• Journal of Korea Water Resources Association
• /
• v.52 no.6
• /
• pp.397-409
• /
• 2019

Gate operation of hydraulic structures is important for proper management in rivers. In this study, the characteristics of flood time were analyzed and predicted using the HEC-RAS model, which is capable of one-dimensional and two-dimensional connectivity analysis of the main points downstream of the Geum river. As a result, flood travel time was decreased once discharge increase and downstream water level rising. However, When the floodplain was overflowed, the arrival time increased due to the rapid increase of the river width. Also, the same condition, flood wave travel time at the major point was approximately twice as fast as water level rising travel time, indicating that waves progressed faster than actually water. Using the results of this study, it will be helpful in the river.

• Journal of Climate Change Research
• /
• v.9 no.2
• /
• pp.143-156
• /
• 2018

Evapotranspiration is a key element in designing and operating agricultural hydraulic structures. The profound effect of climate change to local agro-hydrological systems makes it inevitable to study the potential variability in evapotranspiration rate in order to develop policies on future agricultural water management as well as to evaluate changes in agricultural environment. The APEX-Paddy model was used to simulate local evapotranspiration responses to climate change scenarios. Nine Global Climate Models(GCMs) downscaled using a non-parametric quantile mapping method and a Multi?Model Ensemble method(MME) were used for an uncertainty analysis in the climate scenarios. Results indicate that APEX-Paddy and the downscaled 9 GCMs reproduce evapotranspiration accurately for historical period(1976~2005). For future periods, simulated evapotranspiration rate under the RCP 4.5 scenario showed increasing trends by -1.31%, 2.21% and 4.32% for 2025s(2011~2040), 2055s(2041~2070) and 2085s(2071~2100), respectively, compared with historical(441.6 mm). Similar trends were found under the RCP 8.5 scenario with the rates of increase by 0.00%, 4.67%, and 7.41% for the near?term, mid?term, and long?term periods. Monthly evapotranspiration was predicted to be the highest in August, July was the month having a strong upward trend while. September and October were the months showing downward trends in evapotranspiration are mainly resulted from the shortening of the growth period of paddy rice due to temperature increase and stomatal closer as ambient $CO_2$ concentration increases in the future.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.3
• /
• pp.5-14
• /
• 2019

This study attempted to study the soil erosion dynamic in the Bagmati Basin of Nepal. In this study, an inclusive methodology that combines Revised Universal Soil Loss Equation (RUSLE) and GIS techniques was adopted to determine the distribution of soil loss in the study basin. As well, this study attempts to study the intensity of soil erosion in the seven different land use patterns in the Bagmati Basin. Soil loss is an associated phenomenon of hydrologic cycle and this dynamic phenomenon possesses threats to sustainability of basin hydrology, agriculture system, hydraulic structures in operation and overall ecosystem in a long run. Soil conservation works, and various planning and design of watersheds works demands quantification of soil loss. The results of the study in Bagmati Basin shows the total annual soil loss in the basin is 22.93 million tons with an average rate of 75.83T/ha/yr. The computed soil loss risk was divided into five classes from tolerable to severe and the spatial pattern was mapped for easy interpretation. Also, evaluation of soil loss in different land use categories shows barren area has highest rate of soil loss followed by agriculture area. This is a preliminary work and provides erosion risk scenario in the basin. The study can be further used for strategic planning of land use and hydrologic conservation works in a basin.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.317-317
• /
• 2015

강이나 하천에 이수 및 치수의 목적으로 소규모 댐이나 보 등의 수리구조물을 설치한다. 수리구조물의 상하류부에는 하천 하상의 극심한 침식인 국부세굴현상을 방지하여 수리구조물의 안정성을 확보하기 위해 하상보호구조물을 설치하는데, 특히 하류부에 설치하는 하상보호구조물에는 크게, 다양한 형식과 크기의 물받이공, 에너지 감세공, 그리고 끝턱구조물 등이 이에 속한다. 지금까지 국내 외 수리구조물 설계지침에서는 하상보호공의 적절한 길이규모를 산정하기 위한 다양한 공식이 개발 및 적용되었지만, 최근 들어 다양한 목적을 위해 복잡해진 수리구조물의 형식과 다양한 운영방식에 따른 수리학적 분석내용이 적절하게 반영되지 않은 경험공식이 대부분 적용되었다. 따라서 예상보다 매우 큰 하상유실이 발생 하여, 하상보호구조물의 설치역할을 제대로 수행하지 못하고 오히려 수리구조물의 안정성에 위협을 주는 주요한 요인이 되었다. 그리고 최근 국내에는 4 대강 유역에 16개 중 대규모의 다목적 보가 설치되었으나 앞서 언급한 바와 같이 미흡한 설계지침을 기반으로 설치된 보 및 하상보호구조물의 기능이 저하되어 극심한 세굴현상이 발생하였다. 또한 이를 보강하기 위한 추가적인 공사 등으로 경제적인 손실을 야기하였다. 반면 외국의 최근 설계지침에는 하상보호구조물 하류부에서 발생하는 평형최대세굴심의 규모를 고려하거나 흐름 및 난류분포를 고려한 수리학적 분석이 반영되어 있지만 국내 설계지침에는 전무한 실정이다. 따라서 본 연구에서는 기존 국내 설계지침의 한계를 조사하고 현재 외국에서 적절하게 제안되어 적용 중인 하상보호구조물 설계지침을 검토하였다. 특히 수리학적 거동특성과 유사분포 특성이 고려된 최대세굴심 산정공식과 설계지침을 검토하였고, 평형상태에 도달한 세굴공 내에서의 수리학적 특성을 고려하여 하상보호구조물의 길이를 적절히 산정할 수 있는 기존 연구결과를 토대로, 하상보호구조물 길이 산정공식을 제안하였다. 본 연구에서 검토된 외국 설계지침과 함께 수리학적 거동특성이 고려된 하상보호구조물의 길이 산정공식은, 향후 수리구조물의 안정성 확보를 위한 하상보호구조물의 설계에 반영될 필요가 있으며, 이를 통해 수리구조물의 효율적이고 경제적인 유지관리를 위해 적절히 활용될 수 있다.

• Advances in nano research
• /
• v.13 no.1
• /
• pp.97-111
• /
• 2022

In the present article, silica nanoparticles (SNPs) were exploited to improve the tribological and mechanical properties of vinyl ester/glass fiber composites. To the best of our knowledge, there hasn't been any prior study on the wear properties of glass fiber reinforced vinyl ester SiO₂ nanocomposites. The wear resistance is a critical concern in many industries which needs to be managed effectively to reduce high costs. To examine the influence of SNPs on the mechanical properties, seven different weight percentages of vinyl ester/nano-silica composites were initially fabricated. Afterward, based on the tensile testing results of the silica nanocomposites, four wt% of SNPs were selected to fabricate a ternary composite composed of vinyl ester/glass fiber/nano-silica using vacuum-assisted resin transfer molding. At the next stage, the tensile, three-point flexural, Charpy impact, and pin-on-disk wear tests were performed on the ternary composites. The fractured surfaces were analyzed by scanning electron microscopy (SEM) images after conducting previous tests. The most important and interesting result of this study was the development of a nanocomposite that exhibited a 52.2% decrease in the mean coefficient of friction (COF) by augmenting the SNPs, which is beneficial for the fabrication/repair of composite/steel energy pipelines as well as hydraulic and pneumatic pipe systems conveying abrasive materials. Moreover, the weight loss due to wearing the ternary composite containing one wt% of SNPs was significantly reduced by 70%. Such enhanced property of the fabricated nanocomposite may also be an important design factor for marine structures, bridges, and transportation of wind turbine blades.

• Coupled systems mechanics
• /
• v.11 no.4
• /
• pp.315-333
• /
• 2022

Fluid-Structure Interaction (FSI) modeling is highly effective to reveal deformations, fatigue failures, and stresses on a solid domain caused by the fluid flow. Mechanical properties of the solid structures and the thermophysical properties of fluids can change under different operating conditions. In this study, we investigated the interaction of [45/-45]₂ wounded composite tubes with the fluid flows suddenly pressurized to 5 Bar, 10 Bar, and 15 Bar at the ambient temperatures of 24℃, 66℃, and 82℃, respectively. Numerical analyzes were performed under each temperature and pressure condition and the results were compared depending on the time in a period and along the length of the tube. The main purpose of this study is to present the effects of the variations in fluid characteristics by temperature and pressure on the structural response. The variation of the thermophysical properties of the fluid directly affects the deformation and stress in the material due to the Wall Shear Stress (WSS) generated by the fluid flow. The increase or decrease in WSS directly affected the deformations. Results show that the increase in deformation is more than 50% between 5 Bar and 10 Bar for the same operating condition and it is more than 100% between 5 Bar and 15 Bar by the increase in pressure, as expected in terms of the solid mechanics. In the case of the increase in the temperature of fluid and ambient, the WSS and Von Mises stress decrease while the slight increases of deformations take place on the tube. On the other hand, two-way FSI modeling is needed to observe the effects of hydraulic shock and developing flow on the structural response of composite tubes.

• Steel and Composite Structures
• /
• v.44 no.3
• /
• pp.353-369
• /
• 2022

This study attempts to shed light on the coupled impact of types of loading, thickness stretching, and types of variation of Winkler-Pasternak foundations on the flexural behavior of simply- supported FG plates according to the new quasi-3D high order shear deformation theory, including integral terms. A new function sheep is used in the present work. In particular, both Winkler and Pasternak layers are non-uniform and vary along the plate length direction. In addition, the interaction between the loading type and the variation of Winkler-Pasternak foundation parameters is considered and involved in the governing equilibrium equations. Using the virtual displacement principle and Navier's solution technique, the numerical results of non-dimensional stresses and displacements are computed. Finally, the non-dimensional formulas' results are validated with the existing literature, and excellent agreement is detected between the results. More importantly, several complementary parametric studies with the effect of various geometric and material factors are examined. The present analytical model is suitable for investigating the bending of simply-supported FGM plates for special technical engineering applications.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.9
• /
• pp.53-67
• /
• 2022

Micropiles are cast-in-place-type piles with small diameters. They are widely used for the foundation reinforcement of existing buildings and structures because this technique is easy to construct and economic. A base expansion structure is developed following the mechanism of radial expansion at the pile tip under compression. Numerical analysis, durability tests, and centrifuge tests have been conducted using the base expansion structure. In this study, three-dimensional numerical modeling was performed to describe the behavioral mechanism of the base expansion structure using steel bar penetration under compressive loading, and numerical analyses using centrifuge test conditions were performed for the comparative studies. Additionally, the base structure was modified based on the results of lab-scale analyses, and the bearing capacities of micropiles were compared using field-scale numerical analyses under various ground conditions.

• Geomechanics and Engineering
• /
• v.29 no.5
• /
• pp.567-582
• /
• 2022

In the present study, a series of physical experiments and numerical simulations were conducted to investigate the effects of mode I and mixed-mode I/II cracks on the fracture modes and stability of roadway tunnel models. The experiments and simulations incorporated different inclination angle flaws under both static and dynamic loads. The quasi-static and dynamic testing were conducted by using an electro-hydraulic servo control device and drop weight impact system (DWIS), and the failure process was simulated by using rock failure process analysis (RFPA) and AUTODYN software. The stress intensity factor was also calculated to evaluate the stability of the flawed roadway tunnel models by using ABAQUS software. According to comparisons between the test and numerical results, it is observed that for flawed roadways with a single radical crack and inclination angle of 45°, the static and dynamic stability are the lowest relative to other angles of fractured rock masses. For mixed-mode I/II cracks in flawed roadway tunnel models under dynamic loading, a wing crack is produced and the pre-existing cracks increase the stress concentration factor in the right part of the specimen, but this factor will not be larger than the maximum principal stress region in the roadway tunnel models. Additionally, damage to the sidewalls will be involved in the flawed roadway tunnel models under static loads.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.519-528
• /
• 2006

In the construction of hydraulic structures deciding a design flood is one of the most important works. It should be especially noted that the time distribution of the design rainfall method makes a significant effect on the results of the design flood. Thus, choosing an appropriate time distribution method for the design rainfall is a very important process. In recent years, Huff's method is usually used in Korea. This method presents dimensionless rainfall-time cumulative curves, which are made through the analyses of storm data. In this study, the annual maximum rainfall data, from 1961 to 2004 were analyzed to make the dimensionless rainfall-time cumulative curves and hyetographs in Seoul. The results were compared with the "Regional Time Distribution of the Design Rainfall", (KICT, 1989 and MCT, 2000). As a result, the dimensionless rainfall-time cumulative curves are smoother than Huff's results when the duration of an annual maximum rainfall is short. In addition, the curves are similar with the Huff's results as the duration is longer.