• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.710-716
• /
• 2003

OFDM is a very attractive technique for achieving high-bit-rate data transmission and high spectrum efficiency. However one of disadvantages of OFDM signal is the high PAPR characteristic when multicarriers are added up coherently. In this paper, we propose an adaptive PTS scheme using two threshold levels for PAPR reduction and reducing the amount of PAPR calculations with clipping scheme. Simulation results show that it is almost same between average bit error rate performance of the proposed scheme and that of a conventional scheme. Also, we obtain a great performance gain in the amount of calculations compared to the conventional scheme. Therefore, proposed system has a good performance in data processing time in OFDM wireless communication systems.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.89-94
• /
• 2006

ODFM(Orthogonal Frequency Division Multiplexing) technique is suitable for high speed data transfer both in wired/wireless channels, and is actively studied recently. Among them, WiBro based on IEEE 802.16 uses ODFM as its core technology, and is currently trying to expand market through commercialization. Therefore, if it's used for high speed moving object(KTX, airplane..etc) in near future, there is a possibility of ICI(inter-carrier interference) to occur due to DFS(Doppler Frequency Shift), a critical weak point of ODFM System. This study suggests 3 compensation techniques for Doppler effects in ODFM system operating through satellite, and confirms improved performance through constellation and BER curve.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8C
• /
• pp.792-802
• /
• 2002

One of the technologies which accelerate data transmission rate on the Internet is ADSL(Asymmetric Digital Subscriber Line), which enables the fast growth of the information age by providing infrastructures for the high speed Internet access. The network architecture of the ADSL service is the FTTC(Fiber To The Curb) which consists of fiber netwoks and copper based subscriber lines. The ADSL is a technology that utilizes the existing subscriber line efficiently. In the FTTC architecture, the major factors that degrade the quality of the ADSL service are the copper wires in the subscriber loops. This paper examines the characteristics of the subscriber lines that affect the high speed Internet access in deploying the ADSL services and also analyzes the mutual relationships between each line characteristic and its performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.371-377
• /
• 2011

Users of the Information Age, IT usage patterns of the wired broadband information services and various forms of the same quality wireless multimedia services are required. Changes of these times the next-generation mobile communications (IMT-Advanced) has emerged as the necessity of developing its current voice and packet data communications on the move in the high-speed 100Mbps, 1Gbps in stationary and slow data transmission rates up to fixed-mobile convergence based on needed to provide ubiquitous service platform for the realization of IMT-Advanced is the time for preparation. In particular, 3-5GHz band, focused on mobile communications can be used to secure the necessary frequency band relocated and the existing crosstalk analysis methodology developed for the services rendered, and the frequency of such results to obtain new spectrum for IMT-Advanced for the country to secure the frequency characteristics and IMT-Advanced 3-5GHz band for the radio frequency of the characterization techniques necessary to develop a national wireless communication interference and frequency-based technology acquisition and management skills were identified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.175-182
• /
• 2000

(A hybrid-type wireless infrared data communication module was fabricated by using the light emitting andabsorption diodes with the one-chip of integrated digital circuits. The light emitting diode with the peak spectrum of 850 nm was made from compound semiconductor material of AIGaAs and shows high speed signal transmission with the delay time of 60 nsec for the light direction angle of 30". The Si PIN photodiode showsthe good absorption rate for the range of wavelength of 450-1050 nm and convex-type epoxy lens was utilized for the spectrum filtering on the visible-range spectrum below 750 nm, The data transmission speed is 115.2 kbps and the fabricated module satisfies on the IrDA 1.0 SIR standard requirements.)ments.)

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.9-14
• /
• 2008

Intentional city bands and public radio frequencies could reduce the internet transmission speed on the wired lines because AM and HF band are overlapping on the xDSL up and down data steam by way of the wired transmission lines. We were designed the adaptive common mode rejection circuit with 2 way amplifier against public radio frequency. Specially our circuits were applied for power and signal lines. We could reduced the common mode rejection up to 30dB and increased the up stream speed around 1.8 times using a our developed equipments. Also it could expanded the transmission distance up to 1.7 times than old lines.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.48-55
• /
• 2009

This paper presents a high-speed Forward Error Correction (FEC) architecture based on three-parallel Reed-Solomon (RS) decoder for next-generation 100-Gb/s optical communication systems. A high-speed three-parallel RS(255,239) decoder has been designed and the derived structure can also be applied to implement the 100-Gb/s RS-FEC architecture. The proposed 100-Gb/s RS-FEC has been implemented with 0.13-${\mu}m$ CMOS standard cell technology in a supply voltage of 1.2V. The implementation results show that 16-Ch. RS-FEC architecture can operate at a clock frequency of 300MHz and has a throughput of 115-Gb/s for 0.13-${\mu}m$ CMOS technology. As a result, the proposed three-parallel RS-FEC architecture has a much higher data processing rate and low hardware complexity compared with the conventional two-parallel, three-parallel and serial RS-FEC architectures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1332-1339
• /
• 2000

This paper presents the architecture and design of a high speed asymmetric data transmission baseband MODEM ASIC chip for CATV networks. The implemented MODEM chip supports the physical layer of the DOCSIS(Data Over Cable Service Interface Specification) standard in MCNS(Multimedia Cable Network System) The chip consists of a QPSK/16-QAM transmitter and a 64/256-QAM receiver which contain a symbol timing recovery circuit, a carrier recovery circuit, a blind equalizer using MMA and LMS algorithms. The chip can support data rates of 64Mbps at 256 QAM and 48Mbps at 64-QAM and can provide symbol rates up to 8MBaud. This symbol rate is faster than existing QAM receivers. We have performed logic synthesis using the $0.35\mu\textrm{m}$ standard cell library. The total number of gates is about 290,000 and the implemented chip is being fabricated and will be delivered soon.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.7
• /
• pp.628-637
• /
• 1990

In this paper we present on architecture for a high sppeed CMOS multiplier which can be used for real-time digital signal processing. And a synthesis method for designing highly parallel algorithms in VLSI is presented. A parallel multiplier design based on the modified Booth's algorithms and Ling's algorthm. This paper addresses the design of multiplier capable of accpting data in 2's complement notation and coefficients in 2's complement notation. Multiplier consists of an interative array of sequential cells, and are well suited to VLSI implementation as a results of their modularity and regularity. Booth's decoders can be fully tested using a relatively small number af test vector.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.198-200
• /
• 1986

In this paper, the optical modem for data link realization is designed with the advantages of optical fiber : large handwidth, no electromagnetic interference, high speed and long-haul communications. Biphase cording format is used for the sync, and async, transmissions. Modem interface conform to the CCITT V.24 standard for the compatibility with existing systems. 0/E and E/0 converters are designed using LED-APD pair for long wave length and LD-APD for short wave length, respectively. As a result, the system is capable of transmitting at any bps within dc to 200Kbps in async, and at 1200bps up to 57.6Kbps in sync. transmission.