• 전자공학회논문지A
• /
• 제29A권8호
• /
• pp.89-98
• /
• 1992

IIM(Implantation Into Metal) process usning Co silicides has been investigated to obtain ultra-shallow junctions less than 0.1$\mu$m. Rapid Thermal Annealing using halogen lamps was employed to form CoSi$_2$ and junctions simultaneously.. Resistivities of CoSi$_2$ were 13-17$\mu$ $\Omega$-cm. CoSi$_2$/p$^{+}$/Si and CoSi$_2$/n$^{+}$/Si junction were formed by diffusion of B and As, respectively, from Co film. It was found out that B and As were severely lost by the evaporation during high temperature annealing Therefore SiO$_2$ capping layers were introduced to prevent the evaporation of the implanted dopants from the films. Investigation of the behavior of dopants with respect to annealing time revealed that increasing the annealing time enhanced the diffusion of dopants into Si from CoSi$_2$.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권2호
• /
• pp.50-54
• /
• 2000

We studied the synthesis of S $i_{1-x}$ Cx (x=0.016) epitaxial layer using ion implantation and solid phase epitaxy (SPE). The activation energy Ea was obtained for the loss of substitutional carbon using fourier transform-infrared spectroscopy (FTIR) and high-resolution x-ray diffraction (HR-XRD). In FTIR analysis, the integrated peak intensity was used to quantify the loss of carbon atoms from substitutional to interstitial sites during annealing. The substitutional carbon contents in S $i_{0.984}$ $C_{0.016}$ were also measured using HR-XRD. By dynamic simulations of x-ray rocking curves, the fraction of substitutional carbon was obtained. The effects of annealing temperature and time were also studied by comparing vacuum furnace annealing with rapid thermal annealing (RTA))))))

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 추계학술발표강연 및 논문개요집
• /
• pp.76-76
• /
• 1999

Low resistance ohmic contacts to the Si-doped InGaN(~$\times$10$^{19}$ ㎤) were obtained using the W metallization schemes. Specific contact resistance decreased with increasing annealing temperature. The lowest resistance is obtained after a nitrogen ambient annealing at 95$0^{\circ}C$ for 90s, which results in a specific contact resistance of 2.75$\times$10$^{-8}$ Ω$\textrm{cm}^2$. Interfacial reactions and surface are analyzed using x-ray diffraction, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The X-ray diffraction results show that the reactions between the W film and the InGaN produce a $\beta$-W$_2$N phase at the interface. TEM results also show that the $\beta$-W$_2$N has a rough interface, which increase contact area. It shows that the morphology of the contacts is stable up to a temperature as high as 95$0^{\circ}C$. Possible mechanisms are proposed to describe the annealing temperature dependence of the specific contact resistance.

• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.687-694
• /
• 2008

This paper is focused on the improvement of MOS device reliability related to deuterium process. The injection of deuterium into the gate oxide film was achieved through two kind of method, high-pressure annealing and low-energy implantation at the back-end of line, for the purpose of the passivation of dangling bonds at $SiO_2/Si$ interface. Experimental results are presented for the degradation of 3-nm-thick gate oxide ($SiO_2$) under both negative-bias temperature instability (NBTI) and hot-carrier injection (HCI) stresses using P and NMOSFETs. Annealing process was rather difficult to control the concentration of deuterium. Because when the concentration of deuterium is redundant in gate oxide excess traps are generated and degrades the performance, we found annealing process did not show the improved characteristics in device reliability, compared to conventional process. However, deuterium ion implantation at the back-end process was effective method for the fabrication of the deuterated gate oxide. Device parameter variations under the electrical stresses depend on the deuterium concentration and are improved by low-energy deuterium implantation, compared to conventional process. Our result suggests the novel method to incorporate deuterium in the MOS structure for the reliability.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.189.1-189.1
• /
• 2014

Lead zirconium titanate (PZT) is usually used as bulk and thin films. Due to high flexibility and piezoelectric, ferroelectric and pyroelectric properties, PZT fiber has attracted in a variety of fields such as sensor devices, non-electromechanical systems and non-volatile ferroelectric memory devices. And PZT fiber can be numerously synthesized and almost with the diameter of PZT fiber thicker than $10{\mu}m$. However, the electrospinnig method is cost effective and convenient. PZT obtained by electrospinning methodhas the diameter from sub-micro to nanometer. In this paper, the PZT/PVP nanofibers were synthesized with three precursors, lead nitrate, zirconium ethoxide and titanium isopropoxide. And the PZT nanofibers were fabricated after removal of PVP by annealing process at various temperature. The obtained PZT nanofibers were characterized by means of X-ray photoelectron spectroscopy (XPS) for chemical properties, X-ray diffraction (XRD) for crystallinity and phase, scanning electron microscopy (SEM) for morphologies. The diameter of PZT nanofibers were measured with SEM. From the SEM images, we confirmed that diameter of PZT nanofibers was hundreds of nanometers and decreased with increasing the annealing temperature. When the annealing temperature increased, the crystallinity of PZT nanofibers changed from pyrochlore to perovskite structure.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1188-1194
• /
• 2013

Transparent $TiO_2$ thin films have been prepared by sol-gel spin coating method. The sols used for deposition of thin films were prepared with different ethanol content. The effect of ethanol (solvent) concentration and annealing temperature on the performance of $TiO_2$ thin film solar cells has been studied. The results indicate that the as deposited films are amorphous in nature. $TiO_2$ thin films annealed at temperatures above $350^{\circ}C$ exhibited crystalline nature with anatase phase. The results also indicated that the crystallinity of the films improved with increase of annealing temperature. The high resolution transmission electron microscope images showed lattice fringes corresponding to the anatase phase of $TiO_2$. The band gap of the deposited films has been found to decrease with increase in annealing temperature and increase with increase in ethanol concentration. The dependents of photovoltaic efficiency of the dye-sensitized $TiO_2$ thin film solar cells (DSSCs) with the amount of ethanol used to prepare thin films was determined from photocurrent-voltage curves.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.703-706
• /
• 2004

This paper deals with the various sealing conditions in a vacuum and the discharge characteristics. The MgO thin film is prepared by e-beam evaporation method. Sealing process was performed in a vacuum at panel temperature of 430 $^{\circ}C$. We find the cracks on the MgO film surface, which results in higher discharge voltage and lower luminous efficiency. The vacuum in-line sealing technology does not require additional annealing process but induces the MgO cracks because of the high temperature sealing cycle in a vacuum. Therefore we modify the vacuum in-line sealing cycle which the MgO cracks are not found and the good characteristics of plasma displays are found in higher sealing pressure at sealing temperature of 430 $^{\circ}C$.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권4호
• /
• pp.300-305
• /
• 1994

We determined the alloy composition of the liquid-phase epitaxy(LPE) grown $Al_{x}$G $a_{1-x}$ As by the photoreflectance(PR), and observed the variation of PR signal by changing the condition of annealing and thickness of epilayer. As the measuring temperature was decreased, the broadening parameter was decreased, and the amplitude of PR signal was increased. When the temperature of annealing was increased, the surface carrier concentration was decreased and then the shape and amplitude of PR signal were affected by the surface electric field. The structure change was observed when the specimen was annealed for long time at a high temperature. We found that the surface electric field increased when the thickness of epilayer was decreased by etching, because the band bending was increased by the decreased of the width of depletion layer....

• Journal of Korean Vacuum Science & Technology
• /
• 제2권2호
• /
• pp.97-100
• /
• 1998

We have investigated the effects of crystalline activation on solid phase crystallization (SPC) of amorphous silicon (a-Si) thin films. Wet blasting and self ion implantation were employed as the activation treatments to induce macro or micro crystalline damages on deposited a-Si films. Low temperature and larger grain crystallization were obtained by the applied two-step activation. High degree of crystallinity was also observed on both furnace and rapid SPC. crystalline activations showed the promotion of nucleation on the activated regions and the retardation of growth in an amorphous matrix in SPC. The observed behavior of two-step SPC was strongly dependent on the applied activation and annealing processes. It was also found that the diversified effects by macro and micro activations on the SPC were virtually diminished as the annealing temperature increased.

• 한국전기전자재료학회논문지
• /
• 제36권6호
• /
• pp.576-581
• /
• 2023

The Ga₂O₃ thin films were deposited using an RF sputtering system and the effect of crystallographic and optical properties under rapid thermal annealing conditions on Ga₂O₃ thin film was evaluated. A rapid thermal annealing method can fabricate a crystalline Ga₂O₃ thin film which is applied to various fields with a low cost and a high efficiency compared with the conventional post-annealing method. In this study, the Ga₂O₃ treated at 900℃ for 1 min showed the beta and gamma phases in XRD measurement. In optical properties, the crystalline Ga₂O₃ represented a high transmittance of more than 80% in the visible region and was calculated with a high optical bandgap energy of 4.58 eV. The beta and gamma phases Ga₂O₃ can be obtained by adjusting the rapid thermal annealing temperatures, and the various properties such as the optical bandgap energy can be controlled. Moreover, it is expected that crystalline Ga₂O₃ can be applied to various devices by controlling not only temperature but process time.