Browse > Article
http://dx.doi.org/10.12989/acc.2021.11.2.141

Evaluation of 3D printability of cementitious materials according to thixotropy behavior  

Lee, Keon-Woo (Institute of Gas Safety R&D, Korea Gas Safety Corporation)
Choi, Myoung Sung (Department of Civil and Environmental Engineering, Dankook University)
Publication Information
Advances in concrete construction / v.11, no.2, 2021 , pp. 141-149 More about this Journal
Abstract
This study is a basic research for evaluating the buildability of cementitious materials for three-dimensional (3D) printing. In the cement paste step, the thixotropy behavior according to the resting time, which represents the time interval between each layer, was analyzed. In addition, the relationship between the thixotropy behavior and 3D concrete printing buildability was derived by proposing a measurement method that simulates the 3D concrete printing buildup process. The analysis of the tendency of the thixotropy behavior according to the resting time revealed that the area of the hysteresis loop (AHyst) showed a tendency to increase and then converge as the resting time increased, which means hysteresis loop approach critical resting time for sufficient buildability. In the thixotropy behavior analysis that simulates the 3D concrete printing buildup process, the buildup ratio, which is the recovery rate of the shear stress, showed a tendency to increase and then converge as the resting time increased, which are similar results like hysteresis loop. It was concluded that AHyst and the buildup ratio can be used as parameters for determining the resting time, and they have close relationships with 3D concrete printing buildability.
Keywords
3D printing; buildability; thixotropy; resting time; cementitious material; rheology;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Airey, J., Nicholls, S., Taleb, H., Thorley, S. and Tomlinson, S. (2012), "Multidisciplinary design project mega scale 3D printing", Master of Engineering, University of Surrey, 15-18.
2 Asprone, D., Menna, C., Bos, F.P., Salet, T.A.M., Falcon, J.M. and Kaufmann, W. (2018), "Rethinking reinforcement for digital fabrication with concrete", Cement Concrete Res., 112, 111-121. https://doi.org/10.1016/j.cemconres.2018.05.020.   DOI
3 Bauchkar, S.D. and Chore, H.S. (2017), "Experimental studies on rheological properties of smart dynamic concrete", Adv. Concrete Constr., 5(3), 183-199. http://dx.doi.org/10.12989/acc.2017.5.3.183.   DOI
4 Bauchkar, S.D. and Chore, H.S. (2018), "Effect of PCE superplasticizers on rheological and strength properties of high strength self-consolidating concrete", Adv. Concrete Constr., 6(6), 561-583. http://dx.doi.org/10.12989/acc.2018.6.6.561.   DOI
5 Benyamina, S., Menadi, B., Bernard, S.K. and Kenai, S. (2019), "Performance of self-compacting concrete with manufactured crushed sand", Adv. Concrete Constr., 7(2), 87-96. http://dx.doi.org/10.12989/acc.2019.7.2.087.   DOI
6 Buswell, R.A., Leal de Silva, W.R., Jones, S.Z. and Dirrenberger, J. (2018), "3D printing using concrete extrusion: A roadmap for research", Cement Concrete Res., 112, 37-49. https://doi.org/10.1016/j.cemconres.2018.05.006.   DOI
7 Cesarette, G., Dini, E., Kestelier, X.D., Colla, V. and Pambaguian, L. (2014), "Building components for an outpost on the Lunar soil by means of a novel 3D printing technology", Acta Astronautica, 93, 430-450. https://doi.org/10.1016/j.actaastro.2013.07.034.   DOI
8 Chen, C., Park, Y.N., Yoo, S.K., Bae, S.C. and Kim, J.J. (2017), "Developing design process of 3d printing concrete mix proportion", J. Korea Inst. Build. Inform. Model., 7, 1-10. https://doi.org/10.13161/kibim.2017.7.3.001.   DOI
9 Cheng, D.C.H. and Evans, F. (1965), "Phenomenological characterization of the rheological behaviour of inelastic reversible thixotropy and antithixotropy fluids", Brit. J. Appl. Phys., 16(11), 1599-1617.   DOI
10 Choi, M.S., Prudhomme, R.K. and Scherer, G.W. (2017), "Rheological evaluation of compatibility in oil well cementing", Appl. Rheol., 27(4), 1-9. https://doi.org/10.3933/applrheol-27-43354.   DOI
11 Choi, Y.W., Choi, B.K., Park, M.S. and Sung, D. (2014), "A study on the rheology properties for development of sprayed high performance fiber reinforced cementitious composites for protection and blast resistant", J. Korea Recycl. Constr. Resour. Ins., 2, 188-195. https://doi.org/10.14190/JRCR.2014.2.3.188.   DOI
12 Coussot, P., Nguyen, Q.D., Huynh, H.T. and Bonn, D. (2002), "Avalanche behavior in yield stress fluids", Phys. Rev. Lett., 88, 4. https://doi.org/10.1103/PhysRevLett.88.175501.   DOI
13 Ferrais, C.F., Stutzman, P.E., Guthrie, W.F. and Winpigler, J. (2012), "Certification of SRM 2492: Bingham paste mixture for rheological measurements", NIST Spec. Publ., 174-260.
14 Ferraris, C.F., Obla, H.K. and Russell, H. (2001), "The influence of mineral admixtures on the rheology of cement paste and concrete", Cement Constr. Res., 3, 1245-255. https://doi.org/10.1016/S0008-8846(00)00454-3.   DOI
15 Feys, D., Cepuritis, R., Jacobsen, S., Lesage, K., Secrieru, E. and Yahia, A. (2017), "Measuring rheological properties of cement pastes: Most common techniques, procedures and challenges", RILEM Tech. Lett., 2, 129-135.   DOI
16 Goo, H.C., Lee, G.C. and Sun, H.Y. (2006), "A comparison study between evaluation method on the rheological properties of cement paste", J. Korea Ins. Build. Constr., 21, 75-82. https://doi.org/10.5345/JKIC.2006.6.3.075.
17 Jeon, K.H., Park, M.B., Kang, M.K. and Kim, J.H. (2013), "A study on the development of an automated freeform fabrication system and construction materials", J. Korea Soc. Civil Eng., 4, 1665-1673. https://doi.org/10.12652/Ksce.2013.33.4.1665.   DOI
18 Hasanzadeh, B. (2017), "Testing and modeling of the thixotropy behavior of cementitious materials", Doctoral Thesis, University of Louisville, Louisville, KY.
19 Hojati, M., Nazarian, S., Duarte, J.P., Radlinska, A., Ashrafi, N., Craveiro, F. and Bilen, S. (2018), "3D printing of concrete: A continuous exploration of mix design and printing process", 42nd IAHS World Congress the Housing for the Dignity of Mankind.
20 Hwang, H.J., Lee, S.H. and Lee, W.J. (2007), "Effect of particle size distribution of binder on the rheological properties of slag cement pastes", J. Korea Ceram. Soc., 44, 6-11. https://doi.org/10.4191/kcers.2007.44.1.006.   DOI
21 Jeong, H.S., Han, S.J., Choi, S.H., Lee, Y.J., Yi, S.T. and Kim, K.S. (2019), "Rheological property criteria for buildable 3D printing concrete", J. Mater., 12(4), 657. https://doi.org/10.3390/ma12040657.   DOI
22 Koehler, E.P. Fowler, E.W., Ferraris, C.F. and Amziane, S. (2006), "A new portable rheometer for fresh self-consolidating concrete", ACI Mater. J., 233, 97-116.
23 Le, T.T., Austin, S.A., Lim, S., Buswell, R.A., Gibb, A.G.F. and Thorpe, T. (2012a), "Mix design and fresh properties for highperformance printing concrete", Mater. Struct., 45, 1221-1232. https://doi.org/10.1617/s11527-012-9828-z.   DOI
24 Le, T.T., Austin, S.A., Lim, S., Buswell, R.A., Law, R., Gibb, A.G.F. and Thorpe, T. (2012b), "Hardened properties of high-performance printing concrete", Cement Concrete Res., 42, 558-566. https://doi.org/10.1016/j.cemconres.2011.12.003.   DOI
25 Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen, C. and Dillenburger, B. (2018), "Particle-bed 3D printing in concrete construction- Possibilities and challenges", Cement Concrete Res., 112, 50-65. https://doi.org/10.1016/j.cemconres.2018.05.018.   DOI
26 Lee, D.K. and Choi, M.S. (2018), "Standard reference materials for cement paste Part I: Suggestion of consitituent materials based on rheological analysis", J. Mater., 11, 624. https://doi.org/10.3390/ma11040624.   DOI
27 Lee, D.K., Lee, K.W. and Choi, M.S. (2018), "Study on filling capacity of self-consolidating concrete for modular LNG storage tank", J. Korea Soc. Saf., 33, 50-57. https://doi.org/10.14346/JKOSOS.2018.33.6.50.   DOI
28 Lee, H.J., Kim, W.W. and Moon, J.H. (2017), "Study on rheological properties of mortar for the application of 3D printing method", J. Korea Recycl. Constr. Resour. Inst., 6, 16-24. https://doi.org/10.14190/JRCR.2018.6.1.16.   DOI
29 Lim, S., Buswell, R.A., Le, T.T., Rene, W., Austin, S., Gibb, A. and Tony, T. (2011), "Development of a viable concrete printing process", Proceedings of the International Conference on Global Innovation in Construction 2011 in Loughborough, 512-520.
30 Lloret, E., Shahab, A.R., Linus, M., Flatt, R.J., Gramazio, F., Kohler, M. and Langenberg, S. (2015), "Complex merging concrete structures existing casting techniques with digital fabrication", Comput. Aid. Des., 60, 40-49. https://doi.org/10.1016/j.cad.2014.02.011.   DOI
31 Malaeb, Z., Hachem, H., Tourbah, A. and Hamzeh F. (2015), "3D concrete printing: machine and mix design", Int. J. Civil Eng. Technol., 6, 14-22.
32 Perrot, A., Rangeard, D. and Pierre, A. (2016), "Structural built-up of cement-based materials used for 3Dprinting extrusion techniques", Mater. Struct., 49, 1213-1220.   DOI
33 Marchon, D., Kawashima, S., Bey, H.B., Mantellato, S. and Ng, S. (2018), "Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry", Cement Concrete Res., 112, 96-110. https://doi.org/10.1016/j.cemconres.2018.05.014.   DOI
34 Oh, J., Oh, J.S. and Jung, H.Y. (2014), "Applicability to the construction of 3D Printing technology", Mag. Korea Soc. Civil Eng., 82, 38-45. https://doi.org/10.1016/j.cemconres.2018.05.014.   DOI
35 Panda, B. and Tan, M.J. (2018b) "Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing", Ceram. Int., 44, 10258-10265. https://doi.org/10.1016/j.ceramint.2018.03.031.   DOI
36 Panda, B., Unluer, C. and Tan, M.J. (2018a) "Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing", Cement. Concrete Compos., 94, 307-314. https://doi.org/10.1016/j.cemconcomp.2018.10.002.   DOI
37 Panda, B., Unluer, C. and Tan, M.J. (2019) "Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing", Compos. B., 176, 109290. https://doi.org/10.1016/j.compositesb.2019.107290.   DOI
38 Quanji, Z. (2010), "Thixotropy Behavior of cement-based materials: Effect of clay and cement types", Master's Thesis, Iowa State University, Ames, IA.
39 Reiter, L., Wangler, T., Roussel, N. and Flatt, R.J. (2018), "The role of early age structural build-up in digital fabrication with concrete", Cement Concrete Res., 112, 86-95. https://doi.org/10.1016/j.cemconres.2018.05.011.   DOI
40 Roussel, N. (2006), "A thixotropy model for fresh fluid concretes: Theory, validation and applications", Cement Concrete Res., 36, 1797-1806. https://doi.org/10.1016/j.cemconres.2006.05.025.   DOI
41 Roussel, N. (2018), "Rheological requirements for printable concretes", Cement Concrete Res., 112, 76-85. https://doi.org/10.1016/j.cemconres.2018.04.005.   DOI
42 Saak, A.W. (2000), "Characterization and modeling of the rheology of cement paste: With applications toward self-flowing materials", Doctoral Thesis, Northwestern University, Evanston, IL.
43 Zareiyan, B. and Khoshnevis, B. (2017), "Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete", Autom. Constr., 83, 212-221. https://doi.org/10.1016/j.autcon.2017.08.019.   DOI
44 Sanjayan, J.G., Nematollahi, B., Xia, M. and Marchment, T. (2018), "Effect of surface moisture on inter-layer strength of 3D printed concrete", Constr. Build. Mater., 172, 468-475. https://doi.org/10.1016/j.conbuildmat.2018.03.232.   DOI
45 Schutter, G.D., Lesage, K., Mechtcherine, V., Nerella, V.N., Habert, G. and Juan, I.A. (2018), "Vision of 3D printing with concrete Technical, economic and environmental potentials", Cement Concrete Res., 112, 25-36. https://doi.org/10.1016/j.cemconres.2018.06.001.   DOI
46 Schwartz, J. (2018), "Graphic statics and their potential for digital design and fabrication with concrete", Cement Concrete Res., 112, 122-135. https://doi.org/10.1016/j.cemconres.2018.06.015.   DOI
47 Zhang, Y., Zhang, Y., Wei, Y., Liu, G., Liu, Y. and Yang, Y. (2019), "Rheological and harden properties of the high-thixotropy 3D printing concrete", Constr. Build. Mater., 201, 278-285. https://doi.org/10.1016/j.conbuildmat.2018.12.061.   DOI
48 Zhang, J. and Khoshnevis, B. (2013), "Optimal machine operation planning for construction by Contour Crafting", Autom. Constr., 29, 50-67. https://doi.org/10.1016/j.autcon.2012.08.006.   DOI
49 Zhang, Y., Zhang, Y., Liu, G., Yang, Y., Wu, M. and Pang, B. (2018), "Fresh properties of a novel 3D printing concrete ink", Constr. Build. Mater., 174, 263-271. https://doi.org/10.1016/j.conbuildmat.2018.04.115.   DOI