• 제목/요약/키워드: hydrogen production yield

검색결과 155건 처리시간 0.028초

2단(유산발효+광발효) 발효공정을 통한 음식물쓰레기로부터의 수소생산 (Biohydrogen Production from Food Waste by Two-Stage (Lactate+Photo)-Fermentation Process)

  • 김옥선;손한나;김동훈;전동진;이영우;김미선
    • 한국수소및신에너지학회논문집
    • /
    • 제22권3호
    • /
    • pp.333-339
    • /
    • 2011
  • In the present work, it was attempted to produce $H_2$ from food waste by the two-stage fermentation system. Food waste was acidified to lactate by using indigenous lactic acid bacteria under mesophilic condition, and the lactate fermentation effluent (LFE) was subsequently converted to $H_2$ by photo-fermentation. $Rhodobacter$ $sphaeroides$ KD131 was used as the photo-fermenting bacteria. The optimal conditions for lactate fermentation were found to be pH of 5.5 and substrate concentration of 30 g Carbo. COD/L, under which yielded 1.6 mol lactate/mol glucose. By filtering the LFE and adding trace metal, $H_2$ production increased by more than three times compared to using raw LFE, and finally reached the $H_2$ yield of 3.6 mol $H_2$/mol lactate. Via the developed two-stage fermentation system $H_2$ yield of 5.8 mol $H_2$/mol glucose was achieved from food waste, whose value was the highest that ever recorded.

목질계 바이오매스로부터 가스화에 의한 합성가스 제조 연구 (Synthesis Gas Production from Gasification of Woody Biomass)

  • 조원준;모용기;송택용;백영순;김승수
    • 한국수소및신에너지학회논문집
    • /
    • 제21권6호
    • /
    • pp.587-594
    • /
    • 2010
  • Hydrogen is an alternative fuel for the future energy which can reduce pollutants and greenhouse gases. Synthesis gas has played an important role of synthesizing the valuable chemical compounds, for example methanol, DME and GTL chemicals. Renewable biomass feedstocks can be potentially used for fuel and chemicals. Current thermal processing techniques such as fast pyrolysis, slow pyrolysis, and gasification tend to generate products with a large slate of compounds. Lignocellulose feedstocks such as forest residues are promising for the production of bio-oil and synthesis gas. Pyrolysis and gasification was investigated using thermogravimetric analyzer (TGA) and bubbling fluidized bed gasification reactor to utilize forest woody biomass. Most of the materials decomposed between $320^{\circ}C$ and $380^{\circ}C$ at heating rates of $5{\sim}20^{\circ}C$/min in thermogravimetric analysis. Bubbling fluidized bed reactor was used to study gasification characteristics, and the effects of reaction temperature, residence time and feedstocks on gas yields and selectivities were investigated. With increasing temperature from $750^{\circ}C$ to $850^{\circ}C$, the yield of char decreased, whereas the yield of gas increased. The gaseous products consisted of mostly CO, $CO_2$, $H_2$ and a small fraction of $C_1-C_4$ hydrocarbons.

3상 교류 부채꼴 방전을 이용한 메탄으로부터 수소 생산 (Production of Hydrogen from Methane by 3phase AC GlidArc Plasma)

  • 전영남;김성천;임문섭
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.2232-2237
    • /
    • 2007
  • Steam reforming and catalytic reforming of $CH_4$ conversion to produce synthesis gas require both high temperatures and high pressure. Non-thermal plasma is considered to be a promising technology for the hydrogen rich gas production from methane. In this study, three phase AC GlidArc plasma system was employed to investigate the effects of gas composition, gas flow rate, catalyst reactor temperature and applied electric power on the $CH_4$ and $H_2$ yield and the product distribution. The studied system consisted of three electrode and it connected AC generate power system different voltages. In this study, air was used for the partial oxidation of methane. The results showed that increasing gas flow rate, catalyst reactor temperature, or electric power enhanced $CH_4$ conversion and $H_2$ concentration. The reference conditions were found at a $O_2$/C molar ratio of 0.45, a feed flow rate of 4.9 ${\ell}$/min, and input power of 1kW for the maximum conversions of $CH_4$ with a high selectivity of $H_2$ and a low reactor energy density.

  • PDF

수소생산을 위한 해조류 유래 수용액 상 바이오오일의 수증기 개질 반응 (Hydrogen Production by Steam Reforming of Aqueous Bio-Oil from Marine Algae)

  • 박용범;임한권;우희철
    • Korean Chemical Engineering Research
    • /
    • 제54권1호
    • /
    • pp.94-100
    • /
    • 2016
  • 해조류 유래 급속열분해를 통해 생성된 바이오오일로부터 수소가스를 생산하기 위해 상용 개질 촉매를 사용하여 수증기 개질 반응을 수행하였다. 반응원료로 급속열분해로부터 생성되는 crude 바이오오일의 상분리를 통해 얻어진 수용액상의 바이오오일이 사용되었으며, 상용 개질 촉매(FCR-4-02, POS-7, Cat. A, RUA), 반응온도 및 수증기/탄소(S/C) 비율에 따른 수증기 개질 반응의 활성을 비교 연구하였다. 실험 결과 원료의 S/C 비율과 촉매의 구성성분에 따라 반응활성이 크게 달라지는 것이 확인되었으며, 특히 POS-7 촉매를 사용한 1073 K, S/C 비율 10의 조건에서의 수증기 개질 반응에서 가장 높은 수소 수율(70%)이 확인되었다.

청정수소생산을 위한 에탄올 수증기개질반응 및 막반응기에서의 응용 (Ethanol Steam Reforming Reaction for a Clean Hydrogen Production and its Application in a Membrane Reactor)

  • 임한권
    • 청정기술
    • /
    • 제19권4호
    • /
    • pp.379-387
    • /
    • 2013
  • 본 총설에서는 최근 청정수소생산방법으로 큰 관심을 받고 있는 에탄올 수증기개질반응(ethanol steam reforming reaction)에 대해 소개하고자 한다. 다양한 촉매, 반응온도, 에탄올과 물의 몰비에 따른 에탄올 수증기개질반응의 반응특성 및 반응속도식(reaction rate equation)을 검토해 보고자 한다. 또한, 반응기와 분리기를 동시에 장착한 새로운 개념의 막반응기(membrane reactor)를 소개하며, 막반응기의 사용이 일반적인 충전층반응기(packed-bed reactor)에 비해 에탄올 전환율과 수소 수율에 어떠한 영향을 주는지에 대하여 고찰해 보고자 한다.

Effect of Culture Conditions on the production of Succinate by Enterococcus faecalis RKY1

  • Kang, Kui-Hyun;Yun, Jong-Sun;Ryu, Hwa-Won
    • Journal of Microbiology and Biotechnology
    • /
    • 제10권1호
    • /
    • pp.1-7
    • /
    • 2000
  • Bioconversion of fumarate to succinate was anaerobically conduced in a synthetic medium containing glycerol as a hydrogen donor and fumarate as a hydrogen acceptor. We investigated the effects of pH, carbon and nitrogen sources, conversion substrate, and other culture conditions on the production of succinate using a nwely isoloated Enterococcus facalis PKY1. Addition of a variety of carbonates to the medium significantly increasd the rates of production of succinate. The production of succinate and cell growth were relatively satisfactory in the pH range of 7.0-7.6. By using glycerol as a hydrogen donor, high purity succinate was produced with few byproducts. Yeast extract as a sole nitrogen source was the most effective for producing succinalte. As a result, the optimum condition of biconversion was obtained at a medium containing 20g/I glycerol, 50 g/l fumarate, 15 g/l yeast extract, 10 g/l $K_2HPO_4$, 1 g/I NaCl, 50ppm $MgCl_2{\cdot}6H_2O$, 10ppm $FeSo_4{\cdot}7H_2O$, and 5 g/I $Na_2CO_3$ at pH 7.0-7.6. Under the optimum condition, a succinate concentration of 153 g/I was produced in 36 h. The total volumetric production rate and the molar yield of succinate were 4.3 g/l/h and 85%, respectively.

  • PDF

음식폐기물을 이용한 혐기성 수소 발효 시 초기 운전 성능에 대한 열처리 효과 (Effect of Heat Treatment on the Start-up Performance for Anaerobic Hydrogen Fermentation of Food Waste)

  • 이채영;이세욱;황선진
    • 한국수소및신에너지학회논문집
    • /
    • 제22권6호
    • /
    • pp.765-771
    • /
    • 2011
  • This study was conducted to investigate the effect of heat treatment on the start-up performance for anaerobic hydrogen fermentation of food waste. The result showed that hydrogen production was $0.61{\pm}0.31$ mol $H_2$/mol hexose with heat-treatment of food waste at $70^{\circ}C$ for 60 min whereas it was $0.36{\pm}0.31$ mol $H_2$/mol hexose without heat-treatment of one. The heat treatment of food waste enhanced hydrogen yield due probably to the increase of hydrolysis as well as the decrease of non-hydrogen fermentation microorganisms. The removal efficiency of carbohydrate in reactors regardless of heat treatment of food waste maintained over 90%. The hydrogen conversion efficiency from food waste was 1.7-6.3% with heat-treatment whereas it was 0.7-4.5% without heat-treatment. At the time of switchover from batch to continuous operation, lactate concentration was high compared to the n-butyrate concentration in anaerobic hydrogen fermentation reactor without heat-treatment. Anaerobic hydrogen fermentation of food waste with heat treatment was stable in start-up periods because lactate concentration could be maintained at a relatively low compared to n-butyrate concentration due to the decrease of non-hydrogen fermentation microorganisms.

보리의 도정을 통한 바이오에탄올 생산성 향상 연구 (Improvement of the Bioethanol Productivity from Debranned Barley)

  • 전형진;김율;김신;정준성
    • 한국수소및신에너지학회논문집
    • /
    • 제29권6호
    • /
    • pp.648-653
    • /
    • 2018
  • Bran of barley causes high viscosity in bioethanol production due to the large amount of ${\beta}$-glucans and fiber. High viscosity is the main cause of decreased productivity and decreased facility efficiency in ethanol production. In order to prevent high viscosity, this study investigated the possibility of bioethanol from barley by debranning. As a result, it was able to reduced the viscosity (22.8 cP to 17.5 cP). And the fermentation speed and yield were improved as the activity of the enzyme and activity of yeast was also increased was improved due to the removal of non-fermentable components. In conclusion, debranning was advantageous in two ways. Firstly, bran removal increased the starch content of the feedstock and decreased viscosity of mash, improving ethanol fermentation. Secondly, by-products produced by debranning can use valuable products. It was remarkable results to the feasibility of bioethanol production from debranned barley.

탄소계 촉매를 이용한 프로판 분해 반응에 의한 수소 생산 (Hydorgen Production by Catalytic Decomposition of Propane Over Cabon-Based Catalyst)

  • 윤석훈;한기보;이종대;박노국;류시옥;이태진;윤기준;한귀영
    • Korean Chemical Engineering Research
    • /
    • 제43권6호
    • /
    • pp.668-674
    • /
    • 2005
  • 카본블랙을 이용한 프로판 분해는 메탄보다 분해가 용이하여 효과적인 수소생산방법으로 알려졌다. 특히, 프로판 직접 분해 반응에 의한 수소생산은 CO나 $CO_2$와 같은 부산물이 생성되지 않으므로 환경친화적인 수소 생산기술이다. 본 연구에서는 국내에서 상용화되어 시판되고 있는 활성탄 및 카본블랙을 탄소계 촉매로 사용하여 프로판 직접 분해반응특성을 조사하였다. 프로판의 직접 분해반응은 대기압 하, $500{\sim}1,000^{\circ}C$ 온도영역에서 실험이 수행되었으며, 프로판 분해반응에 의한 생성물로 수소뿐만 아니라 메탄, 에틸렌, 에탄, 프로필렌 등의 부산물의 생성이 확인되었다. 이러한 부산물들은 고온으로 갈수록 줄어들어 상대적으로 수소 수율이 증가함을 알 수 있었다. 다양한 상용촉매를 프로판 분해 반응에 적용하여 본 결과로서 DCC N330을 촉매로 이용하였을 경우, $750^{\circ}C$에서 22.47%의 수소 수율을 얻었다.

CGO 담지 귀금속 촉매를 이용한 DME 자열개질 특성 연구 (Experiment of DME autothermal reforming with CGO-based catalysts)

  • 최승현;배중면
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 춘계학술대회 초록집
    • /
    • pp.158.2-158.2
    • /
    • 2011
  • DME is acronym of dimethyl ether, which is spotlighted as an ideal fuel to produce hydrogen due to its high hydrogen/carbon ratio, high energy density and easiness to carry. In this research, we calculated thermodynamic hydrogen (or syngas) yield from DME autothermal reforming and compared to other fuels. The reforming efficiency was about 80% above $700^{\circ}C$. Lower OCR has higher reforming efficiency but, it requires additional heat supply since the reactions are endothermic. SCR has no significant effect on the reforming efficiency. The optimized condition is $700^{\circ}C$, SCR 1.5, OCR 0.45 without additional heat supply. Comparing to other commercial gaseous fuels (methane and propane), DME has higher selectivity of $H_2O$ and $CO_2$ than the others due to the oxygen atom in the molecule. To apply DME autothermal reforming to real system, a proper catalyst is required. Therefore, it is performed the experiment comparing various novel metal catalysts based on CGO. Experiments were performed at calculated condition. The composition of product was measured and reforming efficiency was calculated. The catalysts have similar efficiency at high temperature(${\sim}800^{\circ}C$) but, CGO-Ru has the highest efficiency at low temperature ($600^{\circ}C$).

  • PDF