• Journal of the Korean Chemical Society
• /
• v.51 no.3
• /
• pp.232-239
• /
• 2007

The reaction of 1,1'-bis(dimethylsilyl)ferrocene with various aldehydes in the presence of a catalytic amount of Ni(PEt3)4 lead to the acyclic products by monohydrosilylation. The same reaction in the presence of a catalytic amount of (C2H4)Pt(PPh3)2 leads to the different cyclic six membered ring compound by double silylation. Platinum catalyzed double silylation of 4-cyanobenzaldehyde was generated 5,6-ferrocenylene-1,1,4,4,-tetramethyl-2-oxa-2- cyanophenyl-1,4-disylacyclehexane which was crystallized to have crystal structure.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3451-3455
• /
• 2013

Single-crystalline silicon nanowires (SiNWs) were fabricated by using an electroless metal-assisted etching of bulk silicon wafers with silver nanoparticles obtained by wet electroless deposition. The etching of SiNWs is based on sequential treatment in aqueous solutions of silver nitrate followed by hydrofluoric acid and hydrogen peroxide. SEM observation shows that well-aligned nanowire arrays perpendicular to the surface of the Si substrate were produced. Free-standing SiNWs were then obtained using ultrasono-method in toluene. Alkyl-derivatized SiNWs were prepared to prevent the aggregation of SiNWs and obtained from the reaction of SiNWs and dodecene via hydrosilylation. Optical characterizations of SiNWs were achieved by FT-IR spectroscopy and indicated that the surface of SiNWs is terminated with hydrogen for fresh SiNWs and with dodecyl group for dodecyl-derivatized SiNWs, respectively. The main structures of dodecyl-derivatized SiNWs are wires and rods and their thicknesses of rods and wire are typically 150-250 and 10-20 nm, respectively. The morphology and chemical state of dodecyl-derivatized SiNWs are characterized by scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.720-725
• /
• 2014

Aminopropyl terminated polydimethylsiloxane was synthesized by hydrosilylation reaction with hydride terminated polydimethlysiloxane and allyl amine. Polydimethylsiloxane modified urea with isocyanate group was prepared from cyclic trimer of hexamethyldiisocyanate with aminopropyl terminated polydimethylsiloxane. Polydimethylsiloxane modified urea/acrylate resin (PUA) was prepared from the urethane reaction of PU with isocyanate group and 2-hydroxyethylmethacrylate. PUA structure was analyzed by FTIR and NMR. Coating materials were prepared by mixing PUA, acrylic monomer, photo-initiator, and solvent and coated on PET film to obtain flexible hard coating film by UV irradiation.

• Journal of Integrative Natural Science
• /
• v.10 no.4
• /
• pp.197-201
• /
• 2017

Organosilicon compound containing silphenylene unit as an eletrolyte for the application of lithium-ion batteries was synthesized by hydrosilylation method between 1,4-bis(dimethylsilylhydro)benzene and 3-[2-(2-methoxyethoxy)ethoxy]-1-propene. As-prepared new organosilicon compounds containing spacer such as propyl group with ethylene glycol are synthesized to improve thermal stability and to promote conductivity. The products are characterized by spectroscopic analysis.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.97-98
• /
• 2006

After general introduction for hyperbranched polymers, hyperbranched polysiloxysilanes (HBPS) were introduced as new functional polymers. Vinyl terminated HBPS was synthesized starting from AB2 type monomer by hydrosilylation reaction. Vinyl group can be converted various functional groups such as carboxylic acid and alcohol. HBPS had strong interaction to inorganic surface. As an example of this phenomenon, silica gel bead for HPLC was modified with thermo sensitive polymers. The resulting bead was successfully applied to Green Chronatography.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1491-1504
• /
• 2012

InP quantum dot (QD)-organosilicon nanocomposites were synthesized and their photoluminescence quenching was mainly investigated because of their applicability to white LEDs (light emitting diodes). The as-synthesized InP QDs are capped with myristic acid (MA), which are incompatible with typical silicone encapsulants. We have introduced a new ligand, 3-aminopropyldimethylsilane (APDMS), which enables embedding the QDs into vinyl-functionalized silicones through direct chemical bonding. The exchange of ligand from MA to APDMS does not significantly affect the UV absorbance of the InP QDs, but quenches the PL to about 10% of its original value with the relative increase in surface related emission intensities, which is explained by stronger coordination of the APDMS ligands to the surface indium atoms. InP QD-organosilicon nanocomposites were synthesized by connecting the QDs using a short cross-linker such as 1,4-divinyltetramethylsilylethane (DVMSE) by the hydrosilylation reaction. The formation and changes in the optical properties of the InP QD-organosilicon nanocomposite were monitored by ultraviolet visible (UV-vis) absorbance and steady state photoluminescence (PL) spectroscopies. As the hydrosilylation reaction proceeds, the QD-organosilicon nanocomposite is formed and grows in size, causing an increase in the UV-vis absorbance due to the scattering effect. At the same time, the PL spectrum is red-shifted and, very interestingly, the PL is quenched gradually. Three PL quenching mechanisms are regarded as strong candidates for the PL quenching of the QD nanocomposites, namely the scattering effect, F$\ddot{o}$rster resonance energy transfer (FRET) and cross-linker tension preventing the QD's surface relaxation.

• Macromolecular Research
• /
• v.11 no.6
• /
• pp.431-436
• /
• 2003

A new photoconducting polymer, diphenyl hydrazone-substituted polysiloxane, was successfully synthesized by the hydrosilylation method and characterized by FT-IR, $^1$H-NMR, and $^{29}$ Si-NMR spectroscopy. The glass transition temperature (T$_{g}$) of the polysiloxane having pendant diphenyl hydrazone was ca. 62 $^{\circ}C$, which enabled a component of a low-T$_{g}$ photorefractive material to be prepared without the addition of any plasticizers. This polysiloxane, with 1 wt% of $C_{60}$ dopant, showed a high photoconductivity (2.8 ${\times}$ 10$^{-12}$ S/cm at 70 V/${\mu}{\textrm}{m}$) at 633 nm, which is necessary for fast build-up of the space-charge field. A photorefractive composite was prepared by adding a nonlinear optical chromophore, 2-{3-[2-(dibutylamino)-1-ethenyl]-5,5-dimethyl-2-cyclohexenylidene} malononitrile, into the photoconducting polysiloxane together with $C_{60}$ . This composite shows a large orientation birefringence ($\Delta$n = 2.6 ${\times}$ 10$^{-3}$ at 50 V/${\mu}{\textrm}{m}$) and a high diffraction efficiency of 81 % at an electric field of 40 V /${\mu}{\textrm}{m}$.textrm}{m}$.EX>.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.546-567
• /
• 2015

Silicone-based surfactants consist of a hydrophobic organosilicone group coupled to one or more hydrophilic polar groups, while the hydrophobic groups of hydrocarbon surfactants are hydrocarbons. Silicone surfactants have been widely used in many industrial fields starting from polyurethane foam to construction materials, cosmetics, paints & inks, agrochemicals, etc., because of their low surface tension, lubricity, spreading, water repellency and thermal and chemical stability. A wide range of silicone surfactant structures are required to provide the functional diversity for reflecting the necessities in the various applications. This review covers the basic properties and the synthetic schemes of polydimethylsiloxane and reactive polysiloxanes as hydrophobic siloxane backbones, the main reaction schemes, such as hydrosilylation reaction, for coupling reactive polysiloxanes to hydrophilic groups, and the synthetic schemes of the main polysiloxane surfactants including polyether-, ionic-, carbohydrate-type surfactants.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.116-120
• /
• 2007

The synthesis of 1-[2-(3-{7-oxabicyclo[4.1.0]heptyl} 1,1,3,3-tetramethyl-disiloxane (Mono), which is a key intermediate for the synthesis of monomers applied for photopolymer systems based on the cationic ring opening polymerization, was studied. Mono was successfully synthesized by the hydrosilylation reaction of 4-vinyl-1-cyclohexene 1,2-epoxide (VCHO) with an excess amount of 1,1,3,3-tetramethyldisiloxane (TMDS) in the presence of a Speier catalyst. The structure and the purity of Mono were characterized by FT-IR, $^1H-NMR$, and $^{29}Si-NMR$. The optimum conditions for the hydrosilyation reaction were found to be 1:4 molar ratio of VCHO to TMDS and 5 ppm of the catalyst at the temperature of $55^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.260-266
• /
• 2006

For the synthesis of polyurethane memory foam stabilizer with fine cells, hydrosilylation reaction with various polyalkyleneoxides and hydrogen functional group of polymethylhydrogensiloxane (D = 75, D' = 15) was conducted. Polyalkyleneoxides (PAO) used in this research were ethylene oxides or ethylene-co-propylene oxides with terminal groups of hydroxides or methyl groups. To analyze the molecular structures and molecular weights as well as the reaction yields (98%), NMR and GPC analysis were executed. Synthesized siloxane surfactants modified with polyalkylene (EO = 12 units) were applied to producing flexible polyurethane fine memory foams from 0.6 pphp to 2.0 pphp. By controlling the amount of the surfactant, physical characteristics, the polyurethane memory foam with cell size (minimum $0.868{\mu}m$), air flows (-78 KPa), and recovery times (8 sec) were achieved.