Browse > Article
http://dx.doi.org/10.7742/jksr.2018.12.7.879

A Study on the Fabrication of bone Model X-ray Phantom Using CT Data and 3D Printing Technology  

Yun, Myeong Seong (Department of Radiological Science, Eulji University)
Han, Dong-Kyoon (Department of Radiological Science, Eulji University)
Kim, Yeon-Min (Department of Radiological Science, Wonkwang health science University)
Yoon, Joon (Department of Radiological Science, Dongnam health University)
Publication Information
Journal of the Korean Society of Radiology / v.12, no.7, 2018 , pp. 879-886 More about this Journal
Abstract
A 3-dimensional (D) printer is a device capable of outputting a three-dimensional solid object based on data modeled in a computer. These features are utilized in the bone model X - ray phantom production etc using CT data by fusing with the radiation science field. A bone model phantom was made using data obtained by CT scan of an existing Pelvis phantom, using PLA, Wood, XT-CF20, Glow fill, Steel filaments which are materials of Fused Filament Fabrication (FFF) 3D printer.Measure Hounsfield Unit (HU) with images obtained by CT scan of the existing Pelvis phantom and five material phantoms made with 3D printer under the same conditions,SI and SNR were measured using a diagnostic X-ray generator, and each phantom was compared and analyzed.As a result, the X - ray phantom in the X - ray examination condition of the limb was found to be most suitable for the glow fill filament.The characteristics of the filament can be known to the base of this research and the practicality of X - ray phantom fabrication was confirmed.
Keywords
3D printer; filament; X-ray phantom; SNR; CT number;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 J. C. Yang, G. H. Park, T. W. Kim, J. I. Ryoo, M. P. Ji, J. O. Kim, "Clinical Features of Percutaneous Hemivertebroplasty in Patients with Osteoporotic Vertebral Compression Fractures," Korean journal of neurotrauma, Vol. 9, No. 1, pp.17-22, 2013.   DOI
2 T. S. Kim, "Cadaver Fitting Test of Mechanical Circulatory Assist Device Including Korean Artificial Heart (AnyHeart) in Korea," Anatomy & Cell Biology, Vol. 36, No. 4, pp.301-307, 2003.
3 M. H. Baek, G. K. Kim, S. Y. Han, C. M. Hwang, "Analysis of Trabecular Bone Strength using Finite Element Analysis," Korean journal of Osteoporosis, Vol. 9, No. 2, pp.180-185, 2011.
4 S.H. Kim, D. W. Kim, N. G. Kim, "Fall Simulation and Impact Absorption system for Development of Fracture Prevention System," Korean journal of Biomedical Engineering Letters, Vol. 31, No. 6, pp.438-448, 2010.
5 H. Y. Jeong, "Osteoporosis Diagnosis and Treatment 2007," Korean journal of Endocrinology, Vol. 23, No. 2, pp. 76-108, 2008.   DOI
6 H. G. Yoon, Y. B. Kim, G. W. Seo, "Postoperative Mortality and the Associated Factors in Elderly Patients with Hip Fracture," Korean Journal of Orthophaedic, Vol. 47, No. 6, pp. 445-451, 2012.
7 http://opendata.hira.or.kr/op/opc/olap4thDsInfo.do
8 http://www.law.go.kr/LSW//lsInfoP.do?lsiSeq=7984&chrClsCd=010202&urlMode=lsInfoP&efYd=19891230#0000
9 S.W. Chae, G.D. Kim, "Radiographic Diagnosis of the Osteoporotic Vertebral Fractures," Korean Journal of Osteoporosis, Vol. 11, No. 1, pp. 59-65, 2013.
10 B.J. Ahn, J.H. Lee, S.B. Lee, "A Study on Exposure to radiation of the patient who visited an emergency room at a University Hospital," Korean Journal Society of Radiology, Vol. 2, No. 3, pp. 23-34, 2007.
11 W. G. Oh, "valuation of Usefulness and Availability for Orthopedic Surgery using Clavicle Fracture Model Manufactured by Desktop 3D Printer," Korean Journal of Radiological Science and Technology, Vol. 37, No. 3, pp. 203-209, 2014.
12 S. J. Kang, M. H. Woo, "A Study on the Qualification Development of 3D Printing Operation Expert and 3D Printing Development Specialist," Korean Journal Academia-Industrial cooperation Society, Vol. 17, No. 10, pp. 37-38, 2016.   DOI
13 W. Choi, J.H. Woo, J.B. Jeon, S.S. Yoon, "Measurement of Structural Properties of PLA Filament as a Supplier of 3D Printer," Korean Society of Agricultural Engineers, Vol. 57, No. 6, pp. 141-152, 2015.   DOI
14 W. G. Oh, H. G. Kim, "Comparison of the Quality of Clavicle Fracture Three-dimensional Model Printing by Open Source and Commercial use Digital Imaging and Communications in Medicine Stereolithography File Conversion Program," Korean Journal of Radiological Science and Technology, Vol. 41, No. 1, pp. 1-6, 2018.   DOI
15 W. G. Oh, "Development of 3D Printer System for Making Customized Bone Models of Orthopedic Surgery Patient," Graduate school of Choongbook University, Republic of Korea, Doctoral dissertation. 2013.
16 G. Hilgers, T. Nuver, A. Minken, "The CT number accuracy of a novel commercial metal artifact reduction algorithm for large orthopedic implants," Journal of Applied Clinical Medical Physics, Vol. 15, No. 1, pp. 274-278, 2014.   DOI
17 S. H. Kang, Y. G. Lee, Y. J. Lee, "Feasibility of Application for Fast Non Local-Means (FNLM) Algorithm with Medical Imaging System: a Simulation Study," Korean journal of of The Institute of Electronics and Information Engineers, Vol. 55, No. 3, pp. 141-145, 2018.
18 J. Y. Bae, E. J. Choi, S. A. Kim, "A Study on the State-of-the-Art of 3D Printers," The korean society of computer and information, Vol. 21, No. 32, pp. 385-388, 2013.
19 Y. Altintas, D. Ertay, A. Yuen, "Synchronized material deposition rate control with path velocity on fused filament fabrication machines," Additive Manufacturing, Vol. 19, No. 1, pp. 205-213, 2018.   DOI
20 M. S. Yoon, "A Study on CT image wuality and dose measurement Phantom using 3D printer," Graduate school of Eulji University, Republic of Korea, Master's thesis, 2018.
21 W. J. Choi, J. B. Jeon, J. H. Woo, "Making Human Phantom for X-ray Practice with 3DPrinting," The Korean Journal Society of Radiology, Vol. 11, No. 5, pp. 371-377, 2017.