Browse > Article
http://dx.doi.org/10.12989/csm.2022.11.4.315

Investigation of a fiber reinforced polymer composite tube by two way coupling fluid-structure interaction  

Daricik, Fatih (Department of Mechanical Engineering, Alanya Alaaddin Keykubat University)
Canbolat, Gokhan (Department of Mechanical Engineering, Alanya Alaaddin Keykubat University)
Koru, Murat (Department of Mechanical Engineering, Isparta University of Applied Sciences)
Publication Information
Coupled systems mechanics / v.11, no.4, 2022 , pp. 315-333 More about this Journal
Abstract
Fluid-Structure Interaction (FSI) modeling is highly effective to reveal deformations, fatigue failures, and stresses on a solid domain caused by the fluid flow. Mechanical properties of the solid structures and the thermophysical properties of fluids can change under different operating conditions. In this study, we investigated the interaction of [45/-45]2 wounded composite tubes with the fluid flows suddenly pressurized to 5 Bar, 10 Bar, and 15 Bar at the ambient temperatures of 24℃, 66℃, and 82℃, respectively. Numerical analyzes were performed under each temperature and pressure condition and the results were compared depending on the time in a period and along the length of the tube. The main purpose of this study is to present the effects of the variations in fluid characteristics by temperature and pressure on the structural response. The variation of the thermophysical properties of the fluid directly affects the deformation and stress in the material due to the Wall Shear Stress (WSS) generated by the fluid flow. The increase or decrease in WSS directly affected the deformations. Results show that the increase in deformation is more than 50% between 5 Bar and 10 Bar for the same operating condition and it is more than 100% between 5 Bar and 15 Bar by the increase in pressure, as expected in terms of the solid mechanics. In the case of the increase in the temperature of fluid and ambient, the WSS and Von Mises stress decrease while the slight increases of deformations take place on the tube. On the other hand, two-way FSI modeling is needed to observe the effects of hydraulic shock and developing flow on the structural response of composite tubes.
Keywords
computational fluid dynamics; deformation; Fiber Reinforced Polymer Composite (FRPC); fluid-structure interaction; wall shear stress;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 ANSYS (2013), Ansys Fluent Theory Guide, PA, 15317.
2 Boujleben, A., Ibrahimbegovic, A. and Lefrancois, E. (2020), "An efficient computational model for fluid-structure interaction in application to large overall motion of wind turbine with flexible blades", Appl. Math. Model., 77, 392-407. https://doi.org/10.1016/j.apm.2019.07.033.   DOI
3 Munson, B.R., Young, D.F. and Okiishi, T.H. (1995), "Fundamentals of fluid mechanics", Oceanograph. Literat. Rev., 10(42), 831.
4 Burecek, A., Hruzik, L. and Vasina, M. (2015), "Simulation of accumulator influence on hydraulic shock in long pipe", Manuf. Indus. Eng., 14(1-2), 1-4. https://doi.org/10.12776/mie.v14i1-2.461.   DOI
5 Canbolat, G., Yildizeli, A., Kose, H.A. and Cadirci, S. (2020), "Numerical investigation of hydrodynamic and thermal boundary layer flows over a flat plate and transition control", Int. J. Adv. Eng. Pure Sci., 32(4), 390-397. https://doi.org/10.7240/jeps.636786.   DOI
6 Cengel, Y.A. and Cimbala, J.M. (2006), Fluid Mechanics Fundamentals and Applications, HillHigher Education, Boston.
7 Daricik, F., Delibas, H., Canbolat, G. and Topcu, A. (2021), "Effects of short-term thermal aging on the fracture behavior of 3D-printed polymers", J. Mater. Eng. Perform., 30(12), 8851-8858. https://doi.org/10.1007/s11665-021-06374-z.   DOI
8 Elfaki, M., Nasif, M.S. and Muhammad, M. (2021), "Effect of changing crude oil grade on slug characteristics and flow induced mechanical stresses in pipes", Appl. Sci., 11(11), 5215. https://doi.org/10.3390/app11115215.   DOI
9 Etli, M., Canbolat, G., Karahan, O. and Koru, M. (2021), "Numerical investigation of patient-specific thoracic aortic aneurysms and comparison with normal subject via Computational Fluid Dynamics (CFD)", Med. Biolog. Eng. Comput., 59(1), 71-84. https://doi.org/10.1007/s11517-020-02287-6.   DOI
10 Gorman, D.G., Reese, J.M. and Zhang, Y.L. (2000), "Vibration of a flexible pipe conveying viscous pulsating fluid flow", J. Sound Vib., 230(2), 379-392. https://doi.org/10.1006/jsvi.1999.2607.   DOI
11 Hadzalic, E., Ibrahimbegovic, A. and Dolarevic, S. (2018a), "Failure mechanisms in coupled soil-foundation systems", Couple. Syst. Mech., 7(1), 27-42. https://doi.org/10.12989/csm.2018.7.1.027.   DOI
12 Hadzalic, E., Ibrahimbegovic, A. and Dolarevic, S. (2018b), "Fluid-structure interaction system predicting both internal pore pressure and outside hydrodynamic pressure", Couple. Syst. Mech., 7(6), 649-668. https://doi.org/10.12989/csm.2018.7.6.649.   DOI
13 Hruzik, L., Burecek, A. and Vasina, M. (2014), "Non-stationary flow of hydraulic oil in long pipe", EPJ Web Conf., 67, 1-5. https://doi.org/10.1051/epjconf/20146702042.   DOI
14 Haghani, A., Jahangiri, M., Yadollahi Farsani, R., Khosravi Farsani, A. and Fazilatmanesh, J. (2021), "Transient fluid-solid interaction and heat transfer in a cavity with elastic baffles mounted on the sidewalls", Math. Prob. Eng., 2021, Article ID 8842898. https://doi.org/10.1155/2021/8842898.   DOI
15 Hawa, A., Majid, M.A., Afendi, M., Marzuki, H.F.A., Amin, N.A.M., Mat, F. and Gibson, A.G. (2016), "Burst strength and impact behaviour of hydrothermally aged glass Fibre/Epoxy composite pipes", Mater. Des., 89, 455-464. https://doi.org/10.1016/j.matdes.2015.09.082.   DOI
16 Heinsbroek, A.G.T.J. (1997), "Fluid-structure interaction in non-rigid pipeline systems", Nucl. Eng. Des., 172(1-2), 123-135. https://doi.org/10.1016/s0029-5493(96)01363-5.   DOI
17 Hughes, T.J., Liu, W.K. and Zimmermann, T.K. (1981), "Lagrangian-Eulerian finite element formulation for incompressible viscous flows", Comput. Meth. Appl. Mech. Eng., 29(3), 329-349. https://doi.org/10.1016/0045-7825(81)90049-9.   DOI
18 Zhu, H., Zhang, W., Feng, G. and Qi, X. (2014), "Fluid-structure interaction computational analysis of flow field, shear stress distribution and deformation of three-limb pipe", Eng. Fail. Anal., 42, 252-262. https://doi.org/10.1016/j.engfailanal.2014.04.021.   DOI
19 You, J.H. and Inaba, K. (2013), "Fluid-structure interaction in water-filled thin pipes of anisotropic composite materials", J. Fluid. Struct., 36, 162-173. https://doi.org/10.1016/j.jfluidstructs.2012.08.010.   DOI
20 Li, S., Karney, B.W. and Liu, G. (2015), "FSI research in pipeline systems-A review of the literature", J. Fluid. Struct., 57, 277-297. https://doi.org/10.1016/j.jfluidstructs.2015.06.020.   DOI
21 Yu, K., Morozov, E.V., Ashraf, M.A. and Shankar, K. (2015), "Numerical analysis of the mechanical behaviour of reinforced thermoplastic pipes under combined external pressure and bending", Composite Structures, 131, 453-461. https://doi.org/10.1016/j.compstruct.2015.05.033.   DOI
22 Tomblin, J., Sherraden, J., Seneviratne, W. and Raju, K.S. (2002), "Advanced general aviation transport experiments. A-Basis and B-Basis design allowables for epoxy-based prepreg Toray T700GC-12K-31E/# 2510 unidirectional tape", National Institute for Aviation Research Wichita State University, Wichita, Kansas, 23.
23 Loh, S.K., Faris, W.F. and Hamdi, M. (2013), "Fluid-structure interaction simulation of transient turbulent flow in a curved tube with fixed supports using LES", Prog. Comput. Fluid Dyn., 13(1), 11-19. https://doi.org/10.1504/PCFD.2013.050646.   DOI
24 Majid, M.A., Assaleh, T.A., Gibson, A.G., Hale, J.M., Fahrer, A., Rookus, C.A.P. and Hekman, M. (2011), "Ultimate Elastic Wall Stress (UEWS) Test of Glass Fibre Reinforced Epoxy (GRE) pipe", Compos. Part A: Appl. Sci. Manuf., 42(10), 1500-1508. https://doi.org/10.1016/j.compositesa.2011.07.001.   DOI
25 Mustafa, M.A., Abdullah, A.R., Hasan, W.K., Habeeb, L.J. and Nassar, M.F. (2021), "Two-way fluid-structure interaction study of twisted tape insert in a circular tube having integral fins with nanofluid", East.-Eur. J. Enterp. Technol., 3, 25-34. https://doi.org/10.15587/1729-4061.2021.234125.   DOI
26 Wang, C., Sun, M., Shankar, K., Xing, S. and Zhang, L. (2018), "CFD simulation of vortex induced vibration for FRP composite riser with different modeling methods", Appl. Sci., 8(5), 1-18. https://doi.org/10.3390/app8050684.   DOI
27 Wang, C., Ge, S., Sun, M., Jia, Z. and Han, B. (2019), "Comparative study of vortex-induced vibration of FRP composite risers with large length to diameter ratio under different environmental situations", Appl. Sci., 9(3), 517. https://doi.org/10.3390/app9030517.   DOI