• 조명전기설비학회논문지
• /
• 제20권4호
• /
• pp.37-42
• /
• 2006

본 논문에서는$CO_2$를 발생시키지 않고 물로부터 직접 수소를 제조하기 위하여 비열플라즈마를 이용하였다. 다중침-평판형(Multineedle-plate electrode geometry reacto: MPER)과 단일침-평판형(Needle-plate electrode geometry reactor: NPER) 두종류의 수소제조 반응기를 설계 제작하여 수소 발생에 미치는 영향에 대하여 실험하였다. 수소발생을 높이기 위해서는 강한 아크성 스트리머 방전 발생과 효과적인 수표면 방전을 위한 수표면 조건을 고려해야만 된다.

• 공업화학
• /
• 제26권6호
• /
• pp.743-745
• /
• 2015

본 연구에서는 실온에서 간단히 염기의 양을 조절함으로서 세 가지 종류의 서로 다른 형태의 비결정질의 cobalt phosphate를 합성하였다. 합성된 샘플의 결정성과 형태를 X-Ray Diffraction (XRD)과, Scanning Electron Microscopy (SEM)를 통하여 확인하였으며, sodium borohydride의 수소발생 불균일 촉매로서 적용하였다. 촉매들 중에서 실온에서 합성한 비결정질의 cobalt phosphate 중에서 염기의 양이 가장 적은 10 nm 이하의 얇은 판상 형태의 촉매가 표면적이 넓어 가장 좋은 수소 발생 촉매활성을 보였다.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.996-1000
• /
• 2005

Experimental results are presented for the degradation of 3 nm-thick gate oxide $(SiO_2)$ under both Negative-bias Temperature Instability (NBTI) and Hot-carrier-induced (HCI) stresses using P and NMOSFETS, The devices are annealed with hydrogen or deuterium gas at high-pressure $(1\~5\;atm.)$ to introduce higher concentration in the gate oxide. Both interface trap and oxide bulk trap are found to dominate the reliability of gate oxide during electrical stress. The degradation mechanism depends on the condition of electrical stress that could change the location of damage area in the gate oxide. It was found the trap generation in the gate oxide film is mainly related to the breakage of Si-H bonds in the interface or the bulk area. We suggest that deuterium bonds in $SiO_2$ film are effective in suppressing the generation of traps related to the energetic hot carriers.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.184-190
• /
• 2014

Fuel cell power system, unlike conventional energy sources, converts chemical energy into electrical energy through electrochemical reaction of hydrogen and oxygen. In recent years, railway field as well as mobile fuel cell power system is being studying actively with development of hydrogen storage technologies. This paper presents the feasibility study on small-scale prototype electric railway vehicle application using fuel cell generation system. it is confirmed that proposed fuelcell-battery hybrid system shows good response characteristic about speed and torque based on design of parameter on system. Also as results of response for proposed system modeling, it show that powering mode and braking mode of system is controlled by switching devices of converters.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.519-520
• /
• 2006

Research was performed to increase the efficiency of a plasma reactor for $H_2$ yield. In the preceding studies $H_2$ was increased by adding Ni as a transitional metal catalyst and $TiO_2$ as a photocatalyst. In these experiments, it was found that distilled water, discharge frequency, and electrode configuration had a significant impact on $H_2$ generation. A substantial amount of hydrogen yield was observed at 2 kHz of discharge frequency and 12 kV of applied voltage. Within this favorable discharge conditions, the weight rate of $TiO_2$ and Ni powders was investigated. Plasma phenomenon was measured by electrical, optical and acoustical devices. It was found that emitted light, electric current and acoustical signals acquired from the discharge demonstrated systematical correlation. Changing the electrode's configuration allowed discharge distribution along the perimeter of the electrode's tip, which increased the density of streamers and plasma energy loadings, as the value of inception voltage for the discharge propagation decreased.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.495-498
• /
• 2008

Photocatalytic water splitting into $H_2$ and $O_2$ using semiconductors has received much attention, especially for its potential application to direct production of $H_2$ for clean energy from water utilizing solar light energy. Since the report of Fujishima and Honda on the water splitting by photoelectrochemical cells, numerous different semiconducting materials have been used as photocatalysts for hydrogen generation from water. Among them, platinized titania significantly accelerates hydrogen production from water. For geometrical improvement of $TiO_2$ particle, porous $TiO_2$ structure was proposed and studied such as nanofiber, nanorod and nototubes. This research focuses on finding out the optimum temperature and electrolyte to produce $H_2$ by solar water splitting.

• Mycobiology
• /
• 제39권1호
• /
• pp.64-66
• /
• 2011

Most fungi possess several hydrogen peroxide-generating enzymes, glucose oxidase and pyranose oxidase. Pyranose oxidase can use glucose as its substrate to generate hydrogen peroxide. White rot fungi, which degrade diverse recalcitrant compounds, contain lignin-degrading enzymes, and lignin peroxidase and manganese peroxidase require hydrogen peroxide for their enzymatic reactions. In this study, we isolated a cDNA fragment of pyranose oxidase from Phlebia tremellosa using PCR and examined its expression under the degradation conditions of diethylphthalate (DEP). Pyranose oxidase expression was enhanced up to 30% by the addition of DEP, and this result supports the possible involvement of pyranose oxidase in the degradation of recalcitrant compounds.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.383-386
• /
• 2007

This paper describes the design and integration of the wind- fuel cell hybrid system. The hybrid system components included a wind turbine, an electrolyzer (for generation of H2), a PEMFC (Proton Exchange Membrane Fuel Cell), storage system and BOP (Balance of Plant) system. The energy input is entirely provided by a wind turbine. A DC-DC converter controls the power input to the electrolyzer, which produces hydrogen and oxygen form water. The hydrogen used the fuel for the PEMFC. The hydrogen is compressed and stored in high pressure tank by hydrogen gas booster system.

• Environmental Engineering Research
• /
• 제13권4호
• /
• pp.192-196
• /
• 2008

The generation of high purity hydrogen from reformed hydrocarbon fuels, or syngas, is essential for efficient operation of the fuel cell (PEMFC, Polymer Electrolyte Membrane Fuel Cell). Usually, major components of reformed gas are $H_2$, CO, $CO_2$ and $H_2O$. Especially a major component, CO poisons the electrode of fuel cells. The water gas shifter (WGS) that shifts CO to $CO_2$ and simultaneously produces $H_2$, was developed to a two stage catalytic conversion process involving a high temperature shifter (HTS) and a low temperature shifter (LTS). Also, experiments were carried out to reduce the carbon monoxide up to $3{\sim}4%$ in the HTS and lower than 5,000 ppm via the LTS.

• 한국수소및신에너지학회논문집
• /
• 제18권3호
• /
• pp.309-316
• /
• 2007

조합 및 고속탐색 실험 기법을 촉매 성분의 선정에 활용하였다. 소형 연료전지 작동을 위한 수소 생산에 가장 적합한 것으로 알려진 메탄을 산화 분해용 촉매의 특성을 적외선 화상 및 병렬형 반응 시스템으로 조사하였다. 반응의 모델을 먼저 제시하고 이를 근거로 Cu-Zn-Pd계 촉매를 선정하였다. 먼저 적외선 화상을 이용한 스크리닝을 위해서는 발열 효과라는 촉매 활성의 간접적인 현상을 보여줄 수 있는 적외선 민감 카메라를 이용하여 한 번에 50개의 시료 측정이 가능한 촉매 시료 배열을 설계하였다. 적외선 화상 결과로 높은 활성을 보이는 촉매 시료를 선정한 다음, 병렬형 반응 시스템과 단일 흐름 고정층 반응 시스템으로 선정된 촉매의 활성 특성을 조사 확인하였다. 본 연구에서 제시한 것과 같은 접근 방법으로 지속적으로 얻어진 결과를 반영하여 최적의 활성을 보이는 촉매 성분을 단기간에 찾아내고자 한다.