• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.55-64
• /
• 2010

In order to prepare an efficient solution for PM10 reduction in underground stations, the authors measured PM10 concentration levels every 30 minutes in the concourse, platform, and tunnel of Gaehwasan Station of Seoul's subway line 5. Through a correlation analysis of each changing pattern of PM10 concentration, the direction and velocity of diffusion in underground stations were estimated. The PM10 concentration levels were highest in the tunnel, followed by the platform and concourse. PM10 concentrations in the tunnel, platform, and concourse showed a pattern of increasing in the rush hours and decreasing in the non-rush hours. According to the statistical analysis of PM10 concentrations and changing patterns in each location, the higher PM10 concentration in the tunnel expanded to the platform, and some from the platform expanded to the concourse. Therefore, to efficiently reduce PM10 concentrations, it is essential to detect the centralized generation, diffusion factor, expanding route, expanding measure, and other variables and to remove or reduce the diffusion factor and level. Through operating the ventilation system in the right time frame while the PM10 concentration level increases, the power consumption and peak power consumption can be reduced.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.400-406
• /
• 2002

In case of doenjang, solution of browning problem might be an important remedy in order to dissolve consumers' dissatisfaction, therefore this study was performed to develop traditional doenjang which has improved in color aspect for consumers' needs. Physicochemical compositions and color values of commercialized traditional doenjang which was processed by history references of our country, were analyzed. doenjang used as samples were processed with traditional meju, which were made with soybean and mixed with various rates after following process such as soaking, steaming, cooling, chopping and grinding. The doenjang processed were storaged at $30^{\circ}C$ for 27 days, and their amino-N, pH, color values and sensory evaluation were analyzed with fermentation period. Furthermore, nitrogen results analyzed were compared with that of commercialized traditional doenjang. In the comparison with control, treated with only traditional meju, and doenjang treatments processed with different mixing rates of traditional meju and steamed soybean, the content of amino-N in control were higher than the others, and the contents of amino-N decreased with increasing contents of steamed soybean. Their pH were changed weak alkalic region into weak acidic region with fermentation period. In the aspect of color, traditional doenjang having the rate of traditional meju and steamed soybean (1:4) was most improved and also, in comparison of result of sensory evaluation with commercial traditional doenjang, its color, taste and falvor were evaluated predominent, therefore it might be thought to have competition on the market.

• Journal of Biomedical Engineering Research
• /
• v.27 no.5
• /
• pp.203-209
• /
• 2006

The aim of this study is to investigate the feasibility of ex vivo MR diffusion tensor imaging technique in order to observe the diffusion-contrast characteristics of human gastric tissues. On normal and pathologic gastric tissues, which have been fixed in a polycarbonate plastic tube filled with 10% formalin solution, laboratory made 3D diffusion tensor Turbo FLASH pulse sequence was used to obtain high resolution MR images with voxel size of $0.5{\times}0.5{\times}0.5mm^3\;using\;64{\times}32{\times}32mm^3$ field of view in conjunction with an acquisition matrix of $128{\times}64{\times}64$. Diffusion weighted- gradient pulses were employed with b values of 0 and $600s/mm^2$ in 6 orientations. The sequence was implemented on a clinical 3.0-T MRI scanner(Siemens, Erlangen, Germany) with a home-made quadrature-typed birdcage Tx/Rx rf coil for small specimen. Diffusion tensor values in each pixel were calculated using linear algebra and singular value decomposition(SVD) algorithm. Apparent diffusion coefficient(ADC) and fractional anisotropy(FA) map were also obtained from diffusion tensor data to compare pixel intensities between normal and abnormal gastric tissues. The processing software was developed by authors using Visual C++(Microsoft, WA, U.S.A.) and mathematical/statistical library of GNUwin32(Free Software Foundation). This study shows that 3D diffusion tensor Turbo FLASH sequence is useful to resolve fine micro-structures of gastric tissue and both ADC and FA values in normal gastric tissue are higher than those in abnormal tissue. Authors expect that this study also represents another possibility of gastric carcinoma detection by visualizing diffusion characteristics of proton spins in the gastric tissues.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.55-63
• /
• 2020

In order to investigate the separation of Co(II) and Ni(II) by ionic liquids from weak hydrochloric acid solutions, extraction experiments were performed by changing the type and concentration of ionic liquids and the initial pH of the aqueous phase. Two kinds of ionic liquids based on Aliquat 336 were employed in this work; one was synthesized by reacting organophosphorus acids(D2EHPA, PC88A, Cyanex 272, Cyanex 301) with Aliquat 336 and the other was prepared by exchanging the chloride ion of Aliquat 336 with SCN^-. The three types of ionic liquids (ALi-D2, ALi-PC, and ALi-CY272) showed better extraction of Co(II) than Ni(II), and the equilibrium pH was higher than the initial pH. In the case of ALi-CY301, the selectivity of Co(II) and Ni(II) depended on the extraction conditions. In addition, the effect of the addition of TBP to the ionic liquid on the extraction of two metals was also investigated. Employment of ALi-SCN as an extractant resulted in selective extraction of Co(II) and complete separation of the two metal ions was possible.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.848-853
• /
• 2001

This research was conducted to study the effects on antigenicities (allergenicity) and structural changes of gamma-irradiated hen’s egg albumin (ovalbumin, OVA) by heating. Three groups of OVA solution (2.0 mg/mL) were prepared; 1) heat treatment; 2) irradiation after heating; 3) heating after irradiation. Samples were isothermally heated and/or irradiated at the absorption dose of 10 kGy. Competitive indirect ELISA was individually formatted with egg-allergic patients IgE (P-IgE), and mouse murine monoclonal IgG (M-IgG) and rabbit polyclonal IgG (R-IgG) for evaluating bindinhg abilities of antibodies to OVA in the sample solutions. Binding abilities of antibodies to thermally denatured OVA were changed : R-IgG to the sample treated with above 6$0^{\circ}C$, M-IgG to that above 7$0^{\circ}C$, and P-IgE to that above 8$0^{\circ}C$, respectively. P-IgE did not well recognize OVA heated at 8$0^{\circ}C$ and the above. However, binding abilities of M-IgG and R-IgG highly in creased. Significant differences of binding abilities were not observed in all samples with the combination of heat treatment and irradiation, regardless the order of the treatment. Turbidity of samples in creased both by heating and by irradiation, and the increase by irradiation was much higher than by heating. These results showed that allergenicity of OVA reduced by gamma irradiation was not affected by heating.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.49-53
• /
• 2010

Surface plasmon resonance (SPR) which is utilized in thin film refractometry-based sensors has been concerned on measurement of physical, chemical and biological quantities because of its high sensitivity and label-free feature. In this paper, an application of SPR to detection of alcohol content in wine and liquor was investigated. The result showed that SPR sensor had high potential to evaluate alcohol content. Nevertheless, food industry may need SPR sensor with higher sensitivity. Herein, we introduced a nano-technique into fabrication of SPR chip to enhance SPR sensitivity. Using Langmuir-Blodgett (LB) method, gold film with nano-structured surface was devised. In order to make a new SPR chip, firstly, a single layer of nano-scaled silica particles adhered to plain surface of gold film. Thereafter, gold was deposited on the template by an e-beam evaporator. Finally, the nano-structured surface with basin-like shape was obtained after removing the silica particles by sonication. In this study, two types of silica particles, or 130 nm and 300 nm, were used as template beads and sensitivity of the new SPR chip was tested with ethanol solution, respectively. Applying the new developed SPR sensor to a model food of alcoholic beverage, the sensitivity showed improvement of 95% over the conventional one.

• Korean Journal of Remote Sensing
• /
• v.14 no.2
• /
• pp.117-128
• /
• 1998

Topex/Poseidon satellite, launched in Auguest 1992, has provided more 5 years of very good quality data. Efficient improvements, either about instrumental accuracy or about sea level data correction, have been made so that Topex/Poseidon has become presently a wonderful tool for many researchers. The first mission data of 73 cycles, September 1992 - August 1994, was used to our study in order to know characteristics of environmental correction factors in the Amsterdam-Crozet-Kerguelen region of the South Indian Ocean. According to standard procedures as defined under user handbook for sea surface height data processes, then we have chosen cycles 43 as the cycle of reference because this cycle has provided the completed data for measurement points and has presented the exacted position of ground track compared to another cycles. It was computed variations of various factors for correction in ascending ground track 103(Amsterdam-Kerguelen continental plateau) and descending ground track170 (Crozet basin). Here the variations of ionosphere, dry troposphere, humid troposphere, electromagnetic bias, elastic tide and loading tide were generally very smaller as a few of cm, but the variations of oceanic tide(30-35cm) and inverted barometer(15-30cm) were higher than another factors. For the correction of ocean tide, our model(CEFMO: Code d' Elements Finis pour la Maree Oceanique) - This is hydrodynamic model that is very well applicated in all oceanic situations - was used because this model has especially good solution in the coastal and island area as the open sea area. Conclusionally, it should be understood that the variation of ocean free surface is mainly under the influence of tides(>80-90%) in the Amsterdam - Crozet- Kerguelen region of the South Indian Ocean.

• Clean Technology
• /
• v.25 no.3
• /
• pp.206-222
• /
• 2019

Recently, various multiphase flows have been developed, and among them some models have been commercialized. However, most of them have been developed based on a pressure-based approach; therefore, various numerical difficulties were involved inherently. Accordingly, in order to overcome these numerical difficulties, a multiphase flow model, MultiPhaSe flow (MPS), following a fractional-flow based approach was developed. In this study, by combining a contaminant transport module describing an enhanced dissolution effect of a surfactant with MPS, a MultiPhaSe flow and TranSport (MPSTS) model was developed. The developed model was verified using the analytical solution of Clement. The MPSTS model can simulate the process of surfactant enhanced aquifer remediation including interphase mass transfer and contaminant transport in multiphase flow by using the coupled particle tracking method and Lagrangian-Eulerian method. In this study, a surfactant was used in a non aqueous phase liquid (NAPL) contaminated area, and the effect of hydro-geological heterogeneity in the layered media on remediation efficiency was studied using the developed model. According to the numerical simulation, when hydraulic conductivity in a lower layer is 10 times, 20 times, and 50 times larger than that in an upper layer, the concentration of dissolved diesel in the lower layer is much higher than that in the upper layer because the surfactant moves faster along the lower layer owing to preferential flow; thus, the surfactant enhances dissolution of residual non aqueous phase liquid in the lower layer.

• The Journal of the Korean dental association
• /
• v.57 no.10
• /
• pp.560-568
• /
• 2019

Purpose: This study evaluated the antibacterial effects of curcuma, ginger, and finger root extracts in water-soluble powder on planktonic Streptococcus mutans(S.mutans), which is known to cause dental caries, in order to confirm whether these extracts could perform as photosensitizers for the effects of photodynamic therapy (PDT). Methods: This study used the strain of streptococcus mutans ATCC 25175 distributed by the Korean Collection for Type Cultures of the Korea Research Institute of Bioscience & Biotechnology. Commercial edible curcuma, ginger and finger root were used as the natural extracts for the use of photosensitizer. To extract organic solvent, 3 g of each powder was mixed in $30m{\ell}$ of dimethyl sulfoxide (DMSO, VWR, Germany) before extraction. $1.8m{\ell}$ of the photosensitizer solution, manufactured in the concentrations of 5, 0.5, and $0.05mg/m{\ell}$, was mixed with $0.2m{\ell}$ of the S. mutans culture medium that had been cultured for 2 days. To induce the photodynamic reaction, Qraycam (AIOBIO, Seoul, Korea) equipped with 405 nm LED was used to expose light for 5 minutes to irradiate 59 nW energy for 300 seconds. Results: Compared with the case with no light, a higher photodynamic therapeutic effect was confirmed with $0.05mg/m{\ell}$ curcuma powder extract, the concentration of $0.5mg/m{\ell}$ and LED light of 405 nm wavelength (p=0.000, p=0.003). $0.05mg/m{\ell}$ of curcuma powder extract and the concentration of $0.5mg/m{\ell}$ showed 100% antibacterial effect when exposed to light, whereas the concentration of $5mg/m{\ell}$ showed 11.95% antibacterial effect. When exposed to light, $0.05mg/m{\ell}$ of ginger powder extract showed an antibacterial effect which didn't statistically decrease. The concentrations of $0.5mg/m{\ell}$ and $5mg/m{\ell}$ did not show any antibacterial effects. As a result of examining any photodynamic therapeutic effects of finger root powder extract on S. mutans, no statistically significant effect was found. Conclusion: The curcuma powder extract is expected to perform as a photosensitizer. Even though belonging to the same ginger family, ginger powder and finger root powder seem difficult to perform as photosensitizer.

• Korean Journal of Metals and Materials
• /
• v.47 no.2
• /
• pp.129-137
• /
• 2009

Corrosion behaviors of TiN coated dental casting alloys have been researched by using various electrochemical methods. Three casting alloys (Alloy 1: 63Co-27Cr-5.5Mo, Alloy 2: 63Ni-16Cr-5Mo, Alloy 3: 63Co-30Cr-5Mo) were prepared for fabricating partial denture frameworks with various casting methods; centrifugal casting(CF), high frequency induction casting(HFI) and vacuum pressure casting(VP). The specimens were coated with TiN film by RF-magnetron sputtering method. The corrosion behaviors were investigated using potentiostat (EG&G Co, 263A. USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The corrosion morphologies were analyzed using FE-SEM and EDX. Alloy 1 and Alloy 2 showed the ${\alpha}-Co$ and ${\varepsilon}-Co$ phase on the matrix, and it was disappeared in case of TiN coated Alloy 1 and 2. In the Alloy 3, $Ni_2Cr$ second phases were appeared at matrix. Corrosion potentials of TiN coated alloy were higher than that of non-coated alloy, but current density at passive region of TiN coated alloy was lower than that of non-coated alloy. Pitting corrosion resistances were increased in the order of centrifugal casting, high frequency induction casting and vacuum pressure casting method from cyclic potentiodynamic polarization test.