• 제목/요약/키워드: hydraulic connectivity

검색결과 33건 처리시간 0.026초

The influence of fine particle migration on pore structure of overlying ballast under cyclic loading

  • Yu Ding;Yu Jia;Zhongling Zong;Xuan Wang;Jiasheng Zhang;Min Ni
    • Geomechanics and Engineering
    • /
    • 제35권6호
    • /
    • pp.627-636
    • /
    • 2023
  • The essence of subgrade mud pumping under train load is the migration of fine particles in subgrade soil. The migration of fine particles will change the pore structure of overlying ballast, thus affecting the mechanical properties and hydraulic properties of ballast layer. It is of great theoretical significance and engineering value to study the effect of fine particle migration on the pore structure of ballast layer under cyclic loading. In this paper, a tailor-made subgrade mud pumping test model and an X-ray computed tomography (CT) scanning equipment were used to study the influence of migration of fine particles in subgrade soil on the pore parameters (plane porosity, volume porosity, pore distribution and pore connectivity) of overlying ballast under cyclic loading. The results show that the compression of ballast pores and the blockage of migrated fine particles make the porosity of ballast layer decreases gradually. And the percentage of small pores in ballast layer increases, while the percentage of large pores decreases; the connectivity of pores also gradually decreases. Based on the test results, an empirical model of ballast porosity evolution under cyclic loading is established and verified.

다단계 수압파쇄균열 전파 모델링 연구 (Modeling of Multi-Stage Hydraulic Fracture Propagation)

  • 장영호;성원모
    • 한국가스학회지
    • /
    • 제19권5호
    • /
    • pp.13-19
    • /
    • 2015
  • 본 연구에서는 보다 현실적인 파쇄균열 전파를 묘사하기 위해 수압파쇄균열 전파 모델을 개발하였다. 이 모델에서는 두 가지 균열 전파 기준을 적용하였다. 첫 번째는 균열의 발생각을 결정하기 위한 최대 접선응력 기준과 두 번째는 파쇄균열의 자연균열 통과 여부 기준이다. 본 모델의 검증 결과, 수압파쇄균열이 자연균열을 통과하는 양상이 실험값과 동일함을 확인하였다. 균열의 전파에 직접적인 영향을 미치는 요소인 최대수평응력 방향, 균열면의 마찰계수, 자연균열의 방향성에 대한 민감도 분석 결과, 이론적 기준에 적합하게 균열의 전파 방향과 통과 여부가 결정되는 것으로 나타났다. 기존의 수직 판형 균열 전파 모델과 본 모델을 비교하여 균열의 연결성과 유정 자극부피 측면에서 차이가 있음을 확인하였다.

상수도관망 수원-절점 최소거리와 에너지 지표 상관성 분석 (Correlation analysis between energy indices and source-to-node shortest pathway of water distribution network)

  • 이승엽;정동휘
    • 한국수자원학회논문집
    • /
    • 제51권11호
    • /
    • pp.989-998
    • /
    • 2018
  • 수원과 수용가 간 연결성은 비정상상황 시 상수도관망의 기능 유지 정도를 나타내는 시스템 특성 중 하나이다. 상수도관망은 점과 선으로 구성된 그래프로 간략화 될 수 있기 때문에, 연결성 평가를 위해 주로 그래프 이론이 적용되었다. 하지만, 대부분의 연구는 상수도관망에 적합하지 않은 무향-비가중 그래프 이론을 적용하였다. 본 연구에서는 유향-가중 그래프 이론을 상수도관망에 적용하였으며, 이를 기반으로 복잡한 수리해석 없이 상수도관망 연결성을 평가할 수 있는 지표인 SNSP (Source to Node Shortest Pathway)와 이의 역수인 SNSP-Degree (SNSP-D)를 제안하였다. 국내 J시 42개의 상수도관망을 이용하여 개발된 SNSP와 기존 상수도관망 성능평가지표 사이의 상관성 분석을 수행 및 검증하였다. 기존 상수도관망 성능평가지표는 수리해석 결과를 지표 계산에 이용하는 3개의 회복력(Resilience) 지표와 에너지 효율 지표이다. 분석 결과, SNSP의 역수인 SNSP-D의 합과 기존 상수도관망 성능지표 사이에 평균적으로 0.87 이상의 높은 피어슨 상관계수(Pearson Correlation Coefficient, PCC) 값이 도출되었다. 특히, 회복력 지표 중 하나인 Modified Resilience Index (MRI)와 에너지 효율 지표의 경우 PCC 0.93 이상의 높은 상관관계를 가지는 것으로 나타났다. 또한 다중 회귀 분석을 통해 SNSP-D와 회복력 및 에너지 효율 간의 상관성에 영향을 미치는 수리학적 변인을 확인하였다. 본 연구에서 제안한 SNSP 지표가 상수도관망의 대략적인 회복력 및 에너지 효율 수준을 알려줄 수 있는 지표로 실무에서 널리 활용될 것으로 기대된다.

안성천 수계 국가하천구간 하상 수리전도도 측정 시험 (Measurement of Streambed Hydraulic Conductivity in Stream Sections in the Anseongcheon Watershed, Korea)

  • 전선금;이일훈;이정우;정일문;홍성훈
    • 지질공학
    • /
    • 제27권4호
    • /
    • pp.377-382
    • /
    • 2017
  • 안성천 수계 하류부 국가하천구간내 15개 지점에 대해 하상퇴적층의 수리전도도 측정 시험을 수행하였다. 각 지점별로 하상퇴적층에 시피지미터와 피조미터를 설치하여 하천수-지하수 상호교환량과 수리경사를 측정하고 이를 Darcy 공식에 대입하여 연직방향 수리전도도를 산정하였다. 하천수-지하수 교환량은 $4.08{\times}10^{-6}{\sim}1.49{\times}10^{-5}m/s$, 연직방향 수리경사는 0.005에서 0.145로 측정되었고, 하상수리전도도는 $7.80{\times}10^{-5}{\sim}1.58{\times}10^{-3}m/s$로 산정되어 하천구간별, 지점별로 하천과 대수층간에 연결성의 큰 차이를 나타내었다. 하천과 대수층간의 수리적 상호연결성을 정량적으로 파악하고 지하수개발 이용이 하천수량에 미치는 영향을 평가하기 위해서는 하상퇴적층 수리전도도와 같이 하천과 대수층간 연결부의 수리지질학적 조사가 필요하며, 현장시험 및 분석 방법에 대한 기술적 향상이 이뤄져야 할 것이다.

A modularized numerical framework for the process-based total system performance assessment of geological disposal systems

  • Kim, Jung-Woo;Jang, Hong;Lee, Dong Hyuk;Cho, Hyun Ho;Lee, Jaewon;Kim, Minjeong;Ju, Heejae
    • Nuclear Engineering and Technology
    • /
    • 제54권8호
    • /
    • pp.2828-2839
    • /
    • 2022
  • This study developed a safety assessment tool for geological disposal systems called APro, a systemically integrated modeling system based on modularizing and coupling the processes which need to be considered in a geological disposal system. Thermal, hydraulic, chemical, canister failure, radionuclide release and transport processes were considered in the current version of APro. Each of the unit processes in APro consists of a single Default Module, and several Alternative Modules which can increase the flexibility of the model. As an initial stage of developing the modularization concept and modeling interface, the Default Modules of each unit process were described, with one Alternative Module of chemical process. The computation part of APro is mainly a MATLAB workspace controlling COMSOL and PHREEQC, which are coupled by an operator splitting scheme. The APro model domain is a stylized geological disposal system employing the Swedish disposal concept (KBS-3 type), but the repository layout can be freely adjusted. In order to show the applicability of APro to the total system performance assessment of geological disposal system, some sample simulations were conducted. From the results, it was confirmed that coupling of the thermal and hydraulic processes and coupling of the canister failure and the radionuclide release processes were well reflected in APro. In addition, the technical connectivity between COMSOL and PHREEQC was also confirmed.

삼차원 불연속면 연결망을 이용한 암반의 등가수리전도도 결정에 대한 연구 (Determination of Equivalent Hydraulic Conductivity of Rock Mass Using Three-Dimensional Discontinuity Network)

  • 방상혁;전석원;최종근
    • 터널과지하공간
    • /
    • 제13권1호
    • /
    • pp.52-63
    • /
    • 2003
  • 단층, 균열, 절리 등의 암반 내에 존재하는 수많은 불연속면은 암반의 역학적\ulcorner수리적 특성을 좌우하는 중요한 요소이다. 암반 내 지하수 유동에 큰 영향을 미치는 요소는 불연속면의 발생빈도와 기하학적 특성 그리고 불연속면 상호간의 연결성이라고 할 수 있다. 이 연구에서는 불연속면의 특성인 발생빈도, 크기, 방향, 간극의 크기 등의 분포함수를 가정하여 3차원 불연속면 연결망 내에서 지하수 유동 해석을 실시하는 프로그램을 작성하였다. 이 프로그램은 3차원 상에 불연속면을 발생시키고 불연속면간 연결성을 분석하여 수리해석을 실시한다. 이 프로그램을 통해 수리해석을 실시한 결과, 컴퓨터 메모리의 한계로 인해 대상지역의 대표요소체적을 정확하게 결정할 수는 없었지만, 대략 25$\times$25$\times$25 ㎥ 이상에서 결정될 것으로 추정할 수 있었다. 지하수 유동해석에 영향을 미치는 간극의 범위를 계산한 결과, 불연속면 평균 간극의 30% 이하의 간극을 갖는 불연속면은 지하수 유동에 미치는 영향이 미미한 것으로 나타났다. 또, 경계효과를 고려한 경우와 그렇지 않은 경우의 등가수리전도도의 차이는 거의 없었으며 이는 대상지역에서 간극이 큰 일부의 불연속면을 통한 유동이 전체적인 지하수 유동에 크게 영향을 주기 때문인 것으로 판단되었다. 입력자료 중에서 암반의 등가수리전도도에 영향을 미치는 요소의 중요도는 불연속면의 길이, 간극, 방향의 순서로 나타났다. 대상 암반에 단층면이 존재할 경우, 등가수리전도도는 단층면에 평행한 방향의 요소는 증가하며 이에 수직인 방향의 요소는 약간 증가하다 수렴하는 경향을 보였다.openyl methyl disulfide와 (E)-propenyl methyl disulfide 또한 동결건조 양파에서 증가되어 짐을 확인하였다. 올그루밀이 가장 많았다. Niacin함량은 탑동밀이 2.81 mg%로 가장 높은 함량을 보였고, 다음으로 알찬밀, 올그루밀 순이었다. 지방산 조성은 보리와 밀에서 Cl8:2>Cl6:0>Cl8:1 순으로 보리는 전체의 90%, 밀은 92%를 차지하였다. 단일 불포화지방산은 보리가 11∼13%, 밀이 21∼27%이며, 다중불포화지방산은 보리가 57∼59%, 밀은 36∼50%로 보리가 더 많은 것으로 나타났다. PUFA/SFA 비율은 보리의 경우 2.1로 품종별로 지방산 조성에 차이를 나타내지 않은 반면 밀은 1.0∼1.9 범위로 품종별로 지방산 조성에 차이를 나타내었다. 보리와 밀의 아미노산 함량은 glutamic acid를 가장 많이 함유하는 것으로 분석되었다. 보리 품종별 필수아미노산 함량을 살펴보면 Lysine, valine, tryptophan 함량은 두산8호에서, phenylalanine 함량은 서둔찰보리에 많이 함유되어 있는 것으로 분석되었다. 밀 품종별 Iysine, isoleucine 함량은 탑동밀에서 다소 낮았다.) 보였다. 체질량지수와 비만지수는 각각 HDL-콜레스테롤과는 부의 (각 P<0.05), 적혈구수와는 정의(각 p<0.05) 상관관계를 보였다. 허리엉덩이둘레비는 혈청 GPT, glucose, MCV와 각각 유의한 정의 상관관계를 보였다(각 p<0.05). 이상의 연구결과를 종합할 때 남녀 비만 중학생 모두 총 열량 섭취량 중 지질로 인한 열량 섭취비율이 높았고 비만도가 증가할수록 콜레스테롤의

미소진동 자료를 이용한 EGS 사이트에서의 효율적인 모니터링 알고리듬 개발 (Development of Efficient Monitoring Algorithm at EGS Site by Using Microseismic Data)

  • 이상민;변중무
    • 지구물리와물리탐사
    • /
    • 제19권3호
    • /
    • pp.111-120
    • /
    • 2016
  • 지열발전을 위해 심부에 인공적으로 균열대를 생성시키는 EGS (Enhanced/Engineered Geothermal System) 지열발전 기술에서는 유체의 이동통로가 되는 균열의 연결성 향상이 매우 중요하며, 다단계에 걸쳐 이루어지는 수압파쇄시 발생되는 균열의 정보는 미소진동 모니터링을 통해 확인이 가능하다. 하지만 각 단계별 수압파쇄시 발생되는 균열에 의해 변화된 속도구조를 고려하지 않고 미소진동 모니터링을 수행하게 되면, 다음 단계의 수압파쇄시 발생된 균열의 위치정보는 실제 위치와는 차이를 보이게 된다. 이 연구에서는 Kim et al. (2015)에 의해 개발된 미소진동 위치역산 알고리듬을 심부 수 km 하부를 대상으로 하는 EGS 지열발전에 적합하도록 개선시켰으며, 각 단계별 수압파쇄시 발생되는 균열에 의해 변화된 속도구조를 측정된 미소진동 자료를 이용하여 영상화할 수 있는 3차원 속도역산 알고리듬을 개발하였다. 아이코날 방정식(Eikonal equation)을 사용하여 단순 층서구조뿐만 아니라 복잡한 속도구조의 경우에도 적용가능하도록 하였고 그림자 영역(shadow zone)에 대해서도 어느 위치에서나 정확한 주시계산이 이루어지도록 하였으며, 프레넬 볼륨(Fresnel volume)을 이용한 자코비안(Jacobian) 계산을 통하여 속도역산의 계산시간을 효과적으로 단축시켰다. 또한, EGS 사이트를 모사한 속도모델에서 얻어진 미소진동 자료를 개발된 알고리듬에 적용시킨 결과, 전 단계에 이루어진 수압파쇄에 의해 변화된 속도를 반영하는 향상된 속도모델을 얻을 수 있었고 이를 이용하여 위치 재결정을 수행한 결과 실제 위치와 거의 일치하는 결과를 얻었다.

파쇄대 응회암 대수층의 지하수 유동 특성화 기법 (Analysis of Groundwater Flow Characterization in Fractured Aquifer System)

  • 김용제;김태희;김구영;황세호;채병곤
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권4호
    • /
    • pp.33-44
    • /
    • 2005
  • 국내 수리지질환경에 적합한 다양한 방법론적 접근을 통해 균열암반에서의 지하수 유동 특성을 해석하기 위하여 금산군 남이면 남이자연휴양림 내 연구지역에서 시험시추공 5개(BH-1, -2, -3, -4, -5)를 대상으로 연구를 수행하였다. 연구지역의 균열발달 특성을 파악하기 위한 기초조사로서 광역 선구조선 분포를 분석한 결과 북서-남동 방향의 연장 성이 좋은 구조선들이 우세하게 분포하는데, 이 영향으로 남북방향으로 배열된 시추공들 사이에 파쇄대의 발달과 연 결성이 좋다. 현장 지질조사, 시추코아 로깅, 물리검층, 전기비저항 토모그래피, 열추적자시험, 유향 유속검층을 통해 각 시추공에 대한 파쇄대 특성 및 시추공 간의 투수성과 상호 연결성을 해석하였다. 시추공 간의 파쇄대 연결성음 분석한 결과 주입정인 BH-1 호공과 BH-2, BH-3은 연결성이 매우 나쁜 반면에 BH-1, BH-4, BH-5 호공은 연결성 이 매우 좋다. 특히, BH-1 호공과 BH-5 호공의 수리적 연결성을 파악하기 위하여 BH-1에서 양수하고 BH-5에서 측정한 경우 심도 12 m 지점에서 강한 지하수의 유출이 있으며 이 외의 지점에서는 부분적인 지하수의 유출업이 있다. 주된 지하수 유입은 심도 65 m와 70 m 지점에서 발생하는 것으로 나타났다. 반면에 BH-5에서 양수하고 BH-1에서 측정한 경우에는 심도 17 m 지점에서 시추공으로부터 강하게 지하수의 유출이 발생하고 있음이 확인되었고, 이외에 70 m 지점에서도 유출이 일어나고 있다. 또한 투수성을 가지는 균열대 중 공간 상호 연결성을 가지는 것으로 확인된 것은 BH-1의 경우 15 m, 67 m, 71 m 지점이며, BH-5는 15 m, 17 m, 22 m, 72 m, 83 m 심도의 균열 혹은 균열대에서 BH-1과 상호 연결성이 있다.

시추공 전기비저항 토모그래피를 이용한 비저항 영상화: 과잉취수에 의한 석회암 지반침하 지역 사례 (Resistivity Imaging Using Borehole Electrical Resistivity Tomography: A Case of Land Subsidence in Karst Area Due to the Excessive Groundwater Withdrawal)

  • 송성호;이규상;엄재연;서정진
    • 한국지구과학회지
    • /
    • 제32권6호
    • /
    • pp.537-547
    • /
    • 2011
  • 석회암 공동이 발달한 도심지역에서 지하수위 하강에 수반되어 발생한 함몰형 지반침하의 원인 규명 및 공동의 분포 특성 파악을 위하여 시추공을 이용한 전기비저항 토모그래피탐사를 실시하였다. 이때 지하수 수리지질 특성을 파악하기 위하여 시추코아의 비저항 측정, 지하수위 측정 및 수리전도도 해석을 병행하였다. 연구 지역에서의 완만한 지하수위 분포 특성과 0.8-$9.3{\times}10^{-4}\;cm/s$ 범위의 수리전도도 분포로 부터 연구지역의 수리지질 특성은 불균질성이 크지 않은 것으로 나타났다. 시추코아를 이용한 전기비저항 측정 결과 연구지역의 석회암은 파쇄가 많은 경우, 변질이 심한 경우 및 신선한 경우로 나눠지며, 전기비저항은 각각 103-161, 218-277 및 597-662 ohm-m의 범위로 나타났다. 시추결과 점토로 충전된 석회암 공동 지점은 토모그래피 탐사자료의 역산 결과 50 ohm-m 이하의 낮은 비저항으로 나타났으며, 각 시추공 간 비저항 영상 단면으로부터 연구지역 전체적으로 지표 하부 심도 약 10-20 m 구간까지 파쇄대 또는 석회암 공동 구간이 분포하는 것으로 나타났다. 또한 석회암 공동의 직경은 약 4-6 m 규모로, 대부분 점토질로 충전된 것으로 판단된다.

표준습지 분석을 통한 대체습지의 생태 성능 기준 개발 (Developing the Ecological Performance Standard for Replaced Wetlands by Analyzing Reference Wetlands)

  • 구본학;정진용;박미옥
    • 한국환경복원기술학회지
    • /
    • 제14권1호
    • /
    • pp.11-22
    • /
    • 2011
  • This study was established to build and suggest the Ecological Performance Standards for replaced wetlands as the mitigation strategies for the construction projects. The request performance and assessment factors and standards were derived by bibliographic review and verified by the field survey for the reference wetlands. And the weights for each factor were derived by AHP(Analytical Hierarchy Process) method. The results are as follows : 1) Assessment factors were induced by in-depth research of many wetland assessment models and benchmarks evaluated ecological functions. This study proposed final 12 assessment factors through ecological specialist and experts interviews added with literature analysis. 2) 10 natural wetlands were selected as Reference Wetlands as the measure to propose assessment factors and assessment criteria. Those reference wetlands are well-conserved inland natural wetlands classified to the one having worthy to conserve (grade "high") according to RAM(Rapid Assessment Method). Reference wetlands chosen by the study are Parksilji, Jeongyangji, Mulkubi, Bawineupkubi, Jilnalneup, Jinchonneup, Doomoso, Haepyung wetland, Whangjeong wetland, and Whapo wetland. The research developed assessment criteria for the performance assessment factors based on several explorations of the reference wetlands. 3) "Requiring performance" of replaced wetlands is defined as "to carry out similar or same ecological functions provided by natural wetlands", in overall. The detailed requiring performances are as follows; ${\bullet}$ to play a role of wildlife habitats ${\bullet}$ to have biological diversity ${\bullet}$ to connect with other ecosystems ${\bullet}$ to provide water environment to perform good ecological functions 4) The assessment factors for required performance are categorized by wildlife habitat function, biological diversity, connectivity of adjacent ecosystem, and water environment. Wildlife habitat category is consisted of wildlife habitat creation, size of replacement wetland, and site suitability. Biological diversity category contains the number of plant species, the number of wildlife species, and number of protected species as the sub-factors. Connectivity of adjacent ecosystem is comprised of wildlife corridor, green network and distance from other ecosystem. Finally, water environment make up with water quality, depth of water body, and shape of waterfront. 5) Finally, every assessment factors were verified and weighted by the AHP methods and the final standards were proposed. The weights of factors of requiring performance suggested as habitat (0.280), connectivity (0.261), diversity (0.260), hydraulic environment (0.199). And those of detailed sub-factors are site suitability (0.118), protected species (0.096), distance to neighbor ecosystem (0.093), habitat creating (0.091), green corridor (0.090) etc.