• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.89-93
• /
• 1994

Effects of density, inner-stress, and grain size on B-H hysteresis loop properties of Mg-ferrite were investigated. As the sintered bulk density increase, coercive force($H_c$) decreasand squareness ratio increase. Coercive force was very dependent on inner-stress in sintered body, so coercive force increase from 1.95[Oe] to 4.35[Oe] when inner stress present in bulk, however, the squareness ratio was almost not changed Coercive force and squareness ratio were independent on grain size of sintered body which is between 6-11[$\mu\textrm{m}$]

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1336-1338
• /
• 1996

A new model of dynamic hysteresis loops is presented. The model is a TSK fuzzy model and can be identified by using input-output data obtained from hysteresis loop systems. The model is shown to exhibit an increase in area of the loop with frequency, which is a hysteretic property.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1074-1078
• /
• 2005

In precision positioning applications, such as scanning tunneling microscopy and diamond turning machines [1], it is often required that actuators have nanometer resolution in displacement, high stiffness, and fast frequency response. These requirements are met by the use of piezoceramic actuators. A major limitation of piezoceramic actuators, however, is their lack of accuracy due to hysteresis nonlinearity and drift. The maximum error due to hysteresis can be as much as 10-15% of the path covered if the actuators are run in an open-loop fashion. Hence, the accurate control of piezoceramic actuators requires a control strategy that incorporates some form of compensation for the hysteresis. One approach is to develop an accurate model of the hysteresis and the use the inverse as a compensator. The Preisach model has frequently been employed as a nonlinear model for representing the hysteresis, because it encompasses the basic features of the hysteresis phenomena in a conceptually simple and mathematically elegant way. In this paper, a new numerical inversion scheme of the Preisach model is developed with an aim of compensating hysteresis in piezoceramic actuators. The inversion scheme is implemented using the first-order reversal functions and is presented in a recursive form. The inverted model is then incorporated in an open-loop control strategy that regulates the piezoceramic actuator and compensates for hysteretic effects. Experimental results demonstrate satisfactory regulation of the position of the piezoceramic actuator to the desired trajectories.

• Journal of the Korean Magnetics Society
• /
• v.6 no.1
• /
• pp.1-6
• /
• 1996

To simulate the characteristics of magnetic exchange coupling at the interface of MR/TbCo thin films, the directions of magnetizations were calculated by minimizing energy in the films. Newton method and Gauss-Seidel method were used. The width of M-H curve increased with TbCo anisotropy constant, and with the thickness of the transition region of TbCo layer. Hysteresis loop width became extremely narrow (less than 10 Oe of coercivity), when the TbCo transition region length was $400\;\AA$. Also the hysteresis loop of films with low interfacial exchange coupling constant was similiar to that of short transition region length. When interfacial exchange coupling constant was 1/100 of perfect coupling, hysteresis loop showed a coercivity of less than 10 Oe. Comparing the measured hysteresis loop of a fabricated sample with that of simulated one, exchange coupling con¬stant could be estimated.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2368-2370
• /
• 2000

In this paper, we proposed an inverse hysteresis model to cancel the nonlinear hysteresis phenomenon of a piezoelectric actuator and design a feedback control system based on the inverse hysteresis model. The piezoelectric actuator performs much better in open-loop response. However, the nonlinear hysteresis phenomenon should be linearized and the closed-loop control should be executed to get the required performance in the area, where high-speed and high-accuracy are required. Thus, it is shown by simulation that a good position tracking performance can be obtained for the repetitive desired position trajectory.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.9
• /
• pp.736-746
• /
• 2002

There has been a great demand for smart actuators in the field of micro-machines. However, the control accuracy of smart actuators, e.g., a shape memory alloy(SMA) and a piezoceramic actuator, is limited due to the inherent hysteresis nonlinearity. The Preisach hysteresis model has emerged as an appropriate model f3r the behavior of those smart actuators. Yet it is still not easy to construct a practical model of hysteresis using the classical Preisach model. Accordingly, in this paper, we propose a new simple method for modeling of the hysteresis nonlinearity of SMA. Using only the proportional relation of the major loop of hysteresis, the proposed method makes the computation of the Preisach model easy. We prove the efficacy of the proposed model through the comparative the experimentation with the classical Preisach model.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1783-1785
• /
• 1999

In this paper, we apply V-Q Lissajoucs' figure for observation of a V-Q (Voltage-Charge) hysteresis loop at interface between phosphor and insulation layer in P-ELDz which are a simple structure and the back lighting of LCDs (Liquid Crystal Display). In V-Q Lissajous' figure, we measured a change of hysteresis loop according to the thickness of Insulation and phosphor layer. From experiment result, we will be obtained a optimum thickness of insulation with comparing the correlation of a V-L (Voltage-Luminance) and V-Q hysteresis loop.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.10
• /
• pp.399-406
• /
• 1985

In this paper transparent PLZT ceramics for the composition of 9/65/35 (La/Zr/Ti ) are fabricated using hotpress and the possibility of application to optical shutter is examined by obtaining the On-Off characteristics of specimens. The ferroelectric E-P hysteresis loop exhibits slim loop suitable for the quadratic electrooptic effect. Measurements of the electrooptic effect show that specimens have the quadratic electrooptic effect but the light intensities as functions of electric field exhibit butterfly type hysteresis curves because of its slightly large saturation remanent polarization and coercive field. On-Off characteristics are obtained by electric fields of-6 kv/cm and +2kv/cm. As a result of experiments, 9/65/35 PLZT ceramics can be applied to optical shutter but construction with other composition which has more slim hysteresis loop is desired for obtaining the Off state by zero electric field.

• Nuclear Engineering and Technology
• /
• v.30 no.5
• /
• pp.387-395
• /
• 1998

In general, the laminated rubber bearing (LRB), a composite structure laminated with the elastic rubber and steel plates, has a complex hysteretic nonlinear characteristics in relationships between the restoring force and shear deflection. The representative nonlinear characteristics of LRB include the change of hysteresis loop with cyclic shear deflections and the hardening effects at large shear deflection regions. Changes of the hysteresis loop of LRB with cyclic shear deflections affect the horizontal stiffness and the damping characteristics. The hardening behavior of LRB in large shear deflection region results in an increased horizontal stiffness and therefore, has a great impacton the seismic responses. In this paper, the seismic response analysis is carried out using the modified hysteretic bi-linear model of LRB, which takes into account the hysteresis loop change and the hardening behavior with cyclic shear deflection. The results on seismic responses are compared with those obtained using the widely used hysteretic hi-linear model. The new model is found to reveal the greater amount of peak acceleration response.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1999.10a
• /
• pp.54-55
• /
• 1999