• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.95-101
• /
• 2016

This study proposes a multi-scale dynamic system reliability analysis of control system as a method of quantitative evaluation of its performance in probabilistic terms. In this second paper, we discuss the control effect of the viscous damper on the seismic performance of the structure-level failure. Since the failure of one structural member does not necessarily cause the collapse of the structural system, we need to consider a set of failure scenarios of the structural system and compute the sum of the failure probabilities of the failure scenarios where the statistical dependence between the failure scenarios should be taken into account. Therefore, this computation requires additional system reliability analysis. As a result, the proposed approach takes a hierarchial framework where the failure probability of a structural member is computed using a lower-scale system reliability with the union set of time-sequential member failures and their statistical dependence, and the failure probability of the structural system is again computed using a higher-scale system reliability with the member failure probabilities obtained by the lower-scale system reliability and their statistical dependence. Numerical results demonstrate that the proposed approach can provide an accurate and stable reliability assessment of the control performance of the viscous damper system on the system failure. Also, the parametric study of damper capacity on the seismic performance has been performed to demonstrate the applicability of the proposed approach through the probabilistic assessment of the seismic performance improvement of the damper system.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.116-122
• /
• 2014

This study proposes a system reliability analysis of rack storage facilities subjected to forklift colliding events. The proposed system reliability analysis consists of two steps: the first step is to identify dominant failure modes that most contribute to the failure of the whole rack facilities, and the second step is to evaluate the system failure probability. In the first step, dominant failure modes are identified by using a simulation-based selective searching technique where the contribution of a failure mode to the system failure is roughly estimated based on the distance from the origin in the space of the random variables. In the second step, the multi-scale system reliability method is used to compute the system reliability where the first-order reliability method (FORM) is initially used to evaluate the component failure probability (failure probability of one member), and then the probabilities of the identified failure modes and their statistical dependence are evaluated, which is called as the lower-scale reliability analysis. Since the system failure probability is comprised of the probabilities of the failure modes, a higher-scale reliability analysis is performed again based on the results of the lower-scale analyses, and the system failure probability is finally evaluated. The illustrative example demonstrates the results of the system reliability analysis of the rack storage facilities subjected to forklift impact loadings. The numerical efficiency and accuracy of the approach are compared with the Monte Carlo simulations. The results show that the proposed two-step approach is able to provide accurate reliability assessment as well as significant saving of computational time. The results of the identified failure modes additionally let us know the most-critical members and their failure sequence under the complicated configuration of the member connections.

• Child Health Nursing Research
• /
• v.8 no.3
• /
• pp.291-301
• /
• 2002

This study was performed to develop a scale of maternal conflict based on already established scales and the literature review. The major purpose of this study was to develop a scale of which contains difficulties which mother can feel to rearing her child and can be applied to mothers at home or employed mothers. 68 items were developed. For content validity test, the items were examined by 7 experts panel with Likert 4 scale. The 39 items were selected as high validity from 86% of the experts. The item number of each area and the misunderstanding words were corrected by advices of experts. 10 mothers again examined 39 items in order to correct the misunderstanding words and the long sentences. For reliability and factor analysis of 39 items, 496 mothers participated. 34 items were chosen because 5 items that corrected item-total correlation coefficient were lower than 0.2 were excluded by the result of reliability analysis. Factor analysis was done with 34items. 6 factors were classified higher than eigen value 1.0, 28 items were chosen because 6 items that factor loadings were lower than 0.4 were excluded. These factors were named as employment and caring for child(6 items), child education(5 items), support system for caring for child(4 items), interaction with mother and child(4 items), view of maternal role(5 items) and me as human being(4 items). Reliability analysis was done with 28 items. 1 item(36 number of factor 1) was excluded because corrected item-total correlation coefficient were lower than 0.2. Therefore, 27 items were chosen. Maternal Conflict Scale was contained 27 items. The corrected item-total correlation coefficient of 27 items were ranged from .2345 to .5240 and Cronbach alpha coefficient of those was .8207 by the results of reliability analysis. It can be evaluated that this scale had a high validity and reliability because of passing through an objective process of test.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.138-147
• /
• 2017

As the functions and structure of the system are complicated and elaborated, various types of structures are emerging to increase reliability in order to cope with a system requiring higher reliability. Among these, standby systems with standby components for each major component are mainly used in aircraft or power plants requiring high reliability. In this study, we consider a standby system with a multi-functional standby component in which one standby component simultaneously performs the functions of several major components. The structure of a parallel system with multifunctional standby components can also be seen in real aircraft hydraulic pump systems and is very efficient in terms of weight, space, and cost as compared to a basic standby system. All components of the system have complete operation, complete failure, only two states, and the system has multiple states depending on the state of the component. At this time, the multi-functional standby component is assumed to be in a non-operating standby state (Cold Standby) when the main component fails. In addition, the failure rate of each part follows the Weibull distribution which can be expressed as increasing type, constant type, and decreasing type according to the shape parameter. If the Weibull distribution is used, it can be applied to various environments in a realistic manner compared to the exponential distribution that can be reflected only when the failure rate is constant. In this paper, Markov chain analysis method is applied to evaluate the reliability of multi-functional multi-state standby system. In order to verify the validity of the reliability, a graph was generated by applying arbitrary shape parameters and scale parameter values through Excel. In order to analyze the effect of multi-functional multi-state standby system using Weibull distribution, we compared the reliability based on the most basic parallel system and the standby system.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.32 no.2
• /
• pp.71-78
• /
• 2021

Objectives: This study was conducted to investigate the reliability and validity of the Korean version of the DSM-5 Level 2 Cross-Cutting Symptom Measure-inattention [Swanson, Nolan and Pelham, version IV (SNAP-IV)] and anger [Patient-Reported Outcome Measurement Information System (PROMIS) Anger] for parents and guardians of children aged 6-17 years. Methods: We included 104 children and adolescents diagnosed with attention-deficit/hyperactivity disorder (ADHD), ADHD with anxiety and depression, depressive disorder, anxiety disorder, and tic disorder with somatic symptoms (ADHD=41, depression=9, anxiety=14, ADHD+anxious depression=11, tic+somatic symptoms=29). Their ages ranged from 8 years to 15 years. The participants' mothers completed the SNAP-IV, PROMIS Anger scale, Korean version of the IOWA Conners Rating Scale (K-IOWA), and Korean ADHD Rating Scale (K-ARS) so that the reliability and validity of the SNAP-IV and PROMIS Anger scales, which are DSM-5 scales for assessing inattention and anger of children and adolescents, could be examined. Results: The reliability coefficient of SNAP-IV (Cronbach's α) was 0.94. The correlation coefficients between SNAP-IV, K-IOWA inattention, and K-ARS inattention scores ranged from 0.73 to 0.86. The mean SNAP-IV scores of the ADHD and the ADHD+anxious depression groups were significantly higher than those of the anxiety and the tic+somatic symptoms groups. The reliability coefficient of the PROMIS Anger was 0.91. The correlation coefficient between PROMIS Anger and K-IOWA oppositional/defiant scores was 0.75. The PROMIS Anger mean score of the ADHD+anxious depression group tended to be higher than that of the other groups. Conclusion: These results suggest that the Korean version of the DSM-5 Level 2 Cross-Cutting Symptom Measure-inattention and anger for parent and guardian of child age 6-17 might be a reliable and valid test and may be useful for screening children and adolescents with ADHD.

• Journal of Korean Academy of Nursing
• /
• v.42 no.7
• /
• pp.1079-1086
• /
• 2012

Purpose: The purpose of this study was to develop and evaluate psychometric properties of the instrument, Resuscitation Self-Efficacy Scale for nurses. Methods: This was a methodological study for instrument development and psychometric testing. The initial item pool derived from literature review and experts resulted in 30 items linked to resuscitation self-efficacy. A convenience sample of 509 Korean nurses from eleven academic teaching hospitals participated in a survey to examine psychometric properties of the scale. To examine construct validity, exploratory factor analysis and known-group comparison were used. Cronbach's coefficient alpha was used to determine the scale's internal consistency reliability. Results: The final scale included 17 items with four-component structure termed 'Recognition', 'Debriefing and recording', 'Responding and rescuing', and 'Reporting'. These four factors accounted for 57.5% of the variance. Each subscale and the total scale demonstrated satisfactory internal consistency: .82; .88; .87; .83; and .91 respectively. Experienced nurses reported significantly higher self-efficacy mean scores in both total and subscales compared to new graduate nurses. Conclusion: The Resuscitation Self-Efficacy Scale for nurses yields reliable and valid results in appraising the level of resuscitation self-efficacy for Korean nurses. Further study is needed to test and refine the scale.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1128-1134
• /
• 2016

Demand response provides customer load reductions based on high market prices or system reliability conditions. One type of demand response, price-based program, induces customers to respond to changes in product rates. However, there are large-scale general and industrial customers that have difficulty changing their energy consumption patterns, even with rate changes, due to their electricity demands being commercial and industrial. This study proposes an in-house pricing model for large-scale general and industrial customers, particularly those with multiple business facilities, for self-regulating demand-side management and cost reduction. The in-house pricing model charges higher rates to customers with lower load factors by employing peak to off-peak ratios in order to reduce maximum demand at each facility. The proposed scheme has been applied to real world and its benefits are demonstrated through an example.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.2
• /
• pp.9-17
• /
• 2021

As interest in vocational competency development projects increases, support is increasing. In this study, in order to study ways to improve participation in vocational competency development training, related factors are selected and the main factors influencing them are derived. The main factors were influencing factors were identified and ways to improve participation rate of vocational competency development were studied. Variables were selected through prior research, and data were collected and analyzed through in-depth group interviews. Based on factor analysis and reliability analysis, as a result of confirming the factors that influence the plan for improving participation in vocational competency development training by applying the backward stage selection (condition) method of logistic regression analysis, the case of respect for minorities in the 7-point Likert scale The closer to 7 was, the higher the probability of being classified as having never participated, and the other factors except minority respect, Likert scale closer to 7 indicates higher probability of bening classified as having never participated, except for the minority respect factor. Therefore, it was confirmed that lowering the scale of the factor of respect for minority, which is job satisfaction, and increasing the factors of individual characteristics such as annual salary and organizational commitment, training system for job satisfaction, and quality assurance have effects on improving participation rates in vocational competency development training.

• Journal of Agricultural Extension & Community Development
• /
• v.19 no.2
• /
• pp.211-240
• /
• 2012

The purpose of this study was to identify korean agricultural extension workers' Perception of role ambiguity according to restructuring of Agricultural Administrative Systems. The target population of this study was selected from 21 centers out of 156 centers. The subjects for study were 728 agricultural extension officers by the cluster sampling drawn from the sampled 21 agricultural extension centers in four clusters. A survey questionnaire was utilized to measure variables of this study. It consisted of role ambiguity scale and demographic items. In this study, role ambiguity scale was translated from the existing scale. Through a pilot test and final survey, reliability and validity of these scales were examined. The data were collected by mail. A total 420 questionnaires out of 728 from 21 agricultural extension centers were returned. After data cleaning, 410 responses were used for analysis. Both descriptive and inferential statistics were applied for data analysis. Major findings of the study were as follows. There were significant differences of the degree of role ambiguity among the local extension workers divided by four clusters. Especially, the degree of role ambiguity of restructured local administrative system were more higher than other clusters, comparatively. Thus, the factors causing the role ambiguity to agricultural extension officers need to be measured it in-depth.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.133-138
• /
• 2002

As Information society has expanded in large scale. In order to improve the reliability and Qos(Qualify of service), domestic IDC(Internet Data Center) has adopted or will adopt the SLAs(Service Level Agreements). The power quality of internet hosting server unit, power system and UPS is very important for better internet service. Therefore, the higher reliability of power system is imperative for satisfying SLAs. This paper presents the status measurement of domestic IDCs harmonics and illustrates the reduction effect of harmonics through the multi-phase.