• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.26-26
• /
• 2003

Lithium storage electrodes for rechargeable batteries require mixed electronic-ionic conduction at the particle scale in order to deliver desired energy density and power density characteristics at the device level. Recently, lithium transition metal phosphates of olivine and Nasicon structure type have become of great interest as storage cathodes for rechargeable lithium batteries due to their high energy density, low raw materials cost, environmental friendliness, and safety. However, the transport properties of this family of compounds, and especially the electronic conductivity, have not generally been adequate for practical applications. Recent work in the model olivine LiFePO$_4$, showed that control of cation stoichiometry and aliovalent doping results in electronic conductivity exceeding 10$^{-2}$ S/cm, in contrast to ~10$^{-9}$ S/cm for high purity undoped LiFePO$_4$. The increase in conductivity combined with particle size refinement upon doping allows current rates of >6 A/g to be utilized while retaining a majority of the ion storage capacity. These properties are of much practical interest for high power applications such as hybrid electric vehicles. The defect mechanism controlling electronic conductivity, and understanding of the microscopic mechanism of lithiation and delithiation obtained from combined electrochemical and microanalytical techniques, will be discussed

• Carbon letters
• /
• 제5권4호
• /
• pp.159-163
• /
• 2004

The polymer-ceramic hybrid, known as 'ceramer', was synthesized by a sol-gel process by incorporating different amount of alkoxide as source of silicon in resorcinol-formaldehyde in presence of basic catalyst to get different percentage of silicon in ultimate carbonized composites. FTIR of the ceramer confirms that it is a network of Si-O-Si, Si-O-$CH_2$ and Si-OH type groups linked with benzene ring. Different amount of silicon in the ceramer exhibits varying temperature of thermal stability and lower coefficient of thermal expansion as compared to pure resorcinol-formaldehyde resin. The lower value of CTE in ceramer is due to existence of silica and resorcinol -formaldehyde in co-continuous phase. Unidirectional composites prepared with ceramer matrix and high-strength carbon fibers show lower value of flexural strength at polymer stage as compared to those prepared with resorcinol-formaldehyde resin. However, after heat treatment to $1450^{\circ}C$, the ceramer matrix composites show large improvement in the mechanical properties, i.e. with 7% silicon in the ceramer, the flexural strength is enhanced by 100% and flexural modulus value by 40% as compared to that of pure resorcinol-formaldehyde resin matrix composites.

• Advances in materials Research
• /
• 제9권1호
• /
• pp.1-14
• /
• 2020

The hybrid method of three-dimensional ion implantation and electric arc is presented as a novel plasma-ion technique that allows by means of high voltage pulsed and electric arc discharges, the bombardment of non-metallic and metallic ions then implanting upon the surface of a solid surface, especially out of metallic nature. In this study AISI/SAE 4140 samples, a tool type steel broadly used in the industry due to its acceptable physicochemical properties, were metallographically prepared then surface modified by implanting titanium and simultaneously titanium and nitrogen particles during 5 min and 10 min. The effect of the ion implantation technique over the substrate surface was analysed by characterization and electrochemical techniques. From the results, the formation of Ti micro-droplets upon the surface after the implantation treatment were observed by micrographs obtained by scanning electron microscopy. The presence of doping particles on the implanted substrates were detected by elemental analysis. The linear polarization resistance, potentiodynamic polarization and total porosity analysis demonstrated that the samples whose implantation treatment with Ti ions for 10 min, offer a better protection against the corrosion compared with non-implanted substrates and implanted at the different conditions in this study.

• 한국육종학회지
• /
• 제41권1호
• /
• pp.1-8
• /
• 2009

This study was carried out to breed and develop high quality and functional nutrient tomato with multi disease resistance as well as a stable growing adaptation for fresh market usage under protected plastic houses cultivation. The materials were used 5 inbred lines and their 6 hybrids of large tomato group, which have been bred and developed from 1999 to 2007 in Division of Plant Resource Department of Chungnam National University. Fruit weight showed hybrid vigor effect that $F_1$ hybrids weighed more than their parent lines, fruit shape formed three type of oblate, deep oblate and globe shape, in firmness and pericarp thickness have got a high significant correlation, inbred DN611 line was measured the most firm fruit with 6.04 mm pericarp thickness. In fruit color at maturity, pink color crossed to red color appeared all red fruit color in the $F_1$ hybrids, it means red skin color is a dominant gene compared to pink skin color is a recessive gene in tomato, while between fruit skin color and shoulder part color showed no any co-relationship. The sugar content and titratable acid of $F_1$ hybrids inherited an intermediate data of their parent lines, the flavor of KP543 inbred line and the hybrid (JB535 x KP543) revealed the better taste with high brix and proper titratable acid content$^{*}$. In beta carotene content DN611 line showed 2~3 times higher than other materials so that its 3 hybrids contained an increased level of beta carotene, lycopene content was not so much difference among inbred lines and $F_1$ hybrids, of them MD508 contained higher of 8.72 mg and hybrid (JB535 x JA517) had 8.05 mg lycopene content per 100 g fruit, overall pink skin color and red skin color measured a higher lycopene content than yellow and orange skin color at ripe stage. In disease resistance test by PCR marker for Fusarium race2 (I2), Nematode (Mi1), ToMV ($Tm2^2$), Cladosporium (Cf9), (JB535 x JA517) hybrid have got multi-resistance with homozygote band in Nematode, ToMV, Cladosporium and heterozygote band in Fusarium race2. Through this breeding program we could select high quality and functional nutrient with multi resistant $F_1$ hybrids and inbred lines in tomato which are two best hybrids (JB535 x MD508), (JB535 x JA517), additionally developed high beta carotene inbred line DN611 and increased the level of lycopene inbred line MD508. These results will be very useful to make a high quality tomato variety continuously.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1569-1575
• /
• 2012

본 논문은 AUTODYN-3D 프로그램을 이용한 방탄 헬멧의 탄도충격에 관한 연구를 하였다. 두 가지 유형의 재료가 방탄 헬멧에 사용되었다. Kevlar 및 Steel/Kevlar 혼합복합재 이다. 강구와 7.62 mm 금속피복탄이 시뮬레이션에서 사용되었다. 시뮬레이션에서 발사체의 변형된 형상과 내부에너지가 계산되었다. 결과는 Steel/Kevlar 헬멧을 관통하기 위해 요구되는 충격속도는 강구와 7.62 mm 금속피복탄에 따라 각각 655 m/s 와 845 m/s 이상이다. 결과로부터 Kevlar 와 Steel/Kevlar 헬멧 사이의 탄도 저항에 큰 차이를 볼 수 있었다. NIJ-STD-0106.01 Type II헬멧에 대한 시뮬레이션으로 충격 속도 358 m/s 의 7.62 mm 금속피복탄이 사용되었다. 시뮬레이션 결과는 Steel/Kevlar 헬멧이 충격 속도 358 m/s 의 7.62 mm 금속피복탄을 방어할 수 있는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.13-16
• /
• 2008

철근으로 휨 보강된 일반적인 부재의 경우, 강도설계법으로 부재의 공칭 휨 강도를 계산할 때 모든 휨 인장 철근은 극한상태에서 항복한다고 가정한다. 따라서 인장력은 철근의 도심에 작용하고 인장 철근 단면적과 철근의 항복강도의 곱으로 표현될 수 있다. 그러나 FRP bar는 철근과 달리 항복거동을 보이지 않기 때문에 각 열 FRP bar에 작용하는 응력은 중립축에서 떨어진 거리에 따라 달라질 것이다. 게다가 서로 다른 종류의 FRP bar가 동시에 한 부재에 적용된다면, 각 FRP bar의 변형률에 따라 작용하는 응력 또한 다양하게 될 것이고, 거동 양상 역시 예상과 다르게 나타날 것이다. 이에 본 연구에서는 일반철근, CFRP bar, GFRP bar를 이용하여 하이브리드 휨 보강된 6개의 고강도 콘크리트 보를 제작하고 구조실험을 실시하였다. 실험 결과 하이브리드 보강된 부재는 FRP bar로 단순 보강된 부재의 낮은 강성, 큰 균열폭, 취성 문제를 상당히 보완시켜주는 것으로 나타났다.

• Journal of Welding and Joining
• /
• 제32권4호
• /
• pp.10-14
• /
• 2014

Laser aided Direct Metal Tooling(DMT) process is a kind of Additive Manufacturing processes (or 3D-Printing processes), which is developed for using various commercial steel powders such as P20, P21, SUS420, H13, D2 and other non-ferrous metal powders, aluminum alloys, titanium alloys, copper alloys and so on. The DMT process is a versatile process which can be applied to various fields like the mold industry, the medical industry, and the defense industry. Among of them, the application of DMT process to the mold industry is one of the most attractive and practical applications since the conformal cooling channel core of injection molds can be fabricated at the slightly expensive cost by using the hybrid fabrication method of DMT technology compared to the part fabricated with the machining technology. The main objectives of this study are to provide various characteristics of the parts made by DMT process compared to the same parts machined from bulk materials and prove the performance of the injection mold equipped with the conformal cooling channel core which is fabricated by the hybrid method of DMT process.

• Composites Research
• /
• 제26권4호
• /
• pp.245-253
• /
• 2013

본 연구에서는 입자형태인 두 가지 이상의 강화제가 기지 내에 무작위로 분포하여 하이브리드 복합재료를 이룰 때, 강화제의 함유량에 따른 복합재료의 인장강도 및 탄성계수를 예측할 수 있는 이론 모델을 제안하였다. 이를 위하여 연속적인 두 강화제가 기지 내에 평행하게 분포한 복합재료 모델에 입자형태의 한 가지 강화제가 무작위하게 분포한 복합재료 모델을 수정 적용하였다. 본 연구에서 제안한 모델의 정확성과 타당성을 논의하기 위해, 산업체에서 널리 쓰이고 있는 폴리프로필렌을 기지로 하고, 탈크와 유리단섬유를 서로 다른 강화제로 한 복합재료를 제작하여 인장강도 및 탄성계수를 측정하였다. 인장강도 값을 예측하는 경우, 이전의 이론 모델이 실험 측정값과 7배 이상의 오차를 보이는 반면 본 연구의 모델은 비슷한 값을 예측하였다. 탄성계수의 경우에도 본 연구의 모델은 비교적 정확하게 실험 측정 값을 예측할 수 있었다.

• 소성∙가공
• /
• 제20권4호
• /
• pp.316-323
• /
• 2011

The hot curvature-forming of large aluminum thick plate using a grid-typed hybrid die is a process for the production of a spherical LNG tank. Many variables such as the initial die surface quality, grid size, grid thickness, size of blank plate and cooling line design, control the success of the process. In addition, the plate used in this process is generally larger than $10{\times}10m$ in size. Thus, it is very difficult to predict the surface characteristics of the plate during forming and to measure the different parameters due to the high cost of the experiments. In order to optimize the process design for the grid-type die, the development of an analytical method to predict the surface characteristics of the final product in hot curvature-forming is needed. This paper described the development of the method and procedures for FE simulations of the hot curvature-forming process, including hot forming, air flow, cooling, and thermal deformation analyses. An experiment for a small scale model of the process was conducted to check the validity of the numerical method. The results showed that the curvature of the plate in the analysis agrees well with that of the experiment within 0.037 and 0.016% tolerance margins for its side and corner, respectively.

• Composites Research
• /
• 제19권1호
• /
• pp.29-35
• /
• 2006

첨단 전자무기체계의 지속적인 발전으로 인하여 현대전의 승패는 적 레이더 탐지의 회피에 크게 좌우된다고 할 수 있다. 반사되는 레이더의 탐지신호를 최소화시키기 위한 다양한 연구가 수행되어 왔는데, 본 연구에서는 뛰어난 기계적, 전자기적 물성으로 응용분야가 지속적으로 확대되고 있는 섬유강화 복합재료를 이용하여 레이더 전자파 흡수체(Radar absorbing structure, RAS)를 제작하고 레이더 단면적(Radar cross section, RCS)을 평가하였다 유리섬유 복합재에 뛰어난 유전적 특성을 지닌 나노 크기의 카본블랙(Carbon-black)을 첨가하여 흡수층을 구성하고, 반사특성이 탁월한 탄소섬유 복합재를 후면의 반사층으로 배치하여 "C" 및 "U" 형상의 하이브리드 복합재 RAS 겔을 제작하였다. RAS 쉘의 제작간 서로 다른 두 재료의 열적물성치 차이로 스프링 백이라 불리는 변형이 발생하였는데, 금형의 굽힘각도 제어를 통하여 효과적으로 보정할 수 있었다. 또한 상용 유한요소해석 프로그램인 ANSYS를 이용하여 스프링 백 보정 결과를 예측하고 실험결과와 비교하였다. 제작된 RAS쉘의 RCS는 근사적 계산기법인 물리광학법을 이용하여 예측하고 컴팩트 레인지(Compact range)를 이용하여 측정한 실힘결과와 비교하였다 두가지 형상의 RCS 모두 측정결과와 예측된 RCS 값이 일치하며 우수한 레이더 전자파 흡수 특성을 지닌 것을 확인하였다.