• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권4호
• /
• pp.391-396
• /
• 2006

The CT number is called Hounsfield unit(HU). Generally HU has a score between +1000 from -1000, and it is standardized usingthe air(-1000), water(0), and compact bone(+1000). Hounsfield Unit to standardize the density in computed tomography using the air and water has been used to analysis of lesion in other medical field. Computed tomography is popular method to analysis of lesion in oral & maxillofacial field but the analysis about density of lesion by Hounsfield unit is still obscure. For this study, computed tomography taken in Dankook University Dental Hospital and Hounsfield unit was measured to compare the difference of jaw bone lesion as cystic lesion, benign tumor, malignant tumor.

• Imaging Science in Dentistry
• /
• 제39권3호
• /
• pp.115-120
• /
• 2009

Purpose : The purpose of this study was to determine a conversion coefficient for Hounsfield Units(HU) to material density ($g\;cm^{-3}$) obtained from cone-beam computed tomography ($CBMercuRay^{TM}$) data and to measure the hard tissue density based on the Hounsfield scale on dental head phantom. Materials and Methods : CT Scanner Phantom (AAPM) equipped with CT Number Insert consists of five cylindrical pins of materials with different densities and teflon ring was scanned by using the $CBMercuRay^{TM}$ (Hitachi, Tokyo, Japan) volume scanner. The raw data were converted into DICOM format and the HU of different areas of CT number insert measured by using $CBWorks^{TM}$. Linear regression analysis and Student t-test were performed statistically. Results : There was no significant difference (P > 0.54) between real densities and measured densities. A linear regression was performed using the density, $\rho$($g\;cm^{-3}$), as the dependent variable in terms of the HU (H). The regression equation obtained was $\rho=0.00072H-0.01588$ with an $R^2$ value of 0.9968. Density values based on the Hounsfield scale was $1697.1{\pm}24.9\;HU$ in cortical bone, $526.5{\pm}44.4\;HU$ in trabecular bone, $2639.1{\pm}48.7\;HU$ in enamel, $1246.1{\pm}39.4\;HU$ in dentin of dental head phantom. Conclusion : CBCT provides an effective option for determination of material density expressed as Hounsfield Units.

• 한국의학물리학회지:의학물리
• /
• 제30권4호
• /
• pp.160-166
• /
• 2019

This study examined the clinical use of two newly installed computed tomography (CT) simulators in the Department of Radiation Oncology. The accreditation procedure was performed by the Korean Institute for Accreditation of Medical Imaging. An Xi R/F dosimeter was used to measure the CT dose index for each plug of the CT dose index phantom. Image qualities such as the Hounsfield unit (HU) value of water, noise level, homogeneity, existence of artifacts, spatial resolution, contrast, and slice thickness were evaluated by scanning a CT performance phantom. All test items were evaluated as to whether they were within the required tolerance level. CT calibration curves-the relationship between CT number and relative electron density-were obtained for dose calculations in the treatment planning system. The positional accuracy of the lasers was also evaluated. The volume CT dose indices for the head phantom were 22.26 mGy and 23.70 mGy, and those for body phantom were 12.30 mGy and 12.99 mGy for the first and second CT simulators, respectively. HU accuracy, noise, and homogeneity for the first CT simulator were -0.2 HU, 4.9 HU, and 0.69 HU, respectively, while those for second CT simulator were 1.9 HU, 4.9 HU, and 0.70 HU, respectively. Five air-filled holes with a diameter of 1.00 mm were used for assessment of spatial resolution and a low contrast object with a diameter of 6.4 mm was clearly discernible by both CT scanners. Both CT simulators exhibited comparable performance and are acceptable for clinical use.

• 한국방사선학회논문지
• /
• 제16권6호
• /
• pp.673-680
• /
• 2022

본 연구에서는 PLA를 기반으로 알루미늄, 나무, 구리, 카본, 대리석이 각각 20% 함유된 재질들의 CT number를 분석하고 영상에 어떠한 영향을 미치는지 분석하고자 하였다. 보급형 3D 프린터를 이용하여 5×30×30 ㎣(두께×직경×높이)의 원기둥 모양 팬텀을 제작하였다. 관전압을 80, 100, 120 kV로 변화시키고, 관전류초를 100, 200 mAs로 변화시켜 테이블 중앙에 놓인 팬텀을 총 6가지 조건으로 횡단 스캔하였다. Image J를 이용하여 원형의 ROI를 설정하고 물질부 CT number의 정량값과 주변부 CNR의 정량값을 구하였다. 물질부의 CT number 평균값은 PLA-나무20%, PLA-대리석20%, PLA-카본20%, PLA-100%, PLA-알루미늄20%, PLA-구리20% 순으로 높아졌고(p<0.05), kV 증가에 따른 CT number는 음의 상관성을 확인하였다. 주변부의 CNR값은 PLA-대리석20%, PLA-구리20%, PLA-카본20%, PLA-나무20%, PLA-알루미늄20%, PLA-100% 순으로 증가 됨을 확인하였다(p<0.05). 각 재료별 HU 값과 유사한 인체 장기는 PLA-구리20%는 치밀골, PLA-알루미늄20%는 해면골, PLA-100%는 응고된 혈액, PLA-카본20%와 PLA-대리석20%는 간, 근육, 비장, PLA-나무20%는 지방과 유사한 값이었다. 또한 모든 재료에서 필라멘트 주변부 영상을 흐리게 하는 흐림 현상을 확인하였고 특히 PLA-100%에서 영상 주변부 흐림 현상이 가장 많은 것을 확인하였다. 따라서 의료용팬텀 제작의 재질을 선정할 때 목표 장기의 HU 값을 반영하고, 팬텀 주변부의 흐림 현상을 고려하는 것이 바람직하다고 판단하며 본 연구가 기초 자료를 제공할 수 있을 것이라 사료된다.

• Tuberculosis and Respiratory Diseases
• /
• 제43권4호
• /
• pp.519-526
• /
• 1996

연구배경 : 양성종양과 악성종양은 혈관분포의 차이와 임파선 발달이 차이로 혈관조영시 조영증강의 정도가 다르다. 이에 연구자는 고립성 폐결절 환자에서 SRCT을 시행하여 조영증강의 정도를 관찰하였다. 방법 : 대상은 1995년에 원주의과대학 호흡기내과에 내원하여 고립성 폐결절로 진단받고 조직검사를 시행받은 환자 16예였다. 고립성 폐결절 환자에서 조영제 주입후 SRCT를 시행하여 조영증강의 정도를 45초, 2분, 5분에 측정하여, 조직학적 및 임상적으로 진단된 양성결절 8예와 수술후 악성결절로 확진된 8예 사이에 그 차이를 관찰하였다. 결과 : 1. 대상 환자의 평균연령은 52세로, 남녀는 11:5 예였다. 2. 질환별로는 결핵성 결절이 8예, 선암이 6예, 상피세포암이 2예였다. 3. 폐결절의 평균 크기는 $2.86{\pm}1.11cm$(1.8-5cm)이었으며 양성결절은 $2.98{\pm}1.4cm$, 악성결절은 $2.76{\pm}0.84cm$으로 차이는 없었다(p=0.75). 조영제 투여전 평균 CT numbed (hounsfield unit)는 $36.8{\pm}17.2$ HU 이며, 양성 결절 $38.1{\pm}23$ HU 과 악성결절 $35.1{\pm}15.3$ HU 으로 두군 간의 차이는 없었다(p=0.52). 조영제 투여 시작후 45초에 조영증강(조영전과 비교한)은 평균 $12.1{\pm}1.3$ HU 이며, 양성결절 $6.22{\pm}10$ HU 과 악성결절 $19.6{\pm}7.9$ HU으로 두군간의 유의한 차이가 있었다 (p=0.008). 조영제 투여 시작후 2분의 조영증강은 평균 $21.1{\pm}20.8$ HU 이며, 양성 결절 $6.75{\pm}15$ HU 과 악성결절 $34.0{\pm}19.2$ HU 으로 악성결절에서 더 높은 경향을 보였다 (p=0.007). 조영제 투여 시작후 5분의 조영증강은 평균 $21.8{\pm}1.9.7$ HU 이며, 양성 결절 $7.75{\pm}17$ HU 과 악성결절 $34.0{\pm}15.4$ HU 으로 악성결절에서 더 높았다(p=0.011). 조영증강의 시판별 변화는 조영제 투여전과 투여시작후 45초, 2분, 5분의 CT number는 악성결절의 경우는 $35.1{\pm}15.3$ HU, $54.7{\pm}15.6$ HU, $69.1{\pm}24.2$ HU, $69.1{\pm}16.4$ HU 으로 계속적인 증가를 유지하였으나 양성 결절에서는 각각 $38.1{\pm}23$ HU, $44.3{\pm}34$ HU, $44.8{\pm}24$ HU, $44.8{\pm}32$ HU 으로 큰 변화가 없었다. 4. 조영증강과 다른 요인간의 상관관계 : 결절의 크기와 조영증강 사이의 상관관계는 없었으며(r=0.21, p=0.43) 환자의 나이와 조영증강 사이에도 상관관계는 없었다(r=0.21, p=0.42). 결론 : 이상의 결과로 고립성 폐결절에서 SRCT상 시간에 따른 조영증가는 악성결절에서 단시간내 더 현저하여 양성결절과 악성결절을 감별하는데 도움이 될 것으로 생각된다.

• 한국방사선학회논문지
• /
• 제12권7호
• /
• pp.879-886
• /
• 2018

3-dimensional(D) 프린터는 컴퓨터로 모델링 한 데이터를 바탕으로 3차원의 입체 물체를 출력할 수 있는 장비이다. 이러한 특징을 방사선과학 분야와 융합하여, CT 데이터를 이용한 뼈 모형 X선 팬텀제작 등에 활용되고 있다. 본 연구는 기존의 Pelvis팬텀을 CT 스캔하고 얻어진 데이터로 Fused Filament Fabrication(FFF) 3D 프린터의 소재인 PLA, Wood, XT-CF20, Glow fill, Steel 필라멘트를 이용하여, 뼈 모형 팬텀을 제작하였다. 기존의 Pelvis 팬텀과 3D 프린터로 제작된 5가지 재질의 팬텀을 동일한 조건으로 CT 스캔 하고 얻어진 영상에서 Hounsfield Unit(HU)을 측정하였으며, 진단용X선 발생장치를 이용하여 SI, SNR을 측정하여 각 팬텀을 비교 분석하였다. 그 결과 사지 X선 검사 조건 내에서 X선 팬텀은 glow fill 필라멘트가 가장 적합하다는 것을 알 수 있었다. 본 연구의 기반으로 필라멘트의 특성들을 알 수 있었으며, X선 팬텀 제작에 대한 실용성을 확인하였다.

• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.92-98
• /
• 2021

Purpose: This study automatically discriminates homogeneous and structure edge regions on computed tomography (CT) images, and it evaluates the noise level and edge preservation ratio (EPR) according to the different types of iterative reconstruction (IR). Methods: The dataset consisted of CT scans of 10 patients reconstructed with filtered back projection (FBP), statistical IR (iDose⁴), and iterative model-based reconstruction (IMR). Using the 10th and 85th percentiles of the structure coherence feature, homogeneous and structure edge regions were localized. The noise level was estimated using the averages of the standard deviations for five regions of interests (ROIs), and the EPR was calculated as the ratio of standard deviations between homogeneous and structural edge regions on subtraction CT between the FBP and IR. Results: The noise levels were 20.86±1.77 Hounsfield unit (HU), 13.50±1.14 HU, and 7.70±0.46 HU for FBP, iDose⁴, and IMR, respectively, which indicates that iDose⁴ and IMR could achieve noise reductions of approximately 35.17% and 62.97%, respectively. The EPR had values of 1.14±0.48 and 1.22±0.51 for iDose⁴ and IMR, respectively. Conclusions: The iDose⁴ and IMR algorithms can effectively reduce noise levels while maintaining the anatomical structure. This study suggested automated evaluation measurements of noise levels and EPRs, which are important aspects in CT image quality with patients' cases of FBP, iDose⁴, and IMR. We expect that the inclusion of other important image quality indices with a greater number of patients' cases will enable the establishment of integrated platforms for monitoring both CT image quality and radiation dose.

• Archives of Plastic Surgery
• /
• 제35권4호
• /
• pp.423-430
• /
• 2008

Purpose: Computed tomography theoretically should improve detection of foreign bodies and provide more information of adjacent soft tissues. And the CT scanner and PACS program proved to be an excellent instrument for detection and localization of most facial foreign bodies above certain minimum levels of detectability. The severity of injury in penetrating trauma to the face, it is often underestimated by physical examination. Diagnosis of a retained foreign object is always critical. Methods: From March, 2005 to February 2008 a study was done with 200 patients who had facial trauma. Axial and coronal CT images were obtained with a General Electric(Milwaukee, Wis) 9800 CT scanner at 130 kV, 90 mA, with a 2-mm section thickness and a $512{\times}512$ matrix. Results: Axial and coronal CT images at various window widths should be used as the first imaging modality to detect facial foreign bodies. The attenuation coefficients for the metallic and nonmetallic foreign bodies ranged from -437 to +3071 HU. As a general rule, metallic foreign bodies produced more Hounsfield artifacts than nonmetallic foreign bodies, thus providing a clue to their composition. All of the metallic foreign bodies were represented by a single peak and had a maximum attenuation coefficient of +3071 HU. Of the nonmetallic foreign bodies, glass had an attenuation coefficient that ranged from +105 to +2039, while plastic had a much lower coefficient that ranged from -62 to -35. wood had the lowest range of attenuation coefficients: -491 to -437. Conclusion: The PACS program allows one to distinguish metallic from nonmetallic foreign bodies and to individually identify the specific composition of many nonmetallic foreign bodies. This program does not, however, allow identification of the specific composition of a metallic foreign body. We recommend this type of software program for CT scanning of any patient with an injury to the face in which a foreign body is suspected.

• 대한방사선치료학회지
• /
• 제18권2호
• /
• pp.75-80
• /
• 2006

목 적: 방사선치료에 있어 종양조직이나 정상조직의 정확한 선량계산은 치료의 성패를 좌우하는 가장 큰 요인이다. 이로 인해 방사선치료계획은 컴퓨터 단층 영상의 재구성을 통한 불균질 조직에 선흡수계수를 밀도로 변환하여 CT 번호에 의한 선량 보정이 유효하게 이루어지고 있다. 대상 및 방법: 이에 본 연구는 불균질 조직등가 팬톰을 제작하여 현재 사용 중인 방사선 치료 계획시스템을 이용한 CT 번호의 측정과 질량밀도를 계산하여 물을 기준으로 상대값을 구하였다. 또한 실제 방사선 조사 시 측정된 선량(nC)과 CT영상을 이용한 치료계획 시 선량(PDD)을 상대적으로 비교함으로써 실제 CT 번호를 이용한 불균질 조직의 보정에 대한 유용성과 정확성을 평가하고자 한다. 결 과: 측정결과 CT 번호를 이용하여 계산된 조직등가물질의 질량밀도와 실제 질량밀도는 $0.005{\sim}0.069g/cm^3$의 차이를 보였으며, 방사선 치료계획 시 심부선량(PDD)과 방사선 치료 장치로 조사하여 측정된 선량의 상대오차는 $-2.8{\sim}+1.06%$로 3% 이내의 유효범위이내의 결과를 얻었다. 결 론: 본 실험은 CT 영상을 이용한 불균질 조직의 보정에 대한 유용성을 확인할 수 있었고, 방사선 치료 계획 장치의 정도 관리(Quality Assurance; QA)의 기본 틀을 제공할 수 있을 것으로 사료된다.

• International Journal of Oral Biology
• /
• 제42권4호
• /
• pp.155-161
• /
• 2017

Teeth and bones are highly mineralized tissues containing inorganic minerals such as calcium phosphate, and a growing number of evidences show that their mineral content is associated with many diseases. Although the quantification of mineral contents by micro-computed tomography(micro- CT) has been used in diagnosis and evaluation for treating bone diseases, its application for teeth diseases has not been well established. In this study, we attempted to estimate a usefulness of a high-resolution micro-CT in analysis of human teeth. The teeth were scanned by using the Skyscan 1172 micro-CT. In order to measure tooth mineral content, beam hardening effect of the machine was corrected with a radiopaque iodine-containing substance, iodoacetamide. Under the maximum resolution of $6.6{\mu}m$, X-ray densities in teeth and hydroxyapatite standards were obtained with Hounsfield unit (HU), and they were then converted to an absolute mineral concentration by a CT Analyzer software. In enamel layer of cusp area, the mean mineral concentration was about $2.14mg/mm^3$ and there was a constant mineral concentration gradient from the enamel surface to the dentinoenamel junction. In the dentin of middle 1/3 of tooth, the mean mineral concentration was approximately $1.27mg/mm^3$ and there was a constant mineral concentration gradient from the outer of root to the pulp side, ranging from 1.3 to $1.06mg/mm^3$. In decay region of dentin, the mineral content was gradually decreased from the intact inner side to the decayed surface. These results suggest that high-resolution micro-CT can be as a useful tool for non-invasive measurement of mineral concentration in teeth.