency and pulse width of 100 Hz and 15 usec, respectively, were used during metal ion implantation. In addition, nitrogen ions were implanted to study the strengthening effect of gas ion implantation. The mechanical and optical properties of implanted glass samples were investigated using micro-hardness tester and UV-Vis spectrometer. The implanted ion distribution and the chemical states along depth was studied with XPS (X-ray photo-electron spectroscopy). A cross-sectional TEM study was also conducted to investigate the nature of implanted metal ions. The ion-implanted glass samples showed increased hardness of ~1.5 times at short implantation times. However, with increasing the implantation time, the surface hardness was decreased due to the accumulation of implantation damage.

• 센서학회지
• /
• 제3권1호
• /
• pp.61-67
• /
• 1994

R형 열전대의 열기전력에 미치는 열처리효과에 대하여 살펴보기 위하여 알루미늄 및 은 금속 응고점 셀에서 깊이에 따른 열기전력의 변화를 조사하였다. 사용전 열처리 방법에 따라 최대기전력 차이는 $660.323^{\circ}C$ 에서 $17.1{\mu}V$, $961.78^{\circ}C$ 에서 $18.1{\mu}V$ 를 보였다. 또한 충분한 열처리를 거치지 않은 열전대는 동일한 온도로 유지되고 있는 응고점 셀내에서도 삽입깊이에 따라 기전력 차이를 나타냈으며, 그 정도는 알루미늄 응고점에서 최대 $7.8{\mu}V$은 응고점에서 $18.9{\mu}V$를 보였다. 따라서 열전대를 사용하여 정확한 온도를 측정하기 위해서는 충분한 열처리를 거쳐야 함을 알 수 있었으며, 본 논문에서 얻어진 실험결과를 바탕으로 R형 열전대의 열처리방법을 제시하였다.

• 대한금속재료학회지
• /
• 제48권11호
• /
• pp.1041-1046
• /
• 2010

The reactions between a Sn-3.0Ag-0.5Cu solder alloy and electroless Ni/electroless Pd/immersion Au (ENEPIG) surface finishes with various Pd layer thicknesses (0, 0.05, 0.1, 0.2, $0.4{\mu}m$) were examined for the effect of the Pd layer on the massive spalling of the $(Cu,Ni)_6Sn_5$ layer during reflow at $235^{\circ}C$. The thin layer deposition of an electroless Pd (EP) between the electroless Ni ($7{\mu}m$) and immersion Au ($0.06{\mu}m$) plating on the Cu substrate significantly retarded the massive spalling of the $(Cu,Ni)_6Sn_5$ layer during reflow. Its retarding effect increased with an increasing EP layer thickness. When the EP layer was thin (${\leq}0.1{\mu}m$), the retardation of the massive spalling was attributed to a reduced growth rate of the $(Cu,Ni)_6Sn_5$ layer and thus to a lowered consumption rate of Cu in the bulk solder during reflow. However, when the EP layer was thick (${\geq}0.2{\mu}m$), the initially dissolved Pd atoms in the molten solder resettled as $(Pd,Ni)Sn_4$ precipitates near the solder/$(Cu,Ni)_6Sn_5$ interface with an increasing reflow time. Since the Pd resettlement requires a continuous Ni supply across the $(Cu,Ni)_6Sn_5$ layer from the Ni(P) substrate, it suppressed the formation of $(Ni,Cu)_3Sn_4$ at the $(Cu,Ni)_6Sn_5/Ni(P)$ interface and retarded the massive spalling of the $(Cu,Ni)_6Sn_5$ layer.

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.71-77
• /
• 2012

We studied the effect of heat treatment on the microstructures and mechanical strength of the solder joints in the Light Emitting Diode (LED) packages. The commercial LED packages were mounted on the a flame resistance-4 (FR4) Printed Circuit Board (PCB) in the reflow process, and then the joints were aged at $125^{\circ}C$ for 100, 200, 300, 500 and 1000 hours, respectively. After the heat treatment, we measured the shear strength of the solder joints between the PCB and the LED packages to evaluate their mechanical property. We used Pb-free Sn-3.0Ag-0.5Cu solder to bond between the LED packages and the PCBs using two different surface finishes, Electroless Nickel-Immersion Gold (ENIG) and Electroless Nickel-Electroless Palladium-Immersion Gold (ENEPIG). The microstructure of the solder joints was observed by a scanning electron microscope (SEM). (Cu,Ni)6Sn5 intermetallic compounds (IMCs) formed between the solder and the PCB, and the thickness of the IMCs was increased with increasing aging time. The shear strength for the ENIG finished LED package increased until aging for 300 h and then decreased with increasing aging time. On the other hand, in the case of an ENEPIG finished LED package, the shear strength decreased after aging for 500 h.

• The Journal of Advanced Prosthodontics
• /
• 제11권4호
• /
• pp.215-222
• /
• 2019

PURPOSE. To evaluate the polishing effect on roughness and color change of pressed and layering ceramics after immersion in coffee solution. MATERIALS AND METHODS. 88 ceramic discs ($1.0mm{\times}10.0mm$) were manufactured - 44 nano-fluorapatite layering ceramics (IPS e.max Ceram. Group C) and 44 pressed lithium disilicate ceramic discs (IPS e. max Press - Group P). Each group was divided into 4 subgroups according to surface treatments: (G) Glaze, (S) Shofu polishing system (Shofu Inc.), (E) Edenta AG polishing System, (KG) $30-{\mu}m$ diamond granulation tip. Surface roughness (Ra) and color change (${\Delta}E$) measurings after the surface treatments were performed, before and 12 days after the immersion in coffee solution. A samples' qualitative analysis was conducted with a scanning electron microscopy (SEM). Data were statistically-treated with one-way-ANOVA and Duncan's tests, apart from paired t-test and Pearson's correlation test (${\alpha}=5%$). RESULTS. The decrescent order, both for surface roughness (Ra) and ${\Delta}E$ for both ceramics were: KG > E > S > G (P<.05). With exception for PG and CG subgroups, which did not present statistical difference between them, all other pressed ceramics subgroups presented smaller Ra values and greater ${\Delta}E$ values than the layering ceramics subgroups (P<.05). CONCLUSION. Although mechanical polishing systems presented intermediate Ra values, their colors were considered clinically acceptable. There is a strong correlation between the surface roughness and the color change of tested ceramics.

• 마이크로전자및패키징학회지
• /
• 제21권3호
• /
• pp.43-50
• /
• 2014

전자 제품의 경박 단소화 및 고집적화가 이루어 지면서 실리콘 집과 인쇄회로기판의 인터커넥션의 고신뢰도가 요구되고 있다. 본 연구는 Sn-4.0wt%Ag-0.5wt%Cu (SAC405) 솔더와 다양한 무전해 Ni-P 도금 두께에서의 high speed shear 에너지 및 파괴 모드를 연구하였다. 파괴 모드 분석을 위하여 집속이온빔(FIB) 분석이 이용되었다. 질산 기상 처리하지 않은 $1{\mu}m$ Ni-P 시편에서 낮은 shear 에너지가 나왔으며, 이는 솔더레지스트 선단에서 파단의 원인을 제공하는 것이 확인되었다. 질산 기상 처리한 시편에서 무전해 Ni-P 도금 두께가 커질수록 취성 파괴 모드는 감소한다. 또 Ni-P 도금 두께와 표면 거칠기(Ra)는 반비례 관계를 가진다. 이는 Ni-P 도금의 표면 거칠기를 낮추면 SAC405 솔더 조인트의 신뢰도를 향상시킨다는 사실을 나타낸다.

• 한국표면공학회지
• /
• 제50권3호
• /
• pp.147-154
• /
• 2017

This research was conducted to investigate the electrochemical properties of the thin air-formed oxide film-covered AZ31 Mg alloy. Native air-formed oxide films on AZ31 Mg alloy samples were prepared by knife-abrading method and the changes in the electrochemical properties of the air-formed oxide film were investigated in seven different electrolytes containing the following anions $Cl^-$, $F^-$, $SO{_4}^{2-}$, $NO_3{^-}$, $CH_3COO^-$, $CO{_3}^{2-}$, and $PO{_4}^{3-}$. It was observed from open circuit potential (OCP) transients that the potential initially decreased before gradually increasing again in the solutions containing only $CO{_3}^{2-}$ or $PO{_4}^{3-}$ ions, indicating the dissolution or transformation of the native air-formed oxide film into new more protective surface films. The Nyquist plots obtained from electrochemical impedance spectroscopy (EIS) showed that there was growth of new surface films with immersion time on the air-formed oxide film-covered specimens in all the electrolyte. The least resistive surface films were formed in fluoride and sulphate baths whereas the most protective film was formed in phosphate bath. The potentiodynamic polarization curves illustrated that passive behaviour of AZ31 Mg alloy under anodic polarization appears only in $CO{_3}^{2-}$, or $PO{_4}^{3-}$ ions containing solutions and at more than $-0.4V_{Ag/AgCl}$ in $F^-$ ion containing solution.