• ETRI Journal
• /
• v.38 no.4
• /
• pp.645-653
• /
• 2016

This paper demonstrates the performance of a metal-substrate power module with multiple fabricated chips for a high current electrical application, and evaluates the proposed module using a 1.5-kW sinusoidal brushless direct current (BLDC) motor. Specifically, the power module has a hybrid structure employing a single-layer heat-sink extensible metal board (Al board). A fabricated motor driver IC and trench gate DMOSFET (TDMOSFET) are implemented on the Al board, and the proper heat-sink size was designed under the operating conditions. The fabricated motor driver IC mainly operates as a speed controller under various load conditions, and as a multi-phase gate driver using an N-ch silicon MOSFET high-side drive scheme. A fabricated power TDMOSFET is also included in the fabricated power module for three-phase inverter operation. Using this proposed module, a BLDC motor is operated and evaluated under various pulse load tests, and our module is compared with a commercial MOSFET module in terms of the system efficiency and input current.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2593-2598
• /
• 2011

Polyphenols (PPs) are known as antioxidant compounds having benign biological activities. In this paper, a series of hybrid molecules between the free or acetyl protected polyphenol compounds were synthesized and their in vitro antioxidant activity (DPPH assay) and cholinesterase [acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE)] inhibition activities were evaluated. As expected, free phenolic hybrid compounds (6 and 8) showed better antioxidant activity than acetyl protected hybrid compounds (5 and 7) from DPPH assay. But the contrast result was obtained from BuChE inhibition assay. Acetyl protected hybrid compounds (5 and 7) showed better inhibition activity for BuChE than free phenolic hybrid compounds (6 and 8). Specifically, 10 (AcFA-AcFA) were shown as an effective inhibitor of BuChE ($IC_{50}=2.3{\pm}0.3{\mu}M$) and also had a great selectivity for BuChE over AChE (more than 170 fold). Inhibition kinetic studies with acetyl protected compounds (5, 7, 9, and 10) indicated that 5, 7 and 10 are a hyperbolic mixed-type inhibition and 10 is a competitive inhibition type. The binding affinity (Ki) value of 10 to BuChE is $2.32{\pm}0.15{\mu}M$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.4
• /
• pp.9-16
• /
• 2000

This paper shows the performance of a multiuser detection DS-CDMA receiver based on of the hybrid scheme of parallel interference cancellation (PIC) and successive interference cancellation (SIC). The proposed hybrid interference cancellation is presented and is compared with existing PIC, SIC and Hybrid It of other type schemes. The performance criteria used for comparison are complexity, delay and average bit error rate (BER) performance obtained by simulation in Rayleigh-fading channel (Jake's model) with additive white Gaussian noise (AWGN). In the proposed hybrid IC, the BER performance approximates the one of SIC and the delay is half of the SIC. And the number of cancellation of the hybrid It is reduced about a fourth.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.7 s.112
• /
• pp.739-745
• /
• 2006

This paper presents a novel type of hybrid dispensing head for IC fabrication and surface mount technology. The proposed mechanism consists of solenoid valve and piezoelectric stack as actuators, and provides positive-displacement and jet dispensing. The positive-displacement dispensing can produce desired adhesive amount without viscosity effect, while the jet dispensing can produce high precision adhesive amount. In order to determine the relationship between required voltage of the piezoelectric actuator and needle displacement, both static and dynamic analysis are undertaken, In addition, finite element analysis is performed in order to find optimal design parameters. Dispensing flow rate and pressure in the chamber are evaluated through fluid dynamic model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.821-826
• /
• 2006

This paper presents a novel type of hybrid dispensing head for IC fabrication and surface mount technology. The proposed mechanism consists of solenoid valve and piezoelectric stack as actuators, and provides positive-displacement and jet dispensing. The positive-displacement dispensing can produce desired adhesive amount without viscosity effect, while the jet dispensing can produce high precision adhesive amount. In order to determine the relationship between required voltage of the piezo actuator and needle displacement, both static and dynamic analysis are undertaken, In addition, finite element analysis is performed in order to find optimal design parameters. Dispensing flow rate and pressure in the chamber are evaluated through fluid dynamic model.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1143-1145
• /
• 2000

In this paper, it presents the design and implementation of a Microstep control IC using Programmable Logic Device(PLD). A Microstep driver is implemented with a 5-phase hybrid stepping motor, which has a Pentagon winding, power MOSFETs, and some devices to improve the system characteristics. The Microstep driving method is used for high performance motion control, low vibration and low noise in motor control system. The improvement of the electrical and mechanical driving characteristic of a step motor is achieved by applying microstep driver.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.183-186
• /
• 2011

In this paper, we present some results of power analyses, and weight estimation on electric propulsion systems for Personal Air Vehicles(PAV) applications. When hybrid electric propulsion is adopted, its power performance using fuel cells and batteries is inferior to that of internal combustion engines for 1,000 kg PAV. However, hybrid electric propulsion systems may replace IC engines when energy density and power density is over $0.75kW{\cdot}hr/kg$and 2.5 kW/kg, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.312-316
• /
• 1987

A simple hybrid circuit to control the two-phase AC motor of the nut-runners which employ the tightening torque control system is described in this paper. The circuit has emphasis on the low-cost implementation. The circuit constitutes of the V/F converter using a timer IC, the pulse width modulator using the fastening torque signal and the two-phase logic sequencer.

• Journal of Sensor Science and Technology
• /
• v.5 no.1
• /
• pp.43-50
• /
• 1996

This paper presents a manufacture of the multiple subjects biotelemetry system using custom CMOS IC fabricated $1.5{\mu}m$ n-well process technology. The implantable circuits of the system except sensor interface circuits including FM transmitter are fabricated on a single chip with the sire of $4{\times}4mm^{2}$. It is possible to assemble the implantable system in a hybrid package as small as $3{\times}3{\times}2.5cm$ by using this chip, It's main function is to enable continuous measurement simultaneously up to 7-channel physiological signals from the selected one among 8 subjects. Another features of this system are to enable continuous measurement of physiological signals, and to accomplish ON/OFF switching of an implanted battery by subject selection signal with command signal from the external circuit. If this system is coupled with another appropriate sensors in medical field, various physiological parameters such as pressure, pH and temperature are to be measured effectively in the near future.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.324-329
• /
• 2011

In recent years, the performance and functions of portable devices has increased. so it requires more power efficiency and energy density while using the battery for a long time. therefore Battery pack which are made up from several battery cells in series in order to achieve higher operating voltage is being used. when using a Li-ion battery, we need a protection circuit to protect from overcharge, over discharge, high temperature and over current. Also, when using battery pack, we need to Cell voltage balancing circuit that each cell in tune with the balancing. In this paper, the proposed IC is applicable by mobile devices as well as E-bike, hybrid vehicles, electric vehicles, and is expected to contribute to the development of domestic PMIC.