• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3068-3078
• /
• 2015

Although the massive MIMO system supports a high throughput, it requires a lot of channel information for channel compensation. For the reduction of overhead, the massive MIMO system generally uses TDD as duplexing scheme. Therefore, the massive MIMO system is sensitive to rapidly changing fast fading in according to time. For the improvement of reduced SINR by fast fading, the adaptive power control is proposed. Unlike the conventional scheme, the proposed scheme considers mobility of device for adaptive power control. The simulation of the proposed scheme is performed with consideration for mobility of device. The result of the simulation shows that the proposed scheme improves SINR. Since SINR is decreased in according to the number of device in the network by unit of cell, each base station can accommodate more devices by the proposed scheme. Also, because the massive MIMO system with high SINR can use high order modulation scheme, it can support higher throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.34-43
• /
• 2007

In the IEEE 802.15.3 Medium Access Control (MAC) protocol, Simultaneously Operating Piconets (SOPs) are linked by the parent/child (P/C) or parent/neighbor (P/N) configuration, which work on a Time Division Multiple Access (TDMA) basis. This provides interference mitigation but the overall throughput is limited because the SOPs share the channel time exclusively. The protocol is not efficient for SOPs if we focus on the combination of interference mitigation and high throughput maintenance. In this paper Public Channel Time Allocation (Public CTA) is proposed, which is able to greatly reduce the inter-piconet interference (IPI) and achieve greater throughput without much loss of link success probability (LSP) in the SOPs. The simulation results based on the SOPs of Direct Sequence Ultra Wideband (DS-UWB) system demonstrate that the proposed scheme effectively supports the coexistence of SOPs, and it can not only significantly improve the overall throughput of SOPs but also maintain high LSP.

• Journal of Multimedia Information System
• /
• v.5 no.4
• /
• pp.273-276
• /
• 2018

In video compression standards, the entropy coding is essential to the high performance compression because redundancy of data symbols is removed. Binary arithmetic coding is one of high performance entropy coding methods. However, the dependency between consecutive binary symbols prevents improving the throughput. For the throughput enhancement, a new probability model is proposed for encoding multi-symbols at one time. In the proposed method, multi-symbol encoder is implemented with only adders and shifters, and the multiplication table for interval subdivision of binary arithmetic coding is removed. Compared to the compression ratio of CABAC of H.264/AVC, the performance degradation on average is only 1.4% which is negligible.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.8-12
• /
• 2008

In this paper, we proposes a D-STTD(Double-Space Time Transmit Diversity) communication system with AMC scheme and analyzes its performance using simulation experiments. The AMC scheme selects an optimal channel coding rate and modulation scheme based on the channel response data for signal transmission, creating a balance between error rate and throughput to improve the overall system throughput and transmission quality. The D-STTD scheme complements the conventional STTD(Space Time Transmit Diversity) scheme, yielding about twice the throughput. The simulation results show that the probability of selecting a high MCS(Modulation and Coding Scheme) level increased as the SNR(Signal to Noise Ratio) improved. Furthermore, the D-STTD communication system with AMC scheme provided a more uniform throughput distribution throughout the entire SNR range compared to its counterpart which did not apply AMC scheme. Also, the maximum throughput of the D-STTD communication system with AMC scheme was twice that of a conventional AMC communication system or a STTD communication system with AMC scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1342-1359
• /
• 2021

The data deduplication technique identifies the duplicates and minimizes the redundant storage data in the backup server. The chunk level deduplication plays a significant role in detecting the appropriate chunk boundaries, which solves the challenges such as minimum throughput and maximum chunk size variance in the data stream. To provide the solution, we propose a new chunking algorithm called Dynamic Prime Chunking (DPC). The main goal of DPC is to dynamically change the window size within the prime value based on the minimum and maximum chunk size. According to the result, DPC provides high throughput and avoid significant chunk variance in the deduplication system. The implementation and experimental evaluation have been performed on the multimedia and operating system datasets. DPC has been compared with existing algorithms such as Rabin, TTTD, MAXP, and AE. Chunk Count, Chunking time, throughput, processing time, Bytes Saved per Second (BSPS) and Deduplication Elimination Ratio (DER) are the performance metrics analyzed in our work. Based on the analysis of the results, it is found that throughput and BSPS have improved. Firstly, DPC quantitatively improves throughput performance by more than 21% than AE. Secondly, BSPS increases a maximum of 11% than the existing AE algorithm. Due to the above reason, our algorithm minimizes the total processing time and achieves higher deduplication efficiency compared with the existing Content Defined Chunking (CDC) algorithms.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1052-1063
• /
• 2016

We propose a millimeter wave (MMW)-based mobile hotspot network (MHN) system for application in high-speed railways that is capable of supporting a peak backhaul link throughput of 1 Gbps per train at 400 km/h. The MHN system can be implemented in subways and high-speed trains to support passengers with smart devices and provide access to the Internet. The proposed system can overcome the inherent high path loss in MMW through system designs and high antenna gains. We present a simulation of the system performance that shows that a fixed beamforming strategy can provide high signal-to-interference-plus-noise-ratio similar to those of an adaptive beamforming strategy, with the exception of 15% of the train path in which the network can use link adaptation with low-order modulation formats or trigger a handover to maintain the connection. We also demonstrate the feasibility of the MHN system using a test bed deployed in Seoul subway line 8. The backhaul link throughput varies instantaneously between 200 Mbps and 500 Mbps depending on the SNR variations while the train is running. During the field trial, the smartphones used could make connections through offloading.

• The Journal of the Korea Contents Association
• /
• v.9 no.7
• /
• pp.67-75
• /
• 2009

IEEE 802.11 WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Study trends of IEEE 802.11n for high throughput show two aspects, enhanced system throughput using aggregation among packets in MAC(Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PRY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PRY connection. This paper adapts A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer and MIMO in PRY layer for IEEE 802.11n system. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use NS-2(Network Simulator-2) considering MAC and PRY connection for reality.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1008-1012
• /
• 2020

In order to make reasonable design for the improvement of comprehensive mechanical properties of RAFM steels, the design system with both machine learning and high-throughput optimization algorithm was established. As the basis of the design system, a dataset of RAFM steels was compiled from previous literatures. Then, feature engineering guided random forests regressors were trained by the dataset and NSGA II algorithm were used for the selection of the optimal solutions from the large-scale solution set with nine composition features and two treatment processing features. The selected optimal solutions by this design system showed prospective mechanical properties, which was also consistent with the physical metallurgy theory. This efficiency design mode could give the enlightenment for the design of other metal structural materials with the requirement of multi-properties.

• Journal of Life Science
• /
• v.18 no.9
• /
• pp.1312-1315
• /
• 2008

High throughput-drug screening plays a pivotal role for early stage of drug discovery process. In the course of assay development for screening of cell death-inducing agents, a protocol that is simple, time-saving, and high throughput-compatible was designed which was confirmed that the protocol can be worked by a HTS-compatible machine. In 96-well format, PC-3 cancer cells (1${\times}10^{4}$ cells/ml) were cultured for 24 hr. After 24 h-incubation with various medicinal plants extracts, the cells were then stained with DAPI for 30 min. The fluorescence intensity of the stained cells was measured semi-automatically with a multilabel counter. To test whether the present assay system effectively works, we screened about 850 medicinal plant extracts, and selected 1 positive crude extracts that contained cell death-inducing activity. These results suggest that the protocol is highly amenable to HTS implementation for a cell death-inducing agent(s).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.12
• /
• pp.3237-3256
• /
• 2012

In the context of effective usage of a scarce spectrum resource, emerging wireless communication standards will demand spectrum sharing with existing systems as well as multiple access with higher spectral efficiency. We mathematically analyze the sum throughput of a spectrum sharing space-division multiple access (SDMA) system, which forms a transmit null in the direction of other coexisting systems while satisfying orthogonal beamforming constraints. For a large number of users N, the SDMA throughput scales as log N at high signal-to-noise ratio (SNR) ((J-1) loglog N at normal SNR), where J is the number of transmit antennas. This indicates that multiplexing gain of the spectrum sharing SDMA is $\frac{J-1}{J}$ times less than that of the non-spectrum sharing SDMA only using orthogonal beamforming, whereas no loss in multiuser diversity gain. Although the spectrum sharing SDMA always has lower throughput compared to the non-spectrum sharing SDMA in the non-coexistence scenario, it offers an intriguing opportunity to reuse spectrum already allocated to other coexisting systems.