• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.37-42
• /
• 2006

The effect of arc like streamer discharge is investigated on the hydrogen generation using the multineedle-plate electrode geometry plasma realtor(MPER) and the needle-plate electrode geometry plasma reactor(NPER). In order to restrict waves at the water surface when the high voltage applied, two kinds of the insulator such as the rectangular mesh or the hole mesh type are installed under the water surface. The discharge assistant of the two type(the saw type and the $TiO_2$ pellet type) was placed under the water surface to investigate the effect of the water surface conditions. The experimental results are compared in case of the reactor with and without the discharge assistant on the water surface.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.743-745
• /
• 2015

Amorphous cobalt phosphates were synthesized with their distinct morphology by controlling the amount of base in the synthetic condition. The crystallinity and morphology of cobalt phosphates were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The prepared cobalt phosphates were applied as a heterogeneous catalyst for generating hydrogen gas from the hydrolysis reaction of sodium borohydride. We found that the catalyst prepared using the least amount of base condition at room temperature showed a plate shape with less than 10 nm thickness, which resulted in the best catalytic activity among all catalysts due to the large surface area.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.996-1000
• /
• 2005

Experimental results are presented for the degradation of 3 nm-thick gate oxide $(SiO_2)$ under both Negative-bias Temperature Instability (NBTI) and Hot-carrier-induced (HCI) stresses using P and NMOSFETS, The devices are annealed with hydrogen or deuterium gas at high-pressure $(1\~5\;atm.)$ to introduce higher concentration in the gate oxide. Both interface trap and oxide bulk trap are found to dominate the reliability of gate oxide during electrical stress. The degradation mechanism depends on the condition of electrical stress that could change the location of damage area in the gate oxide. It was found the trap generation in the gate oxide film is mainly related to the breakage of Si-H bonds in the interface or the bulk area. We suggest that deuterium bonds in $SiO_2$ film are effective in suppressing the generation of traps related to the energetic hot carriers.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.184-190
• /
• 2014

Fuel cell power system, unlike conventional energy sources, converts chemical energy into electrical energy through electrochemical reaction of hydrogen and oxygen. In recent years, railway field as well as mobile fuel cell power system is being studying actively with development of hydrogen storage technologies. This paper presents the feasibility study on small-scale prototype electric railway vehicle application using fuel cell generation system. it is confirmed that proposed fuelcell-battery hybrid system shows good response characteristic about speed and torque based on design of parameter on system. Also as results of response for proposed system modeling, it show that powering mode and braking mode of system is controlled by switching devices of converters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.519-520
• /
• 2006

Research was performed to increase the efficiency of a plasma reactor for $H_2$ yield. In the preceding studies $H_2$ was increased by adding Ni as a transitional metal catalyst and $TiO_2$ as a photocatalyst. In these experiments, it was found that distilled water, discharge frequency, and electrode configuration had a significant impact on $H_2$ generation. A substantial amount of hydrogen yield was observed at 2 kHz of discharge frequency and 12 kV of applied voltage. Within this favorable discharge conditions, the weight rate of $TiO_2$ and Ni powders was investigated. Plasma phenomenon was measured by electrical, optical and acoustical devices. It was found that emitted light, electric current and acoustical signals acquired from the discharge demonstrated systematical correlation. Changing the electrode's configuration allowed discharge distribution along the perimeter of the electrode's tip, which increased the density of streamers and plasma energy loadings, as the value of inception voltage for the discharge propagation decreased.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.495-498
• /
• 2008

Photocatalytic water splitting into $H_2$ and $O_2$ using semiconductors has received much attention, especially for its potential application to direct production of $H_2$ for clean energy from water utilizing solar light energy. Since the report of Fujishima and Honda on the water splitting by photoelectrochemical cells, numerous different semiconducting materials have been used as photocatalysts for hydrogen generation from water. Among them, platinized titania significantly accelerates hydrogen production from water. For geometrical improvement of $TiO_2$ particle, porous $TiO_2$ structure was proposed and studied such as nanofiber, nanorod and nototubes. This research focuses on finding out the optimum temperature and electrolyte to produce $H_2$ by solar water splitting.

• Mycobiology
• /
• v.39 no.1
• /
• pp.64-66
• /
• 2011

Most fungi possess several hydrogen peroxide-generating enzymes, glucose oxidase and pyranose oxidase. Pyranose oxidase can use glucose as its substrate to generate hydrogen peroxide. White rot fungi, which degrade diverse recalcitrant compounds, contain lignin-degrading enzymes, and lignin peroxidase and manganese peroxidase require hydrogen peroxide for their enzymatic reactions. In this study, we isolated a cDNA fragment of pyranose oxidase from Phlebia tremellosa using PCR and examined its expression under the degradation conditions of diethylphthalate (DEP). Pyranose oxidase expression was enhanced up to 30% by the addition of DEP, and this result supports the possible involvement of pyranose oxidase in the degradation of recalcitrant compounds.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.383-386
• /
• 2007

This paper describes the design and integration of the wind- fuel cell hybrid system. The hybrid system components included a wind turbine, an electrolyzer (for generation of H2), a PEMFC (Proton Exchange Membrane Fuel Cell), storage system and BOP (Balance of Plant) system. The energy input is entirely provided by a wind turbine. A DC-DC converter controls the power input to the electrolyzer, which produces hydrogen and oxygen form water. The hydrogen used the fuel for the PEMFC. The hydrogen is compressed and stored in high pressure tank by hydrogen gas booster system.

• Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.192-196
• /
• 2008

The generation of high purity hydrogen from reformed hydrocarbon fuels, or syngas, is essential for efficient operation of the fuel cell (PEMFC, Polymer Electrolyte Membrane Fuel Cell). Usually, major components of reformed gas are $H_2$, CO, $CO_2$ and $H_2O$. Especially a major component, CO poisons the electrode of fuel cells. The water gas shifter (WGS) that shifts CO to $CO_2$ and simultaneously produces $H_2$, was developed to a two stage catalytic conversion process involving a high temperature shifter (HTS) and a low temperature shifter (LTS). Also, experiments were carried out to reduce the carbon monoxide up to $3{\sim}4%$ in the HTS and lower than 5,000 ppm via the LTS.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.3
• /
• pp.309-316
• /
• 2007

조합 및 고속탐색 실험 기법을 촉매 성분의 선정에 활용하였다. 소형 연료전지 작동을 위한 수소 생산에 가장 적합한 것으로 알려진 메탄을 산화 분해용 촉매의 특성을 적외선 화상 및 병렬형 반응 시스템으로 조사하였다. 반응의 모델을 먼저 제시하고 이를 근거로 Cu-Zn-Pd계 촉매를 선정하였다. 먼저 적외선 화상을 이용한 스크리닝을 위해서는 발열 효과라는 촉매 활성의 간접적인 현상을 보여줄 수 있는 적외선 민감 카메라를 이용하여 한 번에 50개의 시료 측정이 가능한 촉매 시료 배열을 설계하였다. 적외선 화상 결과로 높은 활성을 보이는 촉매 시료를 선정한 다음, 병렬형 반응 시스템과 단일 흐름 고정층 반응 시스템으로 선정된 촉매의 활성 특성을 조사 확인하였다. 본 연구에서 제시한 것과 같은 접근 방법으로 지속적으로 얻어진 결과를 반영하여 최적의 활성을 보이는 촉매 성분을 단기간에 찾아내고자 한다.