• 한국분무공학회지
• /
• 제3권4호
• /
• pp.25-34
• /
• 1998

Hygroscopic aerosols can rapidly grow in size by steam condensation even under subsaturated steam conditions. Much efforts have been made to handle this process, but there have been computational difficulties in handling the condensational growth of hygroscopic aerosols by contentional methods. A recently released computer code, CONTAIN 2.0, employs a new technique called Moving Sectional Method(MSM) to handle the growth of hygroscopic aerosols. As a part of the model verification efforts, we have used the code to simulate the VANAM M3U hygroscopic aerosol experiment. We assess the accuracies of the new MSM and the conventional Fixed Sectional Method(ESM) based on the simulation results. Also presented are discussions about the robustness of the MSM.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.117-123
• /
• 2004

본 연구는 셀룰로스 기반의 복합소재에서의 수분 흡수에 의한 뒤틀림 변형효과를 위하여 변형된 고전 선형 적층판 이론을 바탕으로 실험에 의한 반복 데이터 분석 방법과 수치해석의 방법을 이용하여 연구하였다. 실험적 모델은 Moire Interferometer에 따라 수분 생성, 변형과 변형률 모델을 구현하였으며, 실험에 쓰여진 재료는 셀룰로이드 강화 에폭시를 적층한 재료를 사용하였다. 이러한 수치해석에서 제시된 방법으로 내부응력 변화에 따른 변형의 안정성 모델의 평가 툴을 개발하고, 예측모델을 구현할 수 있다.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1235-1239
• /
• 2018

We present a novel process to fabricate three-dimensional (3D) metallic patterns from 3D printed polymeric structures utilizing different hygroscopic swelling behavior of two different polymeric materials. 3D patterns are printed with two different polymers as cube shape. The surface of the 3D printed polymeric structures is plated with nickel by an electroless plating method. The nickel patterns on the surface of the 3D printed cube shape structure are formed by removing sacrificial layers using the difference in the rate of hygroscopic swelling between two printing polymer materials. The hygroscopic behavior on the interfaced structure was modeled with COMSOL Multiphysics. The surface and electrical properties of the fabricated three-dimensional patterns were analyzed and characterized.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.331-340
• /
• 2004

This paper presents a feasibility study of a fresh air load reduction system by using an underground double floor space. The fresh air is introduced into the double slab space and passes through the opening bored into the footing beam. The air is cooled by the heat exchange with the inside surface of the double slab space in summer, and heated in winter. This system not only reduces sensible heat load of the fresh air by heat exchange with earth but also reduces latent heat load of the fresh air by ad/de-sorption of underground double slab concrete. In this paper, we used a model for evaluation of fresh air latent heat load reduction by hygroscopic of air to earth exchange system taking into account coupled heat and moisture transfer of underground double floor space. In conclusion it shows the validity of the proposed method for a design tool and the quantitative effect of the system.

• 한국산업융합학회 논문집
• /
• 제9권3호
• /
• pp.229-233
• /
• 2006

The water vapor permeability of polypropylene spun bond non-woven fabrics were investigated with the water vapor permeability velocity at $20^{\circ}C$, $30^{\circ}C$ and $40^{\circ}C$ by applying the hygroscopic method. At each temperature 50, 65 and 80 %RH conditions were used. The results indicated that the water vapor permeability velocity increased with increasing the water vapor concentration difference between both sides of sample surfaces and it decreased with increasing the number of the piled-up fabrics and the apparent density.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3442-3447
• /
• 2014

본 논문에서는 간단한 플라스틱전자패키지의 폴리머 흡습특성 평가 방법을 제시하였다. 흡습팽창에 의한 변형을 측정하고 유한요소법으로 해석하였다. 흡습특성 평가를 위해 시편제작을 제작하고, 흡습시간에 따라 폴리머에 내재된 수분질량을 측정하여, 수치해석 결과와 비교분석하였다. 흡습확산 방정식은 열전달 방정식과 유사한 형태를 가지고 있기 때문에 열전달 해석 절차에 따라 상용 유한요소코드를 적용하여 흡습압력비를 구하고, 자체코드로 흡습질량을 계산하였다. 비전도성 폴리머는 동일 제품이라도 생산시기에 따라 흡습특성에 변화가 있었다. 여러 가지 흡습특성에 대해 흡습질량을 수치해석으로부터 계산하고 측정치에 가장 근접한 흡습질량 변화의 그래프를 선택하여 최적의 확산계수와 용해도를 구하였다. 제시된 방법은 빠른 대응을 요구하는 생산현장에서 반도체 패키지 폴리머의 흡습특성을 신속하게 평가하는 데 적용될 수 있을 것이다. 또한 흡습팽창을 모아레 간섭계로 측정하고 수치해석으로 비교하였다. 결과적으로 흡습질량의 측정값과 수치해석 결과를 비교하여 용해도와 확산계수는 0.0320 [g/mm/N]과 0.243 [$mm^2/{\mu}s$]으로 결정하였고, ANSYS 구조해석에 의한 변형은 모아레 간섭에 의한 측정결과와 매우 유사하였다.

• Restorative Dentistry and Endodontics
• /
• 제33권2호
• /
• pp.115-124
• /
• 2008

본 연구의 목적은 수 종의 레진계 임시수복재의 중합수축 및 수화팽창을 측정하고 레진계 임시수복재와 와동면 사이의 미세누출을 평가하고자 하였다. 본 실험의 재료는 5종의 광중합형 레진계 임시충전재 Fermit, Quicks, Provifil, Spacer, Clip와 대조군으로 석고계 충전재 Caviton을 사용하였다. 'Bonded disc method'를 이용하여 중합수축을 측정하였고, 미리 중합된 디스크 형태의 시편을 생리식염수에 담그고 LVDT로 7 일 동안 수화팽창을 기록하였다. 발거된 120개의 상, 하악 대구치에 1 급 와동을 형성한 후 각각 20개씩 6개의 군으로 나누어 각 재료를 충전한 후, 1000 회의 Thermocycling을 실시하고 2% methylene blue 염색 용액을 이용하여 미세누출을 평가하였다. 연구결과는 다음과 같다. 1. Fermit의 중합수축이 가장 적었고 (0.22%) Spacer (0.38%), Quicks (0.64%) Provifil (0.67%), Clip (0.67%) 의 순이었다. 2. 모든 재료는 24 시간 이내에 급격한 수화팽창을 나타냈고 7 일 후 수화팽창은 Caviton이 가장 컸다 (11.5%). 레진계 임시수복재는 0.43-1.1%가량 팽창하였다. 3. Fermit의 미세누출이 가장 많았으며 Quicks의 미세누출이 가장 적었다. Spacer와 Clip은 Caviton과 비슷한 정도의 미세누출을 보였다. 4. 중합수축 또는 수화팽창과 미세누출 사이의 직접적 인 상관관계는 관찰할 수 없었다.

• 약학회지
• /
• 제22권1호
• /
• pp.8-14
• /
• 1978

The method that changes sodium cloxacillin from amorphous form to hydrate form was investigated. Using organic solvents of which dielectric constants are greater than 9, the amorphous sodium cloxacillin could be changed to hydrate form. The difference of water content of sodium cloxacillin hydrate caused the differences of ir spectrum at $3,350~3,360cm_{-1}$, and owing to the decrease of water content, hydrate form was changed to the morphous form, which could be identified by x-ray diffraction pattern. Regarding the stability of sodium cloxacillin in activity, the hydrate form was stable but the amorphous form was very unstable. Moreover, the stable hydrate form was scarcely hygroscopic, while the other form was hygroscopic, becoming a fused state ar $50^{\circ}$. and R.H. 50%.

• Composites Research
• /
• 제31권5호
• /
• pp.202-208
• /
• 2018

In this paper, mechanical and hygroscopic properties of teak sawdust and recycled polypropylene (RPP) composites are evaluated and compared with virgin polypropylene (VPP) matrix based composites. Verities of composites are prepared by variation in the plastic types, wood plastic ratio and the addition of coupling agent in the formulations. Mixing of wood sawdust and polypropylene is done by a twin screw extruder, and then sheets of wood plastic composites (WPCs) are produced by using the compression molding method. The results show that recycled matrix composites exhibit better tensile, flexural strength with low impact strength than virgin matrix based composites. Recycled composites show low water absorption and thickness of swelling than virgin matrix based composites. The results confirm that wood content in the polymer matrix affects the performance of composites while presence maleated polypropylene (MAPP) improves the properties of the composites significantly. Developed RPP matrix composites are as useful as VPP matrix composites and have the potential to replace the wood and plastics products without any adverse effect of the plastics on the environment.

• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.832-838
• /
• 2008

Diatomite, bentonite and zeolite were used as porous materials for fabricating hygroscopic panels. Moisture adsorption and desorption of porous materials were investigated and hydrothermal method was applied to fabricate panels. Cheolwon diatomite and Pohang zeolite showed excellent characteristics of moisture adsorption and desorption. These characteristics were caused by higher surface area and pore volume of porous materials. Correlation coefficient between surface area and moisture adsorption content of porous materials was 0.93. Moisture adsorption contents were influenced by surface area and pore volume of panels, and surface area more effected on moisture adsorption. Correlation coefficient between surface area and moisture adsorption content of panels was 0.86. Moisture adsorption content of panel with 10% Pohang zeolite was $180\;g/m^2$ and that of 10% Cheolwon diatomite was $170\;g/m^2$. Moisture desorption content of panel with 10% Pohang zeolite was $105\;g/m^2$. Moisture adsorption contents of panel with porous materials were higher than that of panel without porous materials.