• Current Optics and Photonics
• /
• 제1권6호
• /
• pp.598-603
• /
• 2017

Traditional three-dimensional (3-D) laser imaging systems are based on real aperture imaging technology, whose resolution decreases as the range increases. In this paper, we develop a novel 3-D imaging technique based on the synthetic aperture technology in which the imaging resolution is significantly improved and does not degrade with the increase of the range. We consider an imaging laser radar (ladar) system using the floodlight transmitting mode and multi-beam receiving mode. High 3-D imaging resolutions are achieved by matched filtering the linear frequency modulated (LFM) signals respectively in range, synthetic aperture along-track, and the real aperture across-track. In this paper, a novel 3-D imaging signal model is given first. Because of the motion during the transmission of a sweep, the Doppler shift induced by the continuous motion is taken into account. And then, a proper algorithm for the 3-D imaging geometry is given. Finally, simulation results validate the effectiveness of the proposed technique.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.982-983
• /
• 2017

본 연구는 최근 문제가 되고 있는 비알콜성 간 질환에 대한 빅 데이터의 사전 데이터를 만들기 위해 마우스에서 고지방 식이와 Streptozotocin ((STZ)로 모델을 제작하였고, 당뇨와 비만 정도를 측정하여 질환발생 정도를 확인하였다. 또한, MR영상의 지속적인 촬용으로 질환발생과정에 대해 3D분석 소프트웨어로 평가되었다.

• 치과방사선
• /
• 제29권2호
• /
• pp.387-396
• /
• 1999

In dentistry. RadioVisioGraphy was introduced as a first electronic dental x-ray imaging modality in 1989. Thereafter. many types of direct digital radiographic system have been produced in the last decade. They are based either on charge-coupled device(CCD) or on storage phosphor technology. In addition. new types of digital radiographic system using amorphous selenium. image intensifier etc. are under development. Advantages of digital radiographic system are elimination of chemical processing, reduction in radiation dose. image processing, computer storage. electronic transfer of images and so on. Image processing includes image enhancement. image reconstruction. digital subtraction, etc. Especially digital subtraction and reconstruction can be applied in many aspects of clinical practice and research. Electronic transfer of images enables filmless dental hospital and teleradiology/teledentistry system. Since the first image management and communications system(IMACS) for dentomaxillofacial radiology was reported in 1992. IMACS in dental hospital has been increasing. Meanwhile. researches about computer-assisted diagnosis, such as structural analysis of bone trabecular patterns of mandible. feature extraction, automated identification of normal landmarks on cephalometric radiograph and automated image analysis for caries or periodontitis. have been performed actively in the last decade. Further developments in digital radiographic imaging modalities. image transmission system. imaging processing and automated analysis software will change the traditional clinical dental practice in the 21st century.

• Journal of Astronomy and Space Sciences
• /
• 제20권4호
• /
• pp.403-416
• /
• 2003

There are common features, in both imaging surveys and image processing, between astronomical observations and remote sensing. Handling large amounts of data, in an easy and fast way, has become a common issue. Implementing pipeline software can be a solution to the problem, one which allows the processing of various kinds of data automatically. As a case study, the development of pipeline software for the EIS (European Southern Observatory Imaging Survey) is introduced. The EIS team has been conducting a sky survey to provide candidate targets to the 250 VLTs (Very Large Telescopes) observations. The survey data have been processed in a sequence of five major data corrections and reductions, i.e. preprocessing, flat fielding, photometric and astrometric corrections, source extraction, and coaddition. The processed data are eventually distributed to the users. In order to provide automatic processing of the vast volume of observed data, pipeline software has been developed. Because of the complexity of objects and different characteristic of each process, it was necessary to analyze the whole works of the EIS survey program. The overall tasks of the EIS are identified, and the scheme of the EIS pipeline software is defined. The system structure and the processes are presented, and in-depth flow charts are analyzed. During the analyses, it was revealed that handling the data flow and managing the database are important for the data processing. These analyses may also be applied to many other fields which require image processing.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권2호
• /
• pp.41-51
• /
• 2014

This paper describes a method to estimate the noise power using the minimum statistics approach, which was originally proposed for audio processing. The proposed minimum statistics-based method separates a noisy image into multiple frequency bands using the three-level discrete wavelet transform. By assuming that the output of the high-pass filter contains both signal detail and noise, the proposed algorithm extracts the region of pure noise from the high frequency band using an appropriate threshold. The region of pure noise, which is free from the signal detail part and the DC component, is well suited for minimum statistics condition, where the noise power can be extracted easily. The proposed algorithm reduces the computational load significantly through the use of a simple processing architecture without iteration with an estimation accuracy greater than 90% for strong noise at 0 to 40dB SNR of the input image. Furthermore, the well restored image can be obtained using the estimated noise power information in parametric image restoration algorithms, such as the classical parametric Wiener or ForWaRD image restoration filters. The experimental results show that the proposed algorithm can estimate the noise power accurately, and is particularly suitable for fast, low-cost image restoration or enhancement applications.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권6호
• /
• pp.391-402
• /
• 2015

In this paper, we present implementation of backward movement control of truck-trailer vehicles using a fuzzy mode-based control scheme considering practical constraints and computational overhead. We propose a fuzzy feedback controller where output is predicted with the delay of a unit sampling period. Analysis and design of the proposed controller is very easy, because it is synchronized with sampling time. Stability analysis is also possible when quantization exists in the implementation of fuzzy control architectures, and we show that if the trivial solution of the fuzzy control system without quantization is asymptotically stable, then the solutions of the fuzzy control system with quantization are uniformly ultimately bounded. Experimental results using a toy truck show that the proposed control system outperforms a conventional system.

• 비파괴검사학회지
• /
• 제20권6호
• /
• pp.521-537
• /
• 2000

초음파 영상은 의료진단을 위한 영상기기 중 가장 널리 쓰이고 있는 방법으로 전자공학에 있어서 DSP 및 VLSI 분야의 기술발전에 힘입어 보다 효율적이고 복잡한 기법들의 적용이 가능하여져 90년대에 이르러 시스템의 성능이 매우 빠르게 발달되었다. 본 논문은 의료진단용 초음파 영상장치에서 사용되는 주요 디지털 신호처리 기법과 시스템 구현 기술에 대하여 기술하였다. 구체적으로는 일반적인 초음파 영상장치의 구조 및 신호처리 기법을 소개하고, 90년대에 개발된 디지털 초음파 영상장치의 기술적인 내용을 그 기술 동향과 전망과 함께 다루었다. 특히 초음파 영상의 화질을 결정하는 가장 중요한 요소인 해상도를 증대하기 위한 모든 초음파 집속 기법을 표현할 수 있는 통합 합성 구경 모형을 제시하고, 이론적인 해석을 통하여 초음파 영상을 위한 어레이 신호처리 기법들을 구분하고 각 방법들에 대한 특성을 조사하였나. 본 논문에서 소개된 신호처리 기법들은 초음파를 이용한 비파괴 검사 분야에 유용하게 적용될 수 있는 것 들이다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 추계학술발표논문집 (하)
• /
• pp.859-862
• /
• 2000

본 논문에서는 기존의 TV 시스템에서 사용하는 영상신호의 encoding/decoding 방법과 새롭게 제안되는 constant luminance encoding/decoding 방법을 컴퓨터로 구현하고, 기존의 방법과 제안된 방법으로 재생된 영상의 칼라 정보의 차이에 대한 데이터를 제시한다. 또한 디지털 방송에 적합한 encoding/decoding 시스템의 선택에 대한 고찰도 포함한다.

• Journal of the Korean Data and Information Science Society
• /
• 제15권3호
• /
• pp.695-706
• /
• 2004

The use of wavelets in three-dimensional imaging is reviewed with an example. The insufficiencies of direct two-dimensional processing is showed as a major motivating factor behind using wavelets for three-dimensional imaging. Different wavelet algorithms are used, and these are compared with the direct two-dimensional approach as well as with each other.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.355-356
• /
• 2006

The glass transition behavior of OLED materials is very important for both processing and lifetime. We report about the correlation between the structure of selected small molecule Hole Transport Materials (HTM's) and their glass transition temperature. The thermal stability of devices manufactured with them was investigated. The results give researchers and engineers some information which are helpful for designing new molecules and processing them in device making.