• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.36-40
• /
• 2018

In this study, the electromechanical properties in Sn-Cu double layer stabilized GdBCO coated conductor (CC) tapes with and without external lamination under uniaxial tension were examined at 77 K and self-field. Their irreversible stress and strain limits were determined using a loading-unloading scheme based on different critical current ($I_c$) recovery criteria. The repeated tests were performed and statistical estimation was done to check the reproducibility depending on the criterion adopted in evaluating the electromechanical properties. From the results, it showed that the Sn-Cu double-layer stabilized CC tapes have the higher irreversible stress limit, but lower irreversible strain limit as compared to brass laminated ones. Through the repeated tests, it can be found that a small scattering of irreversible limits existed in both CC tape samples. Finally, similar strain sensitivity of $I_c$ in both CC tapes was obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.452-455
• /
• 2000

Superconducting power cable is one of the most promising energy application of high-T$_{c}$ superconductors (HTS). A prototype HTS cable have been constructed multi-layer cable using Bi-2223 tape and tested. The AC transport losses under self field were investigated at 77K on the 19 filamentary tape and multi-layer HTS cables. And we carried out numerical analysis using bean model. The result shows that the total transport current of HTS cable in L$N_2$ was 475[A], and transport current passed through almost the outer layer (2-layer). Also, AC transport losses in outer layer of HTS cable was proportion to I$^2$ and higher than losses of inner layer. In case of Ip=Ic, calculated numerical loss density was concentrated on the edge of tape and most of loss density in cable was distributed outer layer more than inner layer. As magnetic distribution was concentrated on outer layer.r.

• 한국진공학회지
• /
• 제20권1호
• /
• pp.50-56
• /
• 2011

본 논문에서는 버퍼막 두께 및 열처리 온도에 따른 ZnO/b-ZnO/p-Si(111) 기반 이종접합 다이오드 전류 특성에 대한 연구가 진행되었고, b-ZnO (ZnO buffer layer) 버퍼막 두께 및 열처리 온도에 따른 p-Si(111) 기판 위에 증착시킨 ZnO 박막의 구조적, 전기적 특성 또한 연구되었다. X-ray diffraction (XRD) 방법을 이용하여 ZnO 박막의 구조적 특성을 측정하였고, semiconductor parameter analyzer를 이용하여 ZnO/b-ZnO/p-Si(111) 이종접합 다이오드의 I-V 특성을 평가하였다. XRD 분석 결과 버퍼막 열처리 온도 $700^{\circ}C$, 버퍼막 두께 70 nm에서 ZnO 박막은 우세한 (002) 방향의 c-축 배향성을 갖는 육방정계(hexagonal wurtize) 결정 구조를 나타내었다. 전기적 특성인 운반자 농도, 비저항 값의 경우에는 버퍼막 열처리 온도 $700^{\circ}C$, 버퍼막 두께 50 nm에서 우수한 전기적 특성(비저항: $2.58{\times}10^{-4}[{\Omega}-cm]$, 운반자 농도: $1.16{\times}10^{20}[cm^{-3}]$)을 보였다. 또한 ZnO/b-ZnO/p-Si(111) 이종접합 다이오드의 전류 특성은 버퍼막 열처리 온도 $700^{\circ}C$에서 버퍼막 두께가 증가할수록 전류 특성이 향상되는 경향을 보였다.

• 한국농림기상학회지
• /
• 제13권2호
• /
• pp.87-92
• /
• 2011

본 연구에서는 광릉 활엽수림의 수문순환과정에서 낙엽층의 역할을 이해하기 위해 낙엽층의 차단저류능을 산정하였다. 낙엽층 두께의 공간 분포를 조사하여 낙엽층 두께 지도를 작성하였으며, 낙엽층의 두께와 차단저류능 간의 관계를 확인하고자 낙엽 표본을 채집하여 실험을 수행하였다. 25~100mm 두께의 낙엽 표본에 대한 실험 결과, 둘 간에 선형 비례 관계가 존재함을 확인하였다. 낙엽층의 응집이 상대적으로 적은 0~25mm 두께에서는 낙엽층 두께의 증가에 따라 더 급격한 차단저류능 증가가 일어나는 비선형적인 관계를 보였다. 또한 강우 강도가 약한 경우에도 낙엽층 두께와 차단저류능 간의 비선형 관계가 더 크게 나타날 수 있음을 확인하였다. 제작된 낙엽층 두께 지도와 낙엽층 두께와 차단저류능 사이의 관계식을 통하여 산정한 낙엽층의 차단저류능은 평균 $0.94{\pm}0.39mm$ 이었다. 산정된 낙엽층(평균 두께 $59{\pm}32mm$)의 차단저류능은 군락의 차단저류능과 비교할 때 그 크기가 비슷하였으며, 이는 낙엽층이 광릉 활엽수림의 수문순환에 중요한 역할을 할 수 있음을 보여준다.

• 한국광물학회지
• /
• 제10권2호
• /
• pp.97-104
• /
• 1997

Based on the method of determination for relative stability of each phase from the difference among the interaction parameters of the phases consisting the mixed layer, the types of interactions between layers were specified and interaction parameter between layers in ordered domain was analytically derived as a function parameter between layers in ordered domain was analytically derived as a function of not only temperature and mole fraction of layers but also ordering parameter. Interaction parameter between the different layers in ordered phase, L is as follows:{{{{ {L }_{1 } (X,Q,T)= { C} over { Q} -4(1-2Q) { L}^{2 } - { RT} over {2} ln { 1} over {2 } - { 2RT} over { { X}_{ s} } ln { { 4QX}`_{s } ^{2 } } over {(1- { X}_{s }- { QX}_{s })( { X}_{s }- {QX }_{s } ) } }}}}L2 is the interaction parameter between ordered and disordered phase in domain and is the mole fraction of the domain which represent the infinite length of mixed layer mineral and Q and C are the reaction progress parameter and arbitrary constant, respectively. This equation was used for the I/S mixed layer clay minerals to infer the relative stability of R1 type I/S mixed layer in the temperature range from 373K to 450K. The result of calculation suggest that, owing to the decrease in interaction parameter with increasing temperature. The interaction parameter decreases more rapidly with decreasing mole fraction of smectite in domain, which is consistent with the fact that the probability of finding the series smectite layer is lo in the domain with small mole fraction of smectite layers in natural system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1505-1506
• /
• 2011

염료감응형 태양전지(Dye-Sensitized Solar Cell, DSSC)의 FTO 표면에 compact layer를 형성시켜 직접적인 마찰에 의한 전자의 재결합을 줄일 수 있다. 따라서 광전극에서의 compact layer의 효과를 최대화하기 위하여 $TiCl_4$ 용액에 acetic acid를 첨가하여 특성변화를 측정하였다. UV-Vis 분광기, I-V 특성곡선, EIS 분석장비를 이용하여 검토한 결과, UV-Vis 분광분석을 통해서 acetic acid를 첨가한 compact layer의 투과도가 현저하게 높아진 것을 확인하였다. 이 결과는 $TiCl_4$ 처리에 의하여 compact layer를 구성하고 있는 $TiO_2$ 입자의 응집현상이 개선되므로 표면특성이 향상되었기 때문이다. Acetic acid를 첨가한 compact layer가 입자응집으로 인한 표면저항의 감소를 유발하여, 전자의 이동이 원활해진 것을 내부 임피던스 분석을 통하여 확인하였다. Compact layer에 의해 재결합이 감소하여 효율이 향상된 것을 I-V 특성곡선을 분석하여 확인하였다.

• 대한기계학회논문집
• /
• 제9권4호
• /
• pp.403-413
• /
• 1985

본 논문에서는 수직벽 하류에 형성되는 박이 전단층의 발전과 재부착 그리고 재발전 경계층에 대해 평균 속도, 벽면의 압력 분포, 난류 강도, 레이놀즈 전단 압력 및 아직 수직벽에 대해서는 보고된바 없는 난류 떨림 속도 성분들의 3승곱 통계치를 측정하여 난류 구조의 변화를 분석하고 이를 수치적 계산 모델개발의 자 료로 제공하고자 함이 이 연구의 목적이다.

• Journal of Biosystems Engineering
• /
• 제22권1호
• /
• pp.11-20
• /
• 1997

Thin layer drying tests of short gain rough rice were conducted in an experimental dryer equiped with air conditioning unit. The drying tests were performed in triplicate at three air temperatures of $35^circ$, $45^circ$, $55^circ$, and three relative humidities of 40%, 55%, 70%, respectively. Previously published thin layer equations were reviewed and four different models widely used as thin layer drying equations for cereal grains were selected. The selected four models were Pages, simplified diffusion, Lewis's and Thompson's models. Experimental data were fitted to these equations using stepwise multiple regression analysis. The experimental constants involved in tow equations were represented as a function of temperature and relative humidity of drying air. The results of comparing coefficients of determination and root mean square errors of miosture ratio for low equations showed that Page's and Thompsons models were found to fit adequately to all drying test data with coefficient of determination of 0.99 or better and root mean square error of moisture ratio of 0.025.

• 해양환경안전학회지
• /
• 제3권1호
• /
• pp.99-109
• /
• 1997

The in situ observations and the seawater analyses were conducted in July and August, 1996 for the purpose of describing the characteristics of organic pollution, dissolved oxygen distributions, and the evaluation of water quality in Mokpo harbour. The vertical density distribution of water column was found to be in stable structure with higher water temperature and lower salinity on surface layer at ebb tide in summer. In July, dissolved oxygen was shown to be oversaturated on surface and bottom layers, while in August, which was shown to be oversaturated on surface layer, and to be unsaturated on bottom layer as 68∼93% of saturation percentage. Dissolved oxygen of bottom layer in August was evaluated to be under the regular grades, based on Korean standards of seawater quality. In view of COD, the seawater quality of Mokpo harbour in summer was evaluated to be deteriorated due to organic wastes and graded to be the third class, and TSS of Mokpo harbour in summer was graded to be the second class, based on Korean standards of seawater quality. In particular, COD of surface layer in August was found to be under the regular grades. It is, therefore, necessary to take measures for the control of pollution loads and the proper management of seawater quality in Mokpo harbour. The distribution patterns of DO, COD, VSS and Chlorophyll-a on surface layer along the downstream center line from inner harbour to harbour entrance were similar to one another at ebb tide in August.

• Transactions on Electrical and Electronic Materials
• /
• 제8권4호
• /
• pp.174-177
• /
• 2007

We fabricated organic field-effect transistors (OFETs) based a fluorinated copper phthalocyanine ($F_{16}CuPC$) and copper phthalocyanine (CuPc) as an active layer. And we observed the surface morphology of the $F_{16}CuPC$ thin film. The $F_{16}CuPC$ thin film thickness was 40 nm, and the channel length was $50{\mu}m$, channel width was 3 mm. And we also fabricated the $F_{16}CuPc/CuPc$ double layer FET and with different $F_{16}CuPc$ film thickness devices. We observed the typical current-voltage (I-V) characteristics and capacitance-voltage (C-V) in $F_{16}CuPc$ FET and we calculated the effective mobility. From the double layer FET devices, we observed the higher drain current more than single layer FET devices.