• 한국자기학회지
• /
• 제5권5호
• /
• pp.387-390
• /
• 1995

We have developed a new method for measuring the M-H hysteresis loop of a spheroid-shape magnetic material having a uniaxial anisotropy and discussed its accuracy at fields near the coercivity. Our torque magnetometric method simultaneously gives the saturation magnetization and the remnant magnetization. Furthermore, the coercivity depending on the applied field orientation is accurately measured by this simple technique. An accuracy of the present method is negligibly affected even at fields near the coercivity, where the magnetization is not uniform. The technique makes a torque magnetometer an extremely high sensitive tool for measuring M-H hysteresis loop.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2048-2053
• /
• 2005

The aim of this paper is to compensate hysteresis phenomena in Shape Memory Alloy (SMA) actuators by using numerical inverse Preisach model. This is used to design a controller that correct hysteresis effects and improve accuracy for the displacement of SMA actuators. Firstly, hysteresis is identified by numerical Preisach model implementation. The geometrical interpretation from first order transition curves is used for hysteresis modeling. Secondly, the inverse Preisach model is formulated and incorporated in open-loop control system in order to obtain desired input-output relationship with hysteresis reducing. The experimental results for hysteresis compensation by using this method are also shown in this paper.

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.173-176
• /
• 2011

Fe-Cr alloys with different Cr contents were prepared by an arc melting technique. The alloys were isochronally aged in the range from $400^{\circ}C$ to $900^{\circ}C$ with $50^{\circ}C$ steps with a holding time of 100 hours. The ageing produced embrittlement in the alloys due to either the formation of a Cr-rich ${\alpha}'$ phase or a $\sigma$ phase at high temperatures. Magnetic Hysteresis Loop (MHL) and Micro-Vickers hardness were measured at each step to correlate the magnetic and mechanical properties. Coercivity and hardness of the alloys were increased and remanence decreased up to 500-$550^{\circ}C$ due to formation of a Cr-rich ${\alpha}'$ phase. Beyond 500-$550^{\circ}C$ range, the coercivity and hardness decreased and remanence increased due to the coarsening or dissolution of the Cr-rich ${\alpha}'$ phase. In the Fe-48% Cr alloy, formation of the $\sigma$ phase at $700^{\circ}C$ reduced the maximum induction of the alloy significantly.

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.423-428
• /
• 2009

용융 폴리우레탄의 비 뉴톤 유동곡선을 Physica cone-plate 레오메타를 사용하여 여러 온도에서 구하였다. 이러한 유동 곡선을 이론적인 비 뉴톤 유동식에 적용하여 유동파라메타를 얻었다. 유동곡선에서 전단 속도를 증가시켰다가 감소시킬 때 hysteresis loop가 나타나며, 틱소트로피 유동 현상을 보인다. 용융 폴리우레탄은 전단 흐름에서는 강한 젤 현상을 보이나, 항복응력 이상에서는 비선형 점탄성 성질을 나타낸다. 전단속도를 감소시킬 때 구조변형이 일어나서 전단응력이 전단 속도 증가시보다 작은 값을 보이게 된다.

• Advances in concrete construction
• /
• 제11권2호
• /
• pp.141-149
• /
• 2021

This study is a basic research for evaluating the buildability of cementitious materials for three-dimensional (3D) printing. In the cement paste step, the thixotropy behavior according to the resting time, which represents the time interval between each layer, was analyzed. In addition, the relationship between the thixotropy behavior and 3D concrete printing buildability was derived by proposing a measurement method that simulates the 3D concrete printing buildup process. The analysis of the tendency of the thixotropy behavior according to the resting time revealed that the area of the hysteresis loop (AHyst) showed a tendency to increase and then converge as the resting time increased, which means hysteresis loop approach critical resting time for sufficient buildability. In the thixotropy behavior analysis that simulates the 3D concrete printing buildup process, the buildup ratio, which is the recovery rate of the shear stress, showed a tendency to increase and then converge as the resting time increased, which are similar results like hysteresis loop. It was concluded that AHyst and the buildup ratio can be used as parameters for determining the resting time, and they have close relationships with 3D concrete printing buildability.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.555-556
• /
• 2013

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.35-35
• /
• 2004

• 한국광학회:학술대회논문집
• /
• 한국광학회 1988년도 광학 및 양자전자학 워크샵
• /
• pp.127-131
• /
• 1988

In order to clarify the origin of perpendicular anisotropy in thermally evaporated TbFeCo amorphous thin films, we have investigated the effects of deposition angle on magnetic Kerr hysteresis loop, perpendicular magnetic anisotropy and internal stress depend strongly on the deposition angle and above a threshold value(30$^{\circ}$), the perpendicular anisotropy disapperars and the in-plane anisotropy appears. The measurement of internal stress is the major contribution to the perpendicular anisotropy. The measurements of Kerr hysteresis loops in the polar and the longitudinal directions show that as the deposition angle increases the polar kerr hystresis loop deteriorates while the longitudinal Kerr hystersis loop becomes prominent.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.4-12
• /
• 1982

1. 이 실험은 미국 Dept. of Navy의 위촉(委囑)을 받아 School of Forestry, Yale University에서 실시중인 열대산(熱帶産) 재목(材木)이 물리적(物理的) 기계적(機械的) 성질(性質) 연구계획(硏究計劃)의 일부(一部)로써 동대학(同大學) 목재공예연구실(木材工藝硏究室)에서 실시(實施)하였다. 2. 이 실험은 연구소에 장치(裝置)된 적은 실험설비를 이용(利用)하여 일정(一定)한 관계습도(關係濕度)(21%, 53%, 61% 그리고 83%등(等))를 조절하면서 各 관계습도(關係濕度) 밑에서 각(各) 시험편을 가질 수 있는 평형합수량(平衝含水量) equilibrium moisture content와 hysteresis loop 즉 relative humidity moisture content curve을 결정(決定)하기 위하여 실시하였다. 3. 이 실험을 통(通)하여 목적(目的)한 바 열대재(즉(卽) Ocotea, Tabebuia 그리고 Hymenaea)의 관계 습도에 따라 equilibrium moisture content와 이때에 일어나는 hysteresis loop를 알게 되었으며 각(各) 수종의 관계습도에 따른 equilibrium moisture content는 Table 4과 같으며 hysteresis loop 관계(關係)는 Fig. 2.3.4와 같다. 4. 이 실험을 통(通)하여서도 과거(過去) 모는 실험결과에서 보는 것과 같이 각(各) 수종에 따라 같은 관계습도에서 가질 수 있는 equilibrium moisture content에 상당(相當)한 차이(差異)를 볼 수 있었으며 그 차이(差異)는 관계습도가 높을수록 큰 경향(傾向)을 띠우고 따라서 hysteresis loop의 shape 에도 각기(各其) 그 고유(固有)한 특징(特徵)을 볼 수 있다. 5. 대기중(大氣中)에 있는 큰 재목(材木)이 가질 수 있는 평형함수량(乎衝含水量)(E M C) 은 Table 6와 같으며 이것 역시(亦是) 적은 시험편(試驗片)으로 시험(試驗)하여 얻은 결과(結果)와 같이 나무 종류(種類)에 따라 차이(差異)가 있고 그 차이(差異)는 관계습도(關係濕度)가 높으면 높을수록 크다는 것을 알게 되었다. 6. 재목(材木)의 생산지(生産地)가 다르면 즉 남방(南方) 열대지역(熱帶地方)에서 생산(生産)하는 것과 온대지방(溫帶地方)에서 생산(生産)되는 나무사이에는 나무 종류(種類)가 달라서 직접(直接) 비교(比較)는 안되나 나무 종류별(種類別)로 보면 역시(亦是) 이와같은 목재(木材)의 물리적(物理的) 성질(性質)에 확실(確實)히 차이(差異)가 있었다는 것을 알게 되었다.(참조(參照) Table 5) 7. 이 실험결과를 발표(發表)함에 있어 친(親)히 충고(忠告) 지도(指導)하여 주신 Wangaard와 Dickinson 양(兩) 교수님과 재과(材科) 주선(周旋)에 수고(受苦)를 아끼지 않고 전심(全心) 도와 주신 Mr. R. C. Claneh 씨(氏)등에게 충심(衷心)으로 감사(感謝)의 뜻을 표(表)하는 바이다.

• 전기의세계
• /
• 제29권9호
• /
• pp.594-598
• /
• 1980

This paper describes an analytical method on the starting torque of hysteresis motor, taking account of penetration effects of magnetic-field and eddy-current into the rotor, to the elliptical approximation method of hysteresis-loop. By the above method, it have obtained the torque of rotor ring with non-magnetic and non-conductive material arbor, and the results are concerned and compared with that of computed by aid of callibration factor, k=1+exp(-2t$_{r}$/.delta.).)