• Korean Management Science Review
• /
• v.10 no.2
• /
• pp.187-212
• /
• 1993

The purpose of this study is to deal with a forecast of probable failures facing up to the existing Korean universities and colleges in the early 21st century and with how each institution should cope with the situation before the failures actually take place. The methods used in this research are Scenario analysis, Factor and Cluster analyses in order to find out major factors having influence upon the operation and management of these universities and colleges. It's turned out that every institution is different from others and in fact unique in its make-up and so each will have different ways to deal with the impending failures and the crisis management problems strategically.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.51
• /
• pp.417-439
• /
• 2011

In order to improve e-Trade service, this paper has deduced impeding factors after review of precedent research on e-Trade and analysis of e-Trade current status. Then an empirical analysis of whether variables deduced are detrimental factors to utilization of e-Trade service has been made on the basis of a research model and relevant hypotheses. The scope of e-Trade service indicated in this paper is limited to use of uTradeHub system. Analytical results for the improvement of e-Trade service clearly indicate that the higher the impeding factor to utilization of the system integration, logistics and customs clearance, marketing and users field, the more necessary the service improvement for invigoration of e-Trade service. However, foreign exchange field does not seem to require attention because SMEs have not active will to do electronic payment through the process of electronic documents.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.6
• /
• pp.633-648
• /
• 2010

The study was performed to elucidate the characteristics of VOCs at distinct monitoring sites in urban atmosphere; one is at a roadside in downtown inland city of Jeonju, and the other is at an industrial site in Gunsan near coastal area. The ambient samples were collected for 24 hours in two-bed adsorbent tubes by using MTS-32 sequential tube sampler equipped with Flex air pump every 16 days in a roadside and a industrial complex from February to November in 2009. VOCs were determined by thermal desorption coupled with GC/MSD. Major individual VOCs in roadside samples were shown as following order in magnitude: toluene>m,p-xylene>ethyl benzene>decanal; and those in the industrial complex samples were as follows: toluene>ethanol>ethyl acetate>decanal>m,pxylene. High benzene concentration in the roadside was more frequently occurred than in the industrial complex. However ambient level of toluene in the industrial complex was higher than that in the road side. Results from roadside sample analysis showed that nonane and 1,2,4-trimethylbenzene were very frequently observed with higher concentrations than those in the industrial complex. It seems that nonane and 1,2,4-trimethylbenzene could be the source characteristics for the roadside air. From the diurnal variation, it was found that concentrations of benzene, ethylbenzene, xylene, nonane and 1,2,4-trimethylbenznene in the roadside were higher during rush hours; but those in the industrial complex were higher from 10 to 16 LST when the industrial activities were animated. On weekly base, the concentration of benzene, toluene, ethylbenzene and m,p-xylene in the roadside were higher specifically on Wednesday, but those in the industrial complex were higher on Sunday. It was found that the general trends of VOCs levels at both sites significantly influence on seasonal changes. The results of factor analysis showed that the VOCs in the roadside were mainly affected by the emission of vehicles and the evaporation of diesel fuel, meanwhile those in the industrial complex were influenced by the evaporation of solvents and vehicular emission.

• Korean Journal of Human Ecology
• /
• v.18 no.6
• /
• pp.1303-1314
• /
• 2009

The purpose of this study lies in examining the characteristics of differentiated body types for plus-size women and obtaining basic data for the wide-ranging choices of ready-made clothing in a consumer's place. The results of this study displayed no significant differences for subjects in their 30s and 40s in comparison to standards by ages but showed a significant difference with subjects in their 50s when compared with the data from Size Korea (2004). Research data in the height and length categories were lower, and the majority of data from the other categories were higher. In order to analyze the characteristics of a plus-size woman's body, 4 factors were differentiated into 3 types with 17 categories: Factor 1 was the element of the thickness of the trunk, factor 2 was the element of the thickness of the lower body and legs, factor 3 was the element of shoulder size and factor 4 was the element of the upper body length. The accumulation rate was shown to be 74.47%. The characteristics for each type were as follows: Type 1 is a body type with a relatively thin waist, small width and girth of upper body and curvy lower body, type 2 is the average body type, and type 3 is a body type with big breasts and abdominal obesity. The standard body type belonged to type 2. According to the correspondency test between age and type, the characteristics of type 1 corresponded relatively close to the measures of subjects in their 40s and relatively far from subjects in their 30s to 50s while type 2 and type 3 appeared to be similar to subjects in their 50s.

• The Korean Journal of Health Service Management
• /
• v.5 no.4
• /
• pp.95-111
• /
• 2011

The purpose of this study was to explore and analyse the work value of university students majoring in health care management. The subjects of this study were 300 students. Maryland Work Value Inventory was used and the data were collected using a structured and self-administrated questionnaire. As a result of factor analysis, the following results were obtained. First, the work value consists of six factors (financial remuneration, social status, social contribution, capability, achievement, proper pride) and it can be classified extrinsic work value (financial remuneration, social status) and intrinsic work value(social contribution, capability, achievement, proper pride). Second, The mean extrinsic work value(4.16) was higher than the mean intrinsic work value(3.80). The preference order of the work value was like this; financial remuneration(4.36) the first, achievement(4.05), social status(3.96), proper pride(3.93), capability(3.78), and social contribution(3.45) the last. Third, the mean of the economic stability in extrinsic work value was the highest. The factors meaningfully relating with intrinsic work value were age, school grade and the experience of job. Forth, as a result of regression analysis, the more school grade they have, the less extrinsic work value and the less their mother's level of education, the higher extrinsic work value.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.439-453
• /
• 2020

The purpose of this study is to investigate the impacts of business service quality on satisfaction, commitment, performance, and loyalty in higher education. A survey was given to undergraduates involved in business through employment and start-up companies at a private university in Korea. With 252 respondents, this study used exploratory factor analysis and reliability analysis to verify the reliability and validity of measured variables. Multiple regression was employed as a statistical method for the hypotheses of the study. The research questions were: 1) How do education SERVQUAL factors (tangibles, responsiveness, reliability, assurance, and empathy) affect customer satisfaction? 2) How do education SERVQUAL factors affect customer commitment? 3) How does customer satisfaction or commitment affect education performance? 4) How does customer satisfaction, commitment or performance affect their loyalty in higher education? The findings show that most dimensions of business service quality have effects on satisfaction and commitment, and satisfaction and commitment have a positive effect on performance. Additionally, satisfaction, commitment and performance all have an effect on loyalty. This study confirmed the need for the improvement of business service quality in a private university. Additionally, it highlighted the importance of user satisfaction, commitment and performance in order to increase the loyalty level of undergraduate students.

• Steel and Composite Structures
• /
• v.34 no.2
• /
• pp.241-260
• /
• 2020

This article presented a comprehensive model to study static buckling stability and associated mode-shapes of higher shear deformation theories of sandwich laminated composite beam under the compression of varying axial load function. Four higher order shear deformation beam theories are considered in formulation and analysis. So, the model can consider the influence of both thick and thin beams without needing to shear correction factor. The compression force can be described through axial direction by uniform constant, linear and parabolic distribution functions. The Hamilton's principle is exploited to derive equilibrium governing equations of unified sandwich laminated beams. The governing equilibrium differential equations are transformed to algebraic system of equations by using numerical differential quadrature method (DQM). The system of equations is solved as an eigenvalue problem to get critical buckling loads and their corresponding mode-shapes. The stability of DQM in determining of buckling loads of sandwich structure is performed. The validation studies are achieved and the obtained results are matched with those. Parametric studies are presented to figure out effects of in-plane load type, sandwich thickness, fiber orientation and boundary conditions on buckling loads and mode-shapes. The present model is important in designing process of aircraft, naval structural components, and naval structural when non-uniform in-plane compressive loading is dominated.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.65-74
• /
• 2018

This study aimed to analyze convergently the result of the health check-up of the military workers at age of 40, a life transition period in Korea. Data of 4898 military workers who took a health check-up in 2015 was obtained from the national health insurance service and we conducted secondary analysis. As a results, the metabolic syndrome group had a greater current smoking rate, higher number of cigarettes smoked per day, longer period of smoking and higher amount of alcohol consumed. Also, the group scored higher on BMI and had a higher level of total cholesterol, AST, ALT and GGT. In conclusion, as the military workers at age of 40 usually perform important duties, effective programs of reducing smoking and drinking alcohol are needed for their age group, In order to develop health management programs, prior investigation to take into consideration specific age and military rank is necessary.

• Journal of the Korean Society of Safety
• /
• v.33 no.2
• /
• pp.52-60
• /
• 2018

This study compares the differences of the fit factor by the order of wearing preference between Particulate filtering facepiece respirators(PFFR) and glasses when participants wore simultaneously and a survey of physical and visual complaint. Recognition level about fit of respirators was investigated and the educational (before- and after-) effect of the fit factor. When participants wore PFFR and glasses, physical complaints were nose pressure, slipping, nose and ear pressure, ear pressure and rim loosen, the most highly physical complaints were nose pressure. Visual complaints were demister, blurry vision, dizziness, visual field, and lens dirty, the most highly visual complaints were demister. But, there was significant difference in physical complaint such as nose pressure(10.3%), slipping (23.0%), nose and ear pressure(14.3%), and rim loosen(16.2%), visual complaint such as visual field(13.8%) and lens dirty(32.4%). For the recognition of fit of respirators, respirators fitness, leak site, an initial point and an object, faulty factor, recognition level was higher. Fit factor was increased after education of proper wearing of respirator. Change of the fit factor was smaller compared to the normal breathing and after 6 actions in case of after education. Questionnaire consisted of general characteristics and physical/visual complaint, recognition of fit. Complaints were measured after the QNFT with multiple choices. Quantitative fit factor was measured by device and compared the result of (before- and after-) educational effect. Also, we selected to 6 actions (Normal breathing, Deep breathing, Bending over, Turning head side to side, Moving head up and down, Normal breathing) among 8 actions OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The fit factor was higher after the training (p=0.000). Descriptive statistics, paired t-test, and Wilcoxon analysis were performed to describe the result of questionnaire and fit test. (P=0.05) Therefore, it is necessary to investigate the quantitative research such as training program and glasses fitting factor about the wearing of PFFR and glasses simultaneously.

• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.6.1-6.10
• /
• 2016

Objectives This study examined the spatial distribution and the extent of soil contamination by heavy metals resulting from primitive, unconventional informal electronic waste recycling in the Agbogbloshie e-waste processing site (AEPS) in Ghana. Methods A total of 132 samples were collected at 100 m intervals, with a handheld global position system used in taking the location data of the soil sample points. Observing all procedural and quality assurance measures, the samples were analyzed for barium (Ba), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), mercury (Hg), nickel (Ni), lead (Pb), and zinc (Zn), using X-ray fluorescence. Using environmental risk indices of contamination factor and degree of contamination ($C_{deg}$), we analyzed the individual contribution of each heavy metal contamination and the overall $C_{deg}$. We further used geostatistical techniques of spatial autocorrelation and variability to examine spatial distribution and extent of heavy metal contamination. Results Results from soil analysis showed that heavy metal concentrations were significantly higher than the Canadian Environmental Protection Agency and Dutch environmental standards. In an increasing order, Pb>Cd>Hg>Cu>Zn>Cr>Co>Ba>Ni contributed significantly to the overall $C_{deg}$. Contamination was highest in the main working areas of burning and dismantling sites, indicating the influence of recycling activities. Geostatistical analysis also revealed that heavy metal contamination spreads beyond the main working areas to residential, recreational, farming, and commercial areas. Conclusions Our results show that the studied heavy metals are ubiquitous within AEPS and the significantly high concentration of these metals reflect the contamination factor and $C_{deg}$, indicating soil contamination in AEPS with the nine heavy metals studied.