• Nuclear Engineering and Technology
• /
• 제49권3호
• /
• pp.581-591
• /
• 2017

Influences of hold time and stress ratio on cyclic creep properties of Grade 91 steel were systemically investigated using a wide range of cyclic creep tests, which were performed with hold times (HTs) of 1 minute, 3 minutes, 5 minutes, 10 minutes, 20 minutes, and 30 minutes and stress ratios (R) of 0.5, 0.8, 0.85, 0.90, and 0.95 under tension loading cycles at $600^{\circ}C$. Under the influence of HT, the rupture time increased to HT = 5 minutes at R = 0.90 and R = 0.95, but there was no influence at R = 0.50, 0.80, and 0.85. The creep rate was constant regardless of an increase in the HT, except for the case of HT = 5 minutes at R = 0.90 and R = 0.95. Under the influence of stress ratio, the rupture time increased with an increase in the stress ratio, but the creep rate decreased. The cyclic creep led to a reduction in the rupture time and an acceleration in the creep rate compared with the case of monotonic creep. Cyclic creep was found to depend dominantly on the stress ratio rather than on the HT. Fracture surfaces displayed transgranular fractures resulting from microvoid coalescence, and the amount of microvoids increased with an increase in the stress ratio. Enhanced coarsening of the precipitates in the cyclic creep test specimens was found under all conditions.

• PNF and Movement
• /
• 제14권1호
• /
• pp.15-21
• /
• 2016

Purpose: The purpose of the present study was to compare the effects of both general hold-relax techniques and hold-relax techniques using pumping on pain due to delayed muscle pain and on the range of motion (ROM) of joints. Methods: Thirty-nine young adult males and females were randomly assigned either to a hold-relax technique application group of 20 subjects or to a group of 19 subjects with hold-relax techniques applied using a pumping application. Tenderness thresholds, the ROM of joints, and pain intensities were measured on the biceps of the nondominant arm of the subjects in both groups before exercises were performed to induce delayed muscle pain. Tenderness thresholds were again measured 24hours, 48hours, and 72 hours after inducing delayed muscle pain. The relevant intervention methods were applied to the two groups after conducting the measurement at 48hours. As a statistical analysis method, repeated measure ANOVAs were conducted to examine the tenderness thresholds, ROMs of elbow joints, and pain intensities in the individual groups at the time points. Results: At 48 hours and 72 hours after application of the interventions, the general hold-relax technique application group showed greater changes in the tenderness thresholds, the ROMs of elbow joints, and the pain intensities than did the group applying hold-relax techniques using a pumping application (p>0.05). Conclusion: Based on the results of the present study, the application of hold-relax techniques is thought to have beneficial effects on pain resulting from delayed muscle pain and on limited ROMs of joints.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1317-1323
• /
• 2001

The circumstance is giving the blow against fishermen with the incoming-decreasing and the difficulty of crew's supply & demand and management. In addition, the depression of the external situation like the departure of WTO system and the plan of EEZ proclaim is forcing fishery into improving their fishing condition. By this international and domestic circumstance, development of the sea water cooling apparatus for fish hold storage is demanded sincerely. First of all, we Investigated load characteristics which based on development of sea water cooling system and optimum fish hold storage. The experimental results is as follows. In creasing the speed of compressor and mass blew rate of refrigerant, the temperature of NaCl solution is low. And the load characteristics experiment on fish hold storage outlet is as fellows. As time goes by, increasing the mass flow rate of NaCl solution, temperature difference between inlet and outlet is small in a model of fish hold storage. These results provide many useful informations applicable to an actual design of sea water cooling system and optimum fish hold storage.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1805-1810
• /
• 1991

This paper derives the upper and the lower bound of the mean cycle time and the mean service time of the class 6 and the class 4, within which the minimum utilization constrain of the class 4 is guaranteed. Also, derived are conditions under which the token bus network is stable or unstable. These bounds and stable conditions are represented in terms of the high priority token hold time, the token rotation time and the arrival rate and the total station number etc. This paper suggest a parameter tuning algorithm in a partially symmetric token bus network with two classes, which maximizes the token rotation time for a suitable high priority token hold time and at the same time meets the stability condition of the network, the real time constraint and the minimum utilization constraint of the class 4.

• 한국자기학회지
• /
• 제15권6호
• /
• pp.332-335
• /
• 2005

자속계의 경우 입력전압을 적분하여야 되기 때문에 연산증폭기의 입력 바이어스 전류가 있으면 적분기의 출력이 드리프트하게 된다. 본 연구에서는 이 드리프트를 자동으로 측정하고 보상하기 위하여 전압변동이 없는 디지털 sample and hold증폭기를 자속계에 도입하여 제작하였다. 개발한 자속계의 경우 적분기의 시간상수 $RC=10^{-3}$ s에서 드리프트가 $5{\times}10^{-8}\;Wb/s$ 이하였다.

• 한국정보전자통신기술학회논문지
• /
• 제1권1호
• /
• pp.7-12
• /
• 2008

본 논문에서는 심전도(ECG)에서 R-파의 추출을 어렵게 하는 기저선 변동의 최소화 방법을 연구하였다. 이 방법에서는 기저선의 변동을 최소화하기 위하여 심전도와 상승 기울기 추적파의 차신호를 이용하였다. 여기서 상승 기울기 추적파는 심전도 신호에서 기울기가 하강할 때는 그대로 심전도 신호를 추적하고 기울기가 상승할 때는 그 시작시간의 심전도 신호를 기준값으로 일정시간 유지시켜 준 후 다시 원신호를 추적하는 파형이다. 구현된 방법의 효용성을 검증하기 위하여 MIT/BIH 데이터 베이스의 심전도에 적용하여 그 실효성을 확인하였다.

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3424-3432
• /
• 1996

For mechanical system operating at high temperature, damage due to the interaction effect of creep and fatigue plays an important role. The objective of this paper is to develop a modified creep-fatigue damage model which separately analyzes the pure creep damage for hold time and the creep-fatigue interaction damage during startup and shutdown period. The creep damage was calculated by the general creep damage equation and the creep-fatigue interaction damage was calculated by the modified equation which is based on the frequency modified strain range method with strain rate term. In order to verify the proposed model, a service of high temperature low cycle fatigue tests were performed. The test specimens were made from inconel-718 superalloy and the test parameters were wave shape and hold time. A good agreement between the predicted lives based on the proposed model and experimentally obtained ones was observed.

• 한국전자파학회논문지
• /
• 제18권4호
• /
• pp.423-429
• /
• 2007

위성 DMB용 중계기는 위성으로부터 수신된 2.304 MHz의 기준 신호를 이용하여 10 MHz의 클럭 신호를 재생하여 시스템 동기 신호로 사용한다. 본 논문에서는 기준 신호가 잡음에 의해 흔들리거나 끊기더라도 안정된 신호를 재생할 수 있는 클럭 재생 모듈을 제안하였다. 제안된 모듈은 기존 방식에 비해 저가로 구현이 가능하며, 정기적인 주파수 조정이 필요 없는 장점이 있다. 본 논문에서는 클럭 재생용 IC를 CPLD를 이용하여 구현하였고, lock time을 짧게 하면서 동시에 출력 주파수의 hold over 시간을 늘리기 위해 새로운 루프 필터를 적용하였다. 제작된 모듈은 출력 주파수의 안정도가 0.01 ppm 이내일 경우 hold over 시간이 11초, 출력 전력은 -0.66 dBm, 위상잡음은 100 Hz 오프셋에서 -113 dBc/Hz로 측정되었다.

• 한국분무공학회지
• /
• 제24권3호
• /
• pp.114-121
• /
• 2019

The effect of injector driving current pattern on fuel injection rate of solenoid diesel common rail injector was studied by computer simulation. The time resolved fuel injection rate and injected quantity per stroke of a common rail injector driven with the five current patterns were computer simulated. The fuel injection rate and injected quantity per stroke according to the rail pressure and fuel injection period were also computer simulated. When the common rail injector was driven with the five driving current patterns of peak & hold, there was no difference in the fuel injection rate in the peak section regardless of all the current patterns of the five cases. On the other hand, the magnitude of the hold current value influenced the injection rate and injected quantity per stroke. That is, in the current pattern of three cases where the hold current value is equal to or more than a constant value of the peak current value, the fuel injection rates for the given common rail rail pressure and injection period are same one another. On the other hand, the current pattern of the two cases, in which the hold current value is smaller than a certain value, there is a large fluctuation in the fuel injection rate.

• 대한정형도수물리치료학회지
• /
• 제21권1호
• /
• pp.5-11
• /
• 2015

Background: The purpose of this study was to investigate the effects of Mulligan's straight leg raise with traction technique and hold-relax technique on flexibility of hamstring in people with shortened hamstring. Methods: Thirty two subjects participated in this study. The subjects were assigned to either the Mulligan's straight leg raise with traction technique group (n=16) or the hold-relax technique group (n=16). 90-90 straight leg raise test was performed for evaluation of hamstring shortening at initial time of study. After intervention, immediate effect (immediately after intervention) and lasted effect (60 min after intervention) were assessed. Results: In the both Mulligan's straight leg raise with traction technique and hold-relax technique groups, significant improvements on flexibility of hamstring was observed in immediately and 60 minute after intervention (p<.05). However, there are no significant difference was observed between groups (p>.05). Conclusion: In the results of this study, both Mulligan's straight leg raise with traction technique and hold-relax technique show immediately and 60 minute after evaluation effectiveness in flexibility of hamstring of people with shortened hamstring. In addition, although the difference is not statistically significant, Mulligan's straight leg raise with traction technique was more increased average extension angle of knee joint at 90-90 straight leg raise test than the hold-relax technique.