• 제목/요약/키워드: hybrid membranes

검색결과 104건 처리시간 0.029초

막여과 정수처리공정에서 전여과공정의 효용성 평가 (Utility Estimation of Pre-filtration on the Membrane Water Treatment Process)

  • 박민구;최상일
    • 상하수도학회지
    • /
    • 제22권4호
    • /
    • pp.445-448
    • /
    • 2008
  • The application of the membrane filtration process has been increased for the drinking water treatment system because of excellent quality of treated water compared with the sand filtration process. The selection of suitable pre-treatment processes and optimum flux according to the characteristics of raw water are important factors for the design of membrane processes. In this study, the most efficient pre-treatment processes for drinking water was selected by investigating the effects of pre-treatment processes on the operational stability of the membrane filtration process. Both lab-scale and pilot-scale experiments were conducted. In the lab-scale test, the effect of pre-treatment processes on the stability of the membrane filtration process was investigated indirectly by comparing the performance of membrane flux for raw water, pre-treated water, and membrane permeated water. In the pilot-scale test, the usefulness of prefiltration processes was assessed by comparing the performance of single membrane process and hybrid coagulation-membrane process. The results indicated that the coagulation process contributed to the stabilization of trans-membrane pressure (TMP) by removing contaminants on membranes, though the pre-filtration process had little effect on the TMP.

Development of the ultra/nano filtration system for textile industry wastewater treatment

  • Rashidi, Hamidreza;Sulaiman, Nik Meriam Nik;Hashim, Nur Awanis;Bradford, Lori;Asgharnejad, Hashem;Larijani, Maryam Madani
    • Membrane and Water Treatment
    • /
    • 제11권5호
    • /
    • pp.333-344
    • /
    • 2020
  • Advances in industrial development and waste management over several decades have reduced many of the impacts that previously affected ecosystems, however, there are still processes which discharge hazardous materials into environments. Among industries that produce industrial wastewaters, textile manufacturing processes play a noticeable role. This study was conducted to test a novel continuous combined commercial membrane treatment using polyvinylidene fluoride (PVDF), ultrafiltration (UF), and polyamide (PA) nanofiltration (NF) membranes for textile wastewater treatment. The synthetic textile wastewater used in this study contained sodium silicate, wax, and five various reactive dyes. The results indicate that the removal efficiency for physical particles (wax and resin) was 95% through the UF membrane under optimum conditions. Applying UF and NF hybrid treatment resulted in total effective removal of dye from all synthetic samples. The efficiency of sodium silicate removal was measured to be between 2.5 to 4.5% and 13 to 16% for UF and NF, respectively. The chemical oxygen demand in all samples was reduced by more than 85% after treatment by NF.

Application of Hybrid Polymeric Complexes to Solid State and Materials Chemistry

  • Josik Portier;Guy Campet;Nadine Treuil;Armel Poquet;Kim, Young Il;Kwon, Soon Jae;Kwak, Seo Young;Choy, Jin Ho
    • 대한화학회지
    • /
    • 제42권4호
    • /
    • pp.487-500
    • /
    • 1998
  • A bird's-eye view on preparation, structure and properties of polymeric complexes in the field of Inorganic-Organic-Hybrids is presented in the view point of solid state and materials chemistry. These materials are useful precursors for preparing nanoparticles and fine grain oxides. Some of them are electroactive and are used as protonic or lithium electrolytes, electrochromic materials or membranes for sensors and actuators. New results on bio-hybrids, a class of material not far from polymeric complexes, are also described.

  • PDF

Flexible membranes with a hierarchical nanofiber/microsphere structure for oil adsorption and oil/water separation

  • Gao, Jiefeng;Li, Bei;Wang, Ling;Huang, Xuewu;Xue, Huaiguo
    • Journal of Industrial and Engineering Chemistry
    • /
    • 제68권
    • /
    • pp.416-424
    • /
    • 2018
  • Oil spill and oily wastewater have now become a serious threat to the freshwater and marine environments. Porous materials with super-hydrophobicity and super-oleophilicity are good candidates for the oil adsorption and oil/water separation. Here, flexible hybrid nanofibrous membrane (FHNM) containing $SiO_2$/polyvinylidene fluoride (PVDF) microspheres was prepared by simultaneous electrospinning and electrospraying. The obtained FHNM combined the flexibility of the nanofiber mat and super-hydrophobicity of the microspheres, which could not be achieved by either only electrospinning or only electrospraying. It was found that when the weight ratio between the $SiO_2$ and PVDF reached a critical value, the $SiO_2$ nanoparticles were present on the PVDF microsphere surface, significantly improving the surface roughness and hence the contact angle of the FHNM. Compared with the pure electrospun PVDF nanofiber mat, most of the FHNMs have a higher oil adsorption capacity. The FHNM could separate the oil with water quickly under the gravity and displayed a high efficiency and good reusability for the oil/water separation. More importantly, the FHNM could not only separate the oil with the pure water but also the corrosive solution including the salt, acid and alkali solution.

부탄올 분리용 투과증발 복합막 제조 (Preparation of Pervaporation Composite Membranes for Butanol Separation)

  • 김성수;김현영
    • 멤브레인
    • /
    • 제19권1호
    • /
    • pp.54-62
    • /
    • 2009
  • 부탄올을 투과증발 공정으로 분리하기 위하여 복합공정에 의하여 투과증발막을 제조하였다. 상업용 poly(dime-thylsiloxane) (PDMS) 막을 plasma 처리시키거나, polysulfone, poly(ether imide) 막을 지지체로 사용하여 plasma 처리 및 PDMS 코팅의 복합공정을 적용하였다. 헥산계열과 실란계열 유기 화합물을 사용하여 PDMS막을 plasma 처리하였을 경우 막 표면의 소수성을 증가시켜서 부탄을 선택도가 12.56까지 향상되었다. 반면에 투과량은 막 표면의 소수성 증대와 free volume의 변화로 인해 $1.15kg/m^2{\cdot}hr$까지 감소되어 선택도와 반대의 성향을 나타내었다. 막의 소수성이 증가함에 따라 접촉각과 상대적 sorption 비가 증가하였고, 부탄을 선택도도 향상되었다. PDMS 코팅 용액에서 prepolymer의 함량이 높을수록 부탄올 선택도가 증가하였다. PDMS 코팅과 plasma 처리 공정의 순서에 따른 영향을 조사하였다. 부탄올과 노르말 헥산으로 plasma 처리할 경우 plasma처리, PDMS 코팅 순으로 제조된 막의 분리 성능이 우수하였고 hexamethyldisilane과 hex-amethyldisilazane을 사용한 경우에는 역순으로 제조된 막의 분리 성능이 더 우수한 것으로 나타났다.

고성능 PRO 모듈 개발 및 운전조건이 모듈 성능에 미치는 영향 (The development of high-performance PRO module and effects of operating condition on the performance of PRO module)

  • 한만재;심연주;이종화
    • 상하수도학회지
    • /
    • 제31권4호
    • /
    • pp.303-310
    • /
    • 2017
  • Pressure retarded osmosis(PRO) has attracted much attention as potential technology to reduce the overall energy consumption for reverse osmosis(RO) desalination. The RO/PRO hybrid process is considered as the most logical next step for future desalination. The PRO process aims to harness the osmotic energy difference of two aqueous solutions separated by a semipermeable membrane. By using the concentrated water(RO brine) discharged from existing RO plants, the PRO process can effectively exploit a greater salinity gradient to reduce the energy cost of processing concentrated water. However, in order to use RO brine as the draw solution, PRO membrane must have high water flux and enough mechanical strength to withstand the high operational pressure. This study investigates the development of a thin film composite PRO membrane and spiral wound module for high power density. Also, the influence of membrane backing layer on the overall power density was studied using the characteristic factors of PRO membranes. Finally, the performance test of an 8-inch spiral wound module was carried out under various operating conditions(i.e. hydraulic pressure, flow rate, temperature). As the flow rate and temperature increased under the same hydraulic pressure, the PRO performance increased due to the growth of water permeability coefficient and osmotic pressure. For a high performance PRO system, in order to optimize the operating conditions, it is highly recommended that the flow pressure be minimized while the flow rate is maintained at a high level.

막 분리와 흡착 과정을 통한 해수로부터의 주요 광물 회수: 리뷰 (Recovery of Valuable Minerals from Sea Water by Membrane Separation and Adsorption Process: A Review)

  • 전성수;라즈쿠마 파텔
    • 멤브레인
    • /
    • 제32권1호
    • /
    • pp.13-22
    • /
    • 2022
  • 세계적인 에너지 수요의 증가는 통제할 수 없는 환경 오염을 야기하고 있다. 화석 연료에 대한 수요와 그로 인한 탄소 배출이 지구 온난화와 기후 변화로 이어진 것이다. 핵에너지는 청정 에너지를 생산하는 대체 자원이지만 핵연료 채굴은 유해한 화학물질과 관련이 있다. 반면에 막 분리 과정을 통해 바닷물에서 중요 광물을 채굴하는 것은 효율적이며 친환경적이다. 분리와 흡착을 통해 해수로부터 주요 광물을 채굴하는 것은 또 다른 효율적인 과정이다. 희토류 원소에서 악티늄족을 회수하는 것은 매우 어렵고 고비용의 과정이다. 압력 기반 막 분리 과정은 친환경적일 뿐만 아니라 경제적으로 실현가능한 과정이기도 하다. 본 리뷰에서 다루는 막 공정에는 폴리에테르 설폰, 폴리아미드, 폴리이미드, 폴리아미독신 및 하이브리드 막이 있다. 또한 흡착 공정의 경우, 주로 아미독심 종류의 흡착제가 논의될 것이다.

Detection of Campylobacter jejuni in food and poultry visors using immunomagnetic separation and microtitre hybridization

  • Simard, Ronald-E.
    • 한국어업기술학회:학술대회논문집
    • /
    • 한국어업기술학회 2000년도 춘계수산관련학회 공동학술대회발표요지집
    • /
    • pp.71-73
    • /
    • 2000
  • Campylobacter jejuni is most frequently identified cause of cause of acute diarrhoeal infections in developeed countries, exceeding rates of illness caused by both salmonella and shigilla(Skirrow, 1990 ; Lior 1994). Previous studies on campylobacter jejuni contamination of commercial broiler carcasses in u.s.(Stern, 1992). Most cases of the disease result from indirect transmission of Campylobactor from animals via milk, water and meat. In addition to Campylobactor jejuni. the closely relates species Campylobactor coli and Campylobactor lari have also been implicated as agents of gastroenteritis in humans. Campylobactor coli represented only approximately 3% of the Campylobactor isolates from patients with Campylobactor enteritis(Griffiths and Park, 1990) whereas Campylobactor coli is mainly isolated from pork(Lmmerding et al., 1988). Campylobactor jejuni has also been isolated from cases of bacteremia, appendicitis and, recently, has been associated with Guillai-Barre syndrome(Allos and Blaser, 1994; von Wulffen et al., 1994; Phillips, 1995). Studies in volunteers indicated that the infectious dose for Campylobactor jejuni is low(about 500 organisms)(Robinson, 1981). The methods traditionally used to detect Campylobactor ssp. in food require at least two days of incubation in an enrichment broth followed by plating and two days of incubation on complex culture media containing many antibiotics(Goossens and Butzler, 1992). Finnaly, several biochemical tests must be done to confirm the indentification at the species level. Therfore, sensitive and specific methods for the detection of small numbers of Campylobactor cells in food are needed. Polymerase chain reaction(PCR) assays targeting specific DNA sequences have been developed for the detection of Campylobactor(Giesendorf and Quint, 1995; Hemandex et al., 1995; Winter and Slavidk, 1995). In most cases, a short enrichment step is needed to enhance the sensitivity of the assay prior to detection by PCR as the number of bacteria in the food products is low in comparison with those found in dinical samples, and because the complex composition of food matrices can hinder the PCR and lower its sensitivity. However, these PCR systems are technically demanding to carry out and cumbersome when processing a large number of samples simutaneously. In this paper, an immunomagnetic method to concentrate Campylobactor cells present in food or clinical samples after an enrichment step is described. To detect specifically the thermophilic Campylobactor. a monoclonal antibody was adsorbed on the surface of the magnetic beads which react against a major porin of 45kDa present on the surface of the cells(Huyer et al., 1986). After this partial purification and concentration step, detection of bound cells was achieved using a simple, inexpensive microtitre plate-based hybridization system. We examined two alternative detection systems, one specific for thermophilic Campylobactor based on the detection of 23S rRNA using an immobilized DNA probe. The second system is less specific but more sensitive because of the high copy number of the rRNA present in bacterial cell($10^3-10^4$). By using specific immunomagnetic beads against thermophilic Campylobactor, it was possible to concentrate these cells from a heterogeneous media and obtain highly specific hybridization reactions with good sensitivity. There are several advantages in using microtitre plates instead of filter membranes or other matrices for hybridization techniques. Microtitre plates are much easier to handle than filter membranes during the adsorption, washing, hybridization and detection steps, and their use faciilitates the simultanuous analysis of multiple sample. Here we report on the use of a very simple detection procedure based on a monoclonal anti-RNA-DNA hybrid antibody(Fliss et al., 1999) for detection of the RNA-DNA hybrids formed in the wells.

  • PDF

광촉매 반응기용 세라믹 막에의 TiO2 층 형성과 성능평가 (In-situ TiO2 Formation and Performance on Ceramic Membranes in Photocatalytic Membrane Reactor)

  • 리즈완 아마드;김진규;김종학;김정환
    • 멤브레인
    • /
    • 제27권4호
    • /
    • pp.328-335
    • /
    • 2017
  • 메조포러스 공극구조를 갖는 광촉매 멤브레인은 다양한 환경기술에 적용될 수 있다. 본 연구에서는 $TiO_2$ 층을 형성시킨 광촉매 반응기용 세라믹 멤브레인을 개발하고 이를 염색용액 처리에 적용하였다. 높은 공극률과 균질성을 지닌 $TiO_2$ 광촉매층을 그라프트 공중합체를 사용하여 제조하였다. 멤브레인은 광촉매 반응기와 멤브레인 여과를 결합시킨 하이브리드 광촉매 반응기에 성공적으로 적용하였다. 실험결과 정렬된 구조의 $TiO_2$ 층이 $Al_2O_3$ 지지체에 형성되었다. $TiO_2$ 층 형성 후 제조된 세라믹 분리막의 순수 투과도는 형성된 광촉매 층 저항으로 감소하였다. 정렬된 구조의 $TiO_2$ 층은 UV 결합 시 5시간 안에 완벽한 염색용액 분해를 달성시킬 수 있었다. 광촉매 멤브레인의 염색용액 분해는 Langmuir-Hinshelwood 흡착 모델로 잘 설명할 수 있었다. 또한 $TiO_2$ 층이 고정화된 세라믹 멤브레인의 model Congo Red에 대한 1차 속도상수는 $Al_2O_3$ 지지체 단독인 경우에 비해 약 6배 정도 큰 값을 나타내었다(0.0081 vs. $0.0013min^{-1}$).

분리막 농축수에 포함된 Na를 이용한 저농도 NaOH 용액의 합성 (Synthesis of Low Concentration of NaOH Solution using $Na^+$ ion in the Concentrated Water from Membrane Separation Process)

  • 이윤지;박연진;최정학;신원식;최상준;전웅
    • Korean Chemical Engineering Research
    • /
    • 제49권6호
    • /
    • pp.810-815
    • /
    • 2011
  • 역삼투막을 이용한 해수담수화 과정에서 발생하는 농축수 내에는 고농도의 $Na^+$ 이온이 포함되어 있으며, 이를 경제성 있는 NaOH 용액으로 회수하기 위해 전기분해를 적용하였다. 실험실 규모의 전기분해장치를 구성하여 실험조건의 변화에 따른 NaOH 용액의 합성농도를 비교하였다. 이온교환막의 종류(CIMS 막, Nafion 막), 이온교환막의 전처리 유무, 농축수의 유입 유속(73 mL/min ~ 200 mL/min), 모의 농축수의 농도(1.5 M ~ 5 M), 전류(1.5 A, 2 A) 등의 인자를 변화시켜 전기분해를 수행한 결과, CIMS 막은 Nafion 막에 비하여 NaOH 용액의 합성효율은 뛰어나지만, 장시간운전 이후에 염소가스에 대한 내구성이 떨어졌다. 또한, 모의 농축수의 $Na^+$ 이온농도와 전류가 높을수록 NaOH 용액의 합성효율은 증가하였으나, 모의 농축수의 유입 유속이 낮을수록 합성효율은 증가하였다.