• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.56-62
• /
• 2011

In the present study, the phase velocities of guided ultrasonic waves such as the first arriving signal (FAS) and the slow guided wave (SGW) propagating along the long axis on the 12 tubular cortical bone samples in vitro were measured and their correlations with the cortical thickness were investigated. The phase velocities of the FAS and the SGW were measured by using the axial transmission method in air with a pair of unfocused ultrasonic transducers with a diameter of 12.7 mm and a center frequency of 200 kHz. The phase velocity of the FAS measured at 200 kHz exhibited a very high negative correlation with the cortical thickness and that of the SGW arriving after the FAS showed a high positive correlation with the cortical thickness. The simple and multiple linear regression models with the phase velocities of the FAS and the SGW as independent variables and the cortical thickness as a dependent variable revealed that the coefficient of determination of the multiple linear regression model was higher than those of the simple linear regression models. The phase velocities of the FAS and the SGW measured at 200 kHz on the 12 tubular cortical bone samples were, respectively, consistent with those of the S0 and the A0 Lamb modes calculated at 200 kHz on the cortical bone plate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.36-45
• /
• 2010

In this paper, we propose a new design method to design a wireless power transfer system using loop antennas for consumer electronics. This method can simply design a wireless power transfer system only using measurements of coupling coefficients and simple equations of equivalent circuit model about loop antennas without complicated electromagnetic analysis. Using the proposed design method, a wireless power transfer system with a pair of loop antennas operating at the frequency of 13.56 MHz, which have a dimension of $50{\times}50\;cm^2$, is designed and implemented. The input return loss, coupling coefficient, efficiency, and input impedance variation with respect to a distance between loop antennas were measured. The proposed design method provides good agreements between measured and predicted results. Also, the wireless power transfer system with impedance matching circuits designed by the proposed design method shows two times higher efficiency characteristics than the case with the general $50\;{\Omega}$ impedance matching circuits. Therefore, we verified that our design method could be an effective tool to design a wireless power transfer system.

• The Journal of the Korean life insurance medical association
• /
• v.2 no.1
• /
• pp.152-181
• /
• 1985

A statistical analysis on the cardiothoracic ratio in insurance medicine was carried out for 5,200 insured persons who were medically examined including photofluorography of the chest at the Honam medical department, Dong Bang life insurance Company, Ltd from November, 1979 to August, 1984. The results were as follows: 1. The mean value of the cardiothoracic ratio in all of the insured was $44.2{\pm}4.3%$. The mean value of the cardiothoracic ratio was $43.1{\pm}4.1%$ in all males and $45.2{\pm}4.2%$ in all females, and the difference of the values between males and females showed statistical significance(P<0.001). In each age group, the mean value of the cardiothoracic ratios of female was higher than that of male without exception and the difference of the values between males and females showed statistical significance(P<0.001). The mean value of the cardiothoracic ratio showed gradual increase with age from the second to sixth decade in male(P<0.05 or 0.001 after fourth decade) and from the second to seventh decade in female(P<0.05 or 0.001 from the second to sixth decade). 2. Correlation between both sexes and among age groups relating to the cardiothoracic ratios of the insureds seen to be a physiological phenomenon of the cardiac size and should be considered on the rating of the cardiothoracic ratio. Based on the correlation above mentioned and an author's assumption that the incidence of normal and abnormal cardiothoracic ratios in each age group would show the same rate in male and female, author prepared a modified rating table from the existing table; in male group the existing rating table is used and in female group the ratings of 0, 30-50, 50-100 and 100-D are to calculate by the cardiothoracic ratio of 51%or under, 52-56%, 57-61% and 62% or over respectively in the age group below 39, by the cardiothoracic ratio of 52% or under, 53-57%, 58%-62% and 63% or over respectively in the age group of 40-49, by the cardiothoracic ratio of 53% or under, 54-58%, 59-63% and 64% or over respectively in the age group over 60. 3. The relative frequency distribution polygons of the cardiothoracic ratio of both sexes drawn in a pair on one coordinate plane revealed lying in juxtaposition each other horizontally and showed the shifting of females polygon to male's one toward the direction of greater value of the cardiothoracic ratio at a short distance which increased gradually with age. 4. The minimum cardiothoracic ratio was 31.2% and the maximum cardiothoracic ratio was 63.6% in all of the insured. 5. In each age group, no significant sex difference was found in the relative frequency distribution of ratings by the cardiothoracic ratios of 5,200 insureds by using the rating table modified by author, while significant sex difference was found by using the existing rating table.

• KIISE Transactions on Computing Practices
• /
• v.21 no.12
• /
• pp.774-779
• /
• 2015

In this paper, we present the design and implementation of a large-scale qualitative spatial reasoner using Apache Spark, an in-memory high speed cluster computing environment, which is effective for sequencing and iterating component reasoning jobs. The proposed reasoner can not only check the integrity of a large-scale spatial knowledge base representing topological and directional relationships between spatial objects, but also expand the given knowledge base by deriving new facts in highly efficient ways. In general, qualitative reasoning on topological and directional relationships between spatial objects includes a number of composition operations on every possible pair of disjunctive relations. The proposed reasoner enhances computational efficiency by determining the minimal set of disjunctive relations for spatial reasoning and then reducing the size of the composition table to include only that set. Additionally, in order to improve performance, the proposed reasoner is designed to minimize disk I/Os during distributed reasoning jobs, which are performed on a Hadoop cluster system. In experiments with both artificial and real spatial knowledge bases, the proposed Spark-based spatial reasoner showed higher performance than the existing MapReduce-based one.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.177-181
• /
• 2003

Eleven bacterial strains which are able to utilize terephthalic acid as a carbon and an energy source for growth were isolated from the soil of 7 water quality evaluation points in Kyonggi area of Korea. Phthalic acid isomer degrading activity of the isolates from the 4 contaminated points was higher than those from the 3 clean points. Among 11 isolates, 4 isolates which have high terephthalic acid degrading activity and degrade two phthalic acid isomers were identified by partal 16S rDNA sequence determination. One of them was identified as Pseudomonas putida, and the others as Comamonas testosteroni. Thus a large number of phthalic acid isomer degrading bacteria in domestic soil were inferred as C. testosteroni. On the basis of these results, the PCR detection of C. testosteroni in soil was applied to monitor soil contamination by phthalic acid isomers. The DNA of C. test-osteroni extracted from 4 g soil was directly detected by PCR with C. testosteroni specific primer pair. The amount of PCR products was different according to sampling sites and more PCR products were obtained from contaminated sites than those from clean sites (Gulpo-chun＞Anyang-chun＞Hwangguji-chun>Shin-chun＞Huk-chun＞Pukhan-river>Kapyeong-chun). This result was coincided with that of the viable cell counts for terephthalic acid degrading bacteria.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.586-601
• /
• 2001

We propose a mesh based multicast routing protocol referred to as HMMRP for ad-hoc networks. In HMMRP, a limited number of sources are selected as core sources, and the rest of the sources of a multicast group are connected to one of those core sources. The sources and the receivers of a multicast group are also connected through per source trees. In HMMRP, the data delivery mesh of a multicast group are composed of the nodes on these paths, and are reconfigured at regular intervals. Furthermore, each mesh member that lies on the paths between the sources and the core sources as well as be-tween the core sources and the receivers keeps checking if there is a symptom of mesh separation around itself. When a mesh member finds such symptom, it tries to patch itself to the mesh with a local flooding. As a result, the part of the data delivery mesh on those paths are kept connected with a lot higher probability than the rest of the data delivery mesh. That is, for a certain source receiver pair, it is very likely that at least there exists a data delivery path that route from the source to a core source and then to the receiver. Therefore, HMMRP may provide very high data delivery ratio without frequent entire data delivery mesh reconfiguration even when the nodal mobility is high. Simulation results show that HMMRP shows relatively little performance degradation with respect to mobility. Furthermore, the performance degradation with respect to mobility is even smaller when the size of the multicast group becomes larger.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.193-199
• /
• 2017

In the paper, a dual band-notched monopole antenna is proposed for 2.4 GHz WLAN (2.4 ~ 2.484 GHz) and UWB (3.1 ~ 10.6 GHz) applications. The 3.5 GHz WiMAX band notched characteristic is achived by a pair of L-shaped slots instead of the previous U-shaped slot on the center of the radiating patch, whereas the 7.5 GHz band notched characteristic is achived by C-shaped strip resonator placed near to the microstrip feed line. The measured impedance bandwidth (${\mid}S_{11}{\mid}{\leq}-10dB$) is 8.62 GHz (2.38 ~ 11 GHz) which is sufficient to cover 2.4 GHz WLAN and UWB band, while measured band-notched bandwidths for 3.5 GHz WiMAX and 7.5 GHz bnad are 1.13 GHz (3.15 ~ 4.28 GHz) and 800 MHz (7.2 ~ 8 GHz) respectively. In particular, it has been observed that antenna has a good omnidirectional radiation patterns and higher gain of 2.51 ~ 6.81 dBi over the entire frequency band of interest.

• The KIPS Transactions:PartB
• /
• v.9B no.2
• /
• pp.139-146
• /
• 2002

The robot soccer simulation game is a dynamic multi-agent environment. In this paper we suggest a new reinforcement learning approach to each agent's dynamic positioning in such dynamic environment. Reinforcement learning is the machine learning in which an agent learns from indirect, delayed reward an optimal policy to choose sequences of actions that produce the greatest cumulative reward. Therefore the reinforcement learning is different from supervised learning in the sense that there is no presentation of input-output pairs as training examples. Furthermore, model-free reinforcement learning algorithms like Q-learning do not require defining or learning any models of the surrounding environment. Nevertheless these algorithms can learn the optimal policy if the agent can visit every state-action pair infinitely. However, the biggest problem of monolithic reinforcement learning is that its straightforward applications do not successfully scale up to more complex environments due to the intractable large space of states. In order to address this problem, we suggest Adaptive Mediation-based Modular Q-Learning (AMMQL) as an improvement of the existing Modular Q-Learning (MQL). While simple modular Q-learning combines the results from each learning module in a fixed way, AMMQL combines them in a more flexible way by assigning different weight to each module according to its contribution to rewards. Therefore in addition to resolving the problem of large state space effectively, AMMQL can show higher adaptability to environmental changes than pure MQL. In this paper we use the AMMQL algorithn as a learning method for dynamic positioning of the robot soccer agent, and implement a robot soccer agent system called Cogitoniks.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1418-1432
• /
• 1997

Most general content_based image retrieval techniques use color and texture as retrieval indices. In color techniques, color histogram and color pair based color retrieval techniques suffer from a lack of spatial information and text. And This paper describes the design and implementation of content_based image retrieval system using color space and keywords. The preprocessor for image retrieval has used the coordinate system of the existing HSI(Hue, Saturation, Intensity) and preformed to split One image into chromatic region and achromatic region respectively, It is necessary to normalize the size of image for 200*N or N*200 and to convert true colors into 256 color. Two color histograms for background and object are used in order to decide on color selection in the color space. Spatial information is obtained using a maximum entropy discretization. It is possible to choose the class, color, shape, location and size of image by using keyword. An input color is limited by 15 kinds keyword of chromatic and achromatic colors of the Korea Industrial Standards. Image retrieval method is used as the key of retrieval properties in the similarity. The weight values of color space ${\alpha}(%)and\;keyword\;{\beta}(%)$ can be chosen by the user in inputting the query words, controlling the values according to the properties of image_contents. The result of retrieval in the test using extracted feature such as color space and keyword to the query image are lower that those of weight value. In the case of weight value, the average of te measuring parameters shows approximate Precision(0.858), Recall(0.936), RT(1), MT(0). The above results have proved higher retrieval effects than the content_based image retrieval by using color space of keywords.

• Korean journal of applied entomology
• /
• v.37 no.1
• /
• pp.31-37
• /
• 1998

Random amplified polymorphic DNA (RAPD) markers were used to analyze genetic similarity among 8 clones of apierous green peach aphid, two types (M. persicae Sulzer and M. nicotianae lack man) classified by their mo~hologi~cahla raters and host preference (Blackman, 1987), collected from tobacco plants. The genetic variation among these clones was evaluated by polymerase chain reaction amplification with 20 random primers. The higher GC contents of primers, the better in amplification efficiency of PCR reaction in general. The genetic similarities among eight aphid clones were analyzed from UPGMA (unweighted pair group average method) cluster analysis based on simple matching coefficient. The range of genetic similarity coefficients was 0.414 to 0.808. The most close relationship among the clones was similarity coefficient of 0.808 between the PG2 and the PG3 clone. The eight aphid clones analyzed were clustered into three groups by the genetic similarity coefficient. The first group, PG1, PG2, PG3 clone including in M. persicae type by their morphological characters and RED clone in M. nicotianae type was clustered at the genetic similarity coefficient of 0.643. The second group, GR1, GR2, BRN in M. nicotianae type was at the 0.636;and the third group was DBR clone in M. persicae type. The results did not indicate any correlation between m&-phological types (M. persicae and M. nicotianae) and RAPD polymorphism. We could not detect any obvious genetic relationships of the two morphological types of the green peach aphid collected from tobacco plants.