• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1635-1642
• /
• 2012

The identification of the dynamic properties of structural joints is important for predicting the dynamic behavior of assembled systems. However, the identification of the properties using analytical or experimental approaches is extremely difficult or even impossible. Several studies have proposed hybrid or synthesis methods that simultaneously used analytical and experimental approaches to identify the dynamic properties of a joint. However, among the many types of joints, only the bolt joint was treated as a practical example in these studies. In this study, for a simple assembly system comprising two plates and one hinge joint, a simple methodology involving the use of the static-based subpart analysis method to identify the dynamic properties is proposed. Finally, the proposed method is applied to a glove box in a passenger vehicle that includes hinge joints.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.177-182
• /
• 2020

In this study, the effect of nanofibers in cement pastes on the compressive and tensile strength of hardened cement pastes was studied. Two types of nanofibers, nylon 66 nanofibers and carbon nanotube-nylon 66 hybrid nanofibers, were manufactured by electrospinning methodology and mixed in cement powder respectively. The specimens for experiments were prepared by water to cement ratio of 0.5 and cured in water for 28 days. The effect of nanofibers on the increase of the compressive and tensile strength were confirmed by the experimental results. The well-linking effect of nanofibers in the microstructure of the hardened cement pastes has been found by scanning electron microscope (SEM) analysis and well-explained for the increase in mechanical strength. Besides, field emission transmission electron microscope (FE-TEM) analysis and thermal gravimetric analysis (TGA) have also been conducted to analyze the properties of nanofibers as well as the microstructure of the hardened modified cement pastes.

• Journal of the Korea Society for Simulation
• /
• v.23 no.2
• /
• pp.1-6
• /
• 2014

CPS (cyber-physical systems) which consists of connected and diverse embedded systems and physical systems are a new paradigm. Traditional systems were usually considered to be passive and dumb parts in physical systems, but with CPS, we have to take into account what are being moved or changed in the physical systems. So, as increasing the complexity of CPS, potential errors in the systems also increase. In this paper, for enhancing the reliability of CPS, we exploit an executable-model-based design methodology and propose a distributed simulation method to verify the design of CPS. For the design of the systems including discrete and continuous factors, we apply DEV&DESS formalism and simulate models in distributed simulation environments through DDS middleware. We also illustrate the applications of CPS with our modeling tool.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.183-188
• /
• 2011

The electronic structure and properties of Ni$(C_6H_{4-n}F_n)(CO)_2$ ($C_6H_4$=benzyne, n=1-4) complexes have been investigated using hybrid density functional B3LYP theory. Both aromatic natures and nucleus independent chemical shift (NICS) of the benzyne rings have been analyzed. Among mono-, di-, and tri-fluorinated complexes, 3-F, 3,6-F, and 4-H are the most stable isomers, respectively. NICS values calculated at the several points above the ring centers are consistent with those based on the relative energies of the complexes. The atoms in molecules (AIM) analysis indicates that Ni-C bond distance is well correlated with the electron density of a ring critical point (${\rho}_{rcp}$) in all species.

• Ocean Systems Engineering
• /
• v.7 no.2
• /
• pp.143-155
• /
• 2017

For complex flexible structures such as nets, the determination of drag forces and its deformation is a challenging task. The accurate prediction of loads on cages is one of the key steps in designing fish farm facilities. The basic physics with a simple cage, can be addressed by the use of experimental studies. However, to design more complex cage system for various environmental conditions, a reliable numerical simulation tool is essential. In this work, the current load on a cage is calculated using a Morison-force model applied at instantaneous positions of equivalent-net modeling. Variations of solidity ratio ($S_n$) of the net and current speed are considered. An equivalent array of cylinders is built to represent the physical netting. Based on the systematic comparisons between the published experimental data for Raschel nets and the current numerical simulations, carried out using the commercial software OrcaFlex, a new formulation for $C_d$ values, used in the equivalent-net model, is presented. The similar approach can also be applied to other netting materials following the same procedure. In case of high solidity ratio and current speed, the hybrid model defines $C_d$ as a function of Re (Reynolds number) and $S_n$ to better represent the corresponding weak diffraction effects. Otherwise, the conventional $C_d$ values depending only on Re can be used with including shielding effects for downstream elements. This new methodology significantly improves the agreement between numerical and experimental data.

• Review of Culture and Economy
• /
• v.21 no.3
• /
• pp.89-124
• /
• 2018

Although design industry belongs to one of the creative industries and contributes significantly to urban cultural economy based on its cluster formation, researches on design industry are rarely made explicit from the perspective of creative industry cluster. After reviewing the life cycle of design industry clusters in Euljiro and Hongdae Area in Seoul, this study compares these two clusters with respect of diverse dimensions of creative industry cluster such as agglomeration economy, spin-off activities and institutional environments. Research methodology includes the analysis of ?Seoul Business Statistics? and the in-depth interviews with 14 professional designers. The result shows that design industry cluster in Euljiro is close to the traditional industry cluster mainly dependent on printing industry with very limited impact on urban economy, while Hongdae Area develops creative industry cluster by virtue of university spin-offs, art markets, hybrid cultural consumption spaces and the active participation of designers contributing to urban economy in diverse ways. This comparative analysis highlights the importance of various environmental components to encourage creative activities in developing the creative industry cluster.

• Korean Journal of Agricultural Science
• /
• v.46 no.1
• /
• pp.183-194
• /
• 2019

Adulteration of argan oil with some other cheaper oils with similar chemical compositions has resulted in increasing demands for authenticity assurance and quality control. Fast and simple analytical techniques are thus needed for authenticity analysis of high-priced argan oil. Raman spectroscopy is a potent technique and has been extensively used for quality control and safety determination for food products In this study, Raman spectroscopy in combination with a net analyte signal (NAS)-based methodology, i.e., hybrid linear analysis method developed by Goicoechea and Olivieri in 1999 (HLA/GO), was used to predict the different concentrations of olive oil (0 - 20%) added to argan oil. Raman spectra of 90 samples were collected in a spectral range of $400-400cm^{-1}$, and calibration and validation sets were designed to evaluate the performance of the multivariate method. The results revealed a high coefficient of determination ($R^2$) value of 0.98 and a low root-mean-square error (RMSE) value of 0.41% for the calibration set, and an $R^2$ of 0.97 and RMSE of 0.36% for the validation set. Additionally, the figures of merit such as sensitivity, selectivity, limit of detection, and limit of quantification were used for further validation. The high $R^2$ and low RMSE values validate the detection ability and accuracy of the developed method and demonstrate its potential for quantitative determination of oil adulteration.

• Nuclear Engineering and Technology
• /
• v.51 no.4
• /
• pp.1098-1108
• /
• 2019

Korea's first commercial nuclear power plant at Kori site was permanently shut down in 2017 and is currently in transition stage. Preparatory activities for decommissioning such as historical site assessment, characterization, and dismantling design are being actively carried out for successful D&D (Dismantling and Decontamination) at Kori site. The ultimate goal of decommissioning will be to ensure the safety of workers and residents that may arise during the decommissioning of nuclear facilities and, thereby finally returning the site to its original status in accordance with the release criteria. Upon completion of decommissioning, the resident's safety at a site released will be assessed from the evaluation of dose caused by radionuclides expected to be present or detected at the site. Although the U.S. commercial nuclear power plants with decommissioning experience use different site release criteria, most of them are 0.25 mSv/y. In Korea, both the unrestricted and restricted release criteria have been set to 0.1 mSv/y by the Nuclear Safety and Security Commission. However, since the dose is difficult to measure, measurable concentration guideline levels for residual radionuclides that result in dose equivalent to the site release criteria should be derived. For this derivation, site reuse scenario, selection of potential radionuclides, and systematic methodology should be developed in planning stage of Kori site decommissioning. In this paper, for calculation of a preliminary site-specific Derived Concentration Guideline Levels (DCGLs) for the Nuclear Power Plant site, a novel approach has been developed which can fully reflect practical reuse plans of the Kori site by taking into account multiple site reuse scenarios sequentially, thereby striking a remarkable distinction with conventional approaches which considers only a single site scenario.

• Fourth Industrial Review
• /
• v.1 no.1
• /
• pp.1-10
• /
• 2021

Purpose - This case study analyzes the internationalization strategy and innovation strategy as key factors contributing to the business success of CAP, a small and medium-sized manufacturing company in Korea producing auto parts such as wipers. This study describes the diversification strategies conducted by CAP Corporation and highlights the company's core competencies that have largely contributed to their global competitive success. Research design, data, and methodology - This paper provides in-depth case study on how CAP was able to grow into a hidden champion company, focusing on their strategies since its establishment. In particular, by analyzing the success factors centering on CAP's aggressive innovation strategy and internationalization strategy, it presents guidelines for small and medium-sized enterprises in Asian countries to become a Hidden Champion company. Result - CAP's product technology has successfully established innovative system on their product called 'vertebra spring' to distribute uniform pressure to the rubber to ensure performance as well as durability of their products. In order to continue benefiting from utilizing core competence and to continue pursuing technological advancement in the wiper industry, CAP has launched a wide range of products (flat blade, conventional blade, hybrid blade) applicable to 95% of the vehicle in the market. Conclusion - Taken together, CAP has many aspects of a hidden champion company by investing in R&D up to 8% of its annual sales to R&D investment even during the crises situation. This number is about 3.36 times higher than the average ratio of listed companies in Korea. Furthermore, the leadership of the management team as well as their vision toward the global market and strong commitment to innovation enabled CAP to become the world's fifth-largest wiper and Asia's No. 1 wiper manufacturer.

• Structural Engineering and Mechanics
• /
• v.78 no.5
• /
• pp.599-610
• /
• 2021

Early detection of small concrete crack or reinforcement corrosion is necessary for Structural Health Monitoring (SHM). Global vibration based methods are advantageous over local methods because of simple equipment installation and cost efficiency. Among vibration based techniques, FRF based methods are preferred over modal based methods. In this study, a new coupled method using frequency response function (FRF) and proper orthogonal modes (POM) is proposed by using the dynamic characteristic of a damaged beam. For the numerical simulation, wave finite element (WFE), coupled with traditional finite element (FE) method is used for effectively incorporating the damage related information and faster computation. As reported in literature, hybrid combination of wave function based wave finite element method and shape function based finite element method can addresses the mid frequency modelling difficulty as it utilises the advantages of both the methods. It also reduces the dynamic matrix dimension. The algorithms are implemented on a three-dimensional reinforced concrete beam. Damage is modelled and studied for two scenarios, i.e., crack in concrete and rebar corrosion. Single and multiple damage locations with different damage length are also considered. The proposed methodology is found to be very sensitive to both single- and multiple- damage while being computationally efficient at the same time. It is observed that the detection of damage due to corrosion is more challenging than that of concrete crack. The similarity index obtained from the damage parameters shows that it can be a very effective indicator for appropriately indicating initiation of damage in concrete structure in the form of spread corrosion or invisible crack.