• 멤브레인
• /
• 제27권6호
• /
• pp.528-535
• /
• 2017

본 연구에서는 폴리페닐렌옥사이드 고분자에 브롬화반응을 통해서 할로겐 원소를 수월하게 도입하고, 도입한 할로겐 원소를 이미다졸륨으로 치환하여 이미다졸륨이 도입된폴리페닐렌옥사이드를 합성하였다. 다양한 특성평가를 통해서 합성이 이루어졌음을 확인하였고, 산소, 질소, 이산화탄소 기체투과 특성평가를 진행하여 합성한 고분자의 기체특성을 확인하였다. 이미다졸륨의 함량이 증가할수록 합성고분자의 이온교환용량이 증가하였으나, 기계적 강도는 감소하였다. 특히, 기체투과도는 미세하지만 감소하는 경향을 나타내었으며, 이산화탄소/질소 선택도의 경우 이미다졸륨 함량이 높아질수록 증가하는 경향을 확인할 수 있었다.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.337-344
• /
• 2014

이 논문은 온도차에 따라 변화되는 이온성 액체와 낮은 밴드갭을 갖는 고분자인 poly(2-heptadecyl-4-vinylthieno[3,4-d]thiazole)(PHVTT) 간의 상호작용 및 고분자의 거동을 조사하였다. 이온성 액체는 methyl imidazolium chloride([MIM]Cl), butyl methyl imidazolium chloride([BMIM]Cl), tri-butyl methyl ammonium methyl sulfate([TBMA][ $MeSO_4$])를 사용하였으며, 21, 28, 32, $37^{\circ}C$로 온도를 변화시키며 상호작용의 변화를 UV-vis spectroscopy, FT-IR spectroscopy, photoluminescence spectroscopy를 통해 확인한 결과 이온성 액체인 [MIM]Cl, [TBMA][$MeSO_4$]와 PHVTT의 상호작용은 점차 약해짐을 확인할 수 있었지만, [BMIM]Cl은 온도 변화에 따른 상호작용의 변화를 보이지 않았다.

• 전기화학회지
• /
• 제13권3호
• /
• pp.198-202
• /
• 2010

Lithium co-polyelectrolyte-ionic liquid systems, using poly (lithium 2-acrylamido-2-methyl propanesulfonate; PAMPSLi) and polyvinyl formamid (PVF) were prepared and their electrochemical and physical properties were measured. The conductivity of co-polymer systems, PAMPSLi/PVF/N, N-dimethyl-N-propyl-N-butylammonium tricyanomethanide (PAMPSLi/PVF/$N_{1134}$TCM) and PAMPSLi/PVF/N, N-dimethyl-N-propyl-N-butylammonium dicyanamide (PAMPSLi/PVF/$N_{1134}$DCA) exhibited low viscosity ($N_{1134}$TCM:$N_{1134}$DCA 28.6cP, 28.7cP) and higher conductivity ($2.48{\times}10^{-3}Scm^{-1}$, $2.2{\times}10^{-3}Scm^{-1}$) than homopolymer system. The ionic conductivity PAMPSLi/PVF/1-ethyl-3-methyl imidazolium dicyanamide (PAMPSLi/PVF/emImDCA) exhibited $1.54{\times}10^{-3}Scm^{-1}$ and low viscosity (emImDCA: 28.09cP). High flexibility of imidazolium cation and dissociation of lithium cation from the co-polymer chains were affected by high conductivity and low viscosity.

• 멤브레인
• /
• 제25권2호
• /
• pp.152-161
• /
• 2015

본 연구에서는 이온교환막을 이용한 전기화학적 수처리 공정의 효율을 향상시키기 위해 낮은 전기적 저항, 높은 이온선택 투과성, 및 농도분극 조건에서 낮은 물분해 플럭스 특성을 갖는 새로운 세공충진 음이온 교환막을 개발하였다. 다공성 폴리올레핀 기재에 이온교환능이 우수한 4급 암모늄기를 포함한 공중합 고분자를 충진하여 상용막 이상의 성능을 갖는 기저 멤브레인을 제조하였다. 또한 기저 막 표면에 이미다졸륨 고분자를 코팅하여 전기화학적 성능을 유지하며 동시에 물분해 플럭스를 효과적으로 제어할 수 있음을 확인하였다. 제조된 세공충진 음이온 교환막은 상용막 대비 약 1/6~1/8 수준의 매우 낮은 전기적 저항을 나타내었으며 동시에 농도분극 조건에서 양이온 교환막 수준의 낮은 물분해 플럭스를 나타내었다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2010년도 춘계학술 발표회
• /
• pp.199-199
• /
• 2010

Polymeric membranes have been widely used to separate gas mixtures, such as $O_2/N_2,\;CO_2/CH_4,\;CO_2/N_2$, and olefin/paraffin. The permeation selectivity is the ratio between composition ratio at the permeate side and composition ratio at the feed side. In addition, the permeation selectivity is a product of solubility selectivity and diffusivity selectivity. We present a novel idea and describe its experimental result, which was achieved by preparing polymer gel films that included a room temperature ionic liquid (RTIL) in a polymer matrix. It is known that $CO_2$ can dissolve easily in imidazolium-based RTILs. We prepared polymer-ionic liquid gel films using an ionic liquid, 1-ethyl-3-methylimidazolium acetate ([emim] acetate, C-tri) and a host polymer, poly (vinyl acetate) (PVAc, Aldrich).

• 한국응용과학기술학회지
• /
• 제30권3호
• /
• pp.461-471
• /
• 2013

Use of low bandgap polymers is the most suitable way to harvest a broader spectrum of solar radiations for solar cells. But, still there is lack of most efficient low bandgap polymer. In order to solve this problem, we have synthesised a new low bandgap polymer and investigated its interaction with the ILs to enhance its conductivity. ILs may undergo almost unlimited structural variations; these structural variations have attracted extensive attention in polymer studies. In addition to this, UV-Vis spectroscopy, confocal Raman spectroscopy and FT-IR spectroscopy results have revealed that all studied ILs (tributylmethylammonium methyl sulfate [$N_{1444}$][$MeSO_4$] from ammonium family) and 1-methylimidazolium chloride ([MIM]Cl, and 1-butyl-3-methylimidazolium chloride [Bmim]Cl from imidazolium family) has potential to interact with polymer. Further, protic ILs shows enhanced conductivity than aprotic ILs with low bandgap polymer. This study provides the combined effect of low bandgap polymer and ILs that may generate many theoretical and experimental opportunities.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.40-43
• /
• 2008

High temperature polymer electrolyte membranes incorporating ionic liquids (ILs) in different polymers such as commercial fluorinated polymers, sulfonated polymers and recasted nafion have been developed. ILs based on imidazolium cation and different anions possess high ionic conductivity and good thermal stability and have been used in the present study. The membranes containing IL show conductivity ${\sim}10^{-2}S\;cm^{-1}$ above $100^{\circ}C$ under anhydrous conditions and are thermally stable up to $250-300^{\circ}C$. IL acts as a conducting medium in these electrolytes and plays the same role as played by water in fully hydrated nafion membranes. Due to high conductivity and good thermal stability, these membranes are promising materials for PEFCs at higher temperatures under anhydrous conditions.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.257-264
• /
• 2017

A polymeric ionic liquid, poly(1-methyl 3-(2-acryloyloxypropyl) imidazolium iodide) (PMAPII), was synthesized as a single-iodide-ion-conducting polymer and employed in a gel polymer electrolyte. Gel polymer electrolytes prepared from iodine, 4-tert-butylpyridine, ${\gamma}$-butyrolactone, and PMAPII were applied in quasi-solid-state dye-sensitized solar cells (DSSCs). The addition of 16 wt.% PMAPII provided the most favorable environment, striking a compromise between the iodide ion concentration and the ionic mobility, which resulted in the highest conversion efficiency of the resulting DSSCs. The quasi-solid-state DSSC assembled with the optimized gel polymer electrolyte exhibited a relatively high conversion efficiency of 7.67% under AM 1.5 illumination at $100mA\;cm^{-2}$ and better stability than that of the DSSC with a liquid electrolyte.

• 전기화학회지
• /
• 제12권3호
• /
• pp.271-275
• /
• 2009

Five novel lithium polyelectrolyte-ionic liquid systems, using poly (lithium 2-acrylamido-2-methyl propanesulfonate; PAMPSLi) were prepared and their electrochemical properties were measured. The ionic conductivity of the PAMPSLi/1-ethyl-3-methylimidazolium tricyano methanide (emImTCM) system was exhibited high conductivity (1.28 $\times$ $10^{-3}$ $S/cm^{-1}$). The high conductivity and low viscosity of PAMPSLi/emImTCM system is due to the high flexibility of imidazolium cation and dissociation of lithium cation from the polymer chains. The PAMPSLi/N,N-dimethyl-N-propyl-Nbutylammonium tricyanomethanide ($N_{1134}TCM$) and PAMPSLi/N, N-dimethyl-N-propyl-N-butylammonium dicyanamide ($N_{1134}DCA$) systems showed fairly high conductivity (6.3 $\times$ $10^{-4}$ $S/cm^{-1}$, 6.0 $\times$ 10.4 S/cm.1). PAMPSLi/Trihexyl (tetradecyl) phosphonium bis (trifluoromethane sulfonyl) amide ($P_{66614}TFSA$) exhibited low conductivity (2.22 $\times$ $10^{-5}$ $Scm^{-1}$) and thermally stable over 400$^{\circ}C$.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.424-428
• /
• 2008

We prepared an ionic gel polymer electrolyte for dye-sensitized solar cells (DSSCs) without leakage problem. Triiodide compound (BTDI) was synthesized by the reaction of benzene tricarbonyl trichloride with diethylene glycol monotosylate and subsequent substitution of tosylate by iodide using NaI. Bisimidazole was prepared by the reaction of imidazole with the triethylene glycol ditosylate under strongly basic condition provided by NaH. BTDI and bisimidazole dissolved in an ionic liquid were injected into the cells and permeated into the $TiO_2$ nanopores. In situ crosslinking was then carried out by heating to form a network structure of poly(imidazolium iodide), thereby converting the ionic liquid electrolytes to a gel or a quasi-solid state. A monomer (BTDI and bisimidazole) concentration in the electrolytes of as low as 30 wt% was sufficient to form a stable gel type electrolyte. The DSSCs based on the gel polymer electrolytes showed a power conversion efficiency of as high as 1.15% with a short circuit current density of $5.69\;mAcm^{-2}$, an open circuit voltage of 0.525 V, and a fill factor of 0.43.