• 한국지반신소재학회논문집
• /
• 제23권1호
• /
• pp.27-37
• /
• 2024

본 연구에서는 직접 알고리즘이 적용된 역해석 기법을 이용하여 실제 흙막이 벽체 현장 2개소를 대상으로 역해석을 수행하였으며 이를 유전알고리즘과 비교하여 역해석 기법의 적정성을 평가하였다. 또한, 프로그램의 효과적인 활용방안을 제시하기 위해 역해석 입력값인 계측 데이터를 굴착단계별로 다르게 입력한 후 역해석 결과(변위, 부재력)의 적용성을 검토하였다. 연구 결과, 직접알고리즘과 유전알고리즘 모두 적용성이 높으나 본 프로그램에 대한 최적화는 직접알고리즘이 더 잘 예측되는 것으로 평가되었다. 또한 직접알고리즘이 적용된 역해석 프로그램을 효과적으로 사용하기 위해서는 최종 굴착단계가 8단계~11단계인 현장을 대상으로 7단계 굴착시의 계측데이터를 입력할 경우 비교적 정확한 흙막이 거동을 예측할 수 있는 것으로 평가되었다.

• 대한토목학회논문집
• /
• 제26권2A호
• /
• pp.383-390
• /
• 2006

본 연구에서는 급수전개를 이용한 추계론적 유한요소해석법의 개선을 위한 등가몬테카를로 추계장함수를 제안하고 1차 Taylor전개를 이용한 추계론적 유한요소해석법인 가중적분법에 적용하였다. 일반적으로 1차 Taylor전개를 이용하는 수치해석법에서의 응답변화도는 고려하고 있는 추계장의 분산계수에 대하여 선형거동을 보인다. 그러나 몬테카를로 해석의 경우 추계장 분산계수에 대하여 비선형 거동을 나타낸다. 이는 급수전개법의 1차 Taylor전개에 따른 선형특성에 기인한다. 따라서, 가중적분법에서 사용되는 Taylor전개된 변위벡터와 몬테카를로 해석에서의 변위벡터를 비교하고 이들 두 변위벡터 사이에 상호 불일치 하는 점을 고찰하여 몬테카를로 해석에서의 변위벡터와 등가의 변위벡터를 구성하고 이를 가중적분법에 적용하였다. 제안한 등가몬테카를로 추계장은 본래의 추계장 함수에 대한 고차함수로 주어진다. 평면구조에 대한 수치해석을 통하여 제안한 등가몬테카를로 추계장을 이용한 정식화의 타당성을 고찰하였다 새로운 정식화는 기존의 l차 가중적분법을 위한 정식화 과정과 유사하게 수행할 수 있었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.3-17
• /
• 2003

This paper deals with the problems and their possible solutions in the development of finite element for analysis of shell. Based on these solution schemes, a series of flat shell elements are established which show no signs of membrane locking and other defects even though the coarse meshes are used. In the element formulation, non-conforming displacement modes are extensively used for improvement of element behaviors. A number of numerical tests are performed to prove the validity of the solutions to the problems involved in establishing a series of high performance flat shell elements. The test results reveal among others that the high accuracy and fast convergence characteristics of the elements are obtainable by the use of various non-conforming modes and that the ‘Direct Modification Method’ is a very useful tool for non-conforming elements to pass the patch tests. Furthermore, hierarchical and higher order non-conforming modes are proved to be very efficient not only to make an element insensitive to the mesh distortion but also to remove the membrane locking. Some numerical examples are solved to demonstrate the validity and applicability of the presented elements to practical engineering shell problems.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.221-227
• /
• 2019

One of the important requirements for the application of reduced activation ferritic/martensitic steel is to retain proper mechanical properties in irradiation and high temperature conditions. In order to simulate the impact toughness with the effect of temperature and irradiation, a simulation model based on energy balance method consisted of crack initiation, plastic propagation and cleavage propagation stages was established. The effect of temperature on impact toughness was analyzed by the model and the trend of the simulation results was basicly consistent with the previous experimental results of CLAM steels. The load-displacement curve was simulated to express the low temperature ductile-brittle transition. The effect of grain size and inclusion was analyzed by the model, which was consistent with classical experiment results. The transgranular-intergranular transformation in brittle materials was also simulated.

• 복합신소재구조학회 논문집
• /
• 제1권1호
• /
• pp.1-8
• /
• 2010

The dynamic instability analysis of delaminated composite structures subjected to in-plane pulsating forces is carried out based on the higher order shell theory of Sanders. In the finite element (FE) formulation, the seven degrees of freedom per each node are used with transformations in order to fit the displacement continuity conditions at the delamination region. The boundaries of the instability regions are determined using the method proposed by Bolotin. The numerical results obtained for skew plates and shells are in good agreement with those reported by other investigators. The new results for delaminated skew plate and shell structures in this study mainly show the effect of the interactions between the radius-length ratio and other various parameters, for example, skew angles, delamination size, the fiber angle of layer and location of delamination in the layer direction. The effect of the magnitude of the periodic in-plane load on the instability regions is also investigated.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1352-1358
• /
• 2012

본 연구에서는 층간 분리된 복합소재 구조의 동적 해석을 고차항 이론에 근간하여 수행하였다. 2차원 유한요소 정식화에서 층간분리영역 경계에서의 변위를 일치시키기 위한 변환기법을 적용하였다. 불안정 영역의 경계는 Bolotin의 이론을 적용하여 산정하였다. 경사판에 대한 해석 결과는 기존 문헌 결과와 잘 일치하였다. 복합소재 적층구조에 대한 새로운 해석 결과들은 다양한 기하학적 영향과의 상호거동 관계를 보여준다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.171-171
• /
• 2010

An innovative design of a floating-buoy wave energy converter (WEC) using hydrostatic transmission (HST), named HSTWEC, is presented in this paper. The system is designed to convert ocean wave fluctuation into electricity by using the HST circuit and an electric generator. Based on the floating-buoy concept, the wave forces the sub-buoy to move up and down. Consequently, the electric power can be obtained from the generator in both the moving directions of the sub-buoy through the HST circuit as shown in Fig. 1. In order to investigate the HSTWEC operations, a mathematical model of the system is indispensible. In addition, the method to control the HSTWEC, including: pump displacement control, tension adjustment control and ballast weight control, is also discussed in this paper. Finally, the design concept as well as simulation results indicated that this HSTWEC design is an effective solution and possible to fabricate for wave energy generation.

• 한국터널지하공간학회 논문집
• /
• 제12권5호
• /
• pp.379-387
• /
• 2010

본 논문에서는 고속국도 제 12호선 담양-성산간의 양방향 터널의 설계 시, 지반 물성치의 불확실성을 고려하기 위해 위험도 분석에 근거하여 최적의 지보패턴 및 굴착방법을 결정하는 사례를 소개하였다. 이를 위해 지보량과 굴착방법이 다른 3 가지 적용 안을 선정하고, 터널의 안정성을 정량화할 수 있는 개념인 안전율을 사용하여 각각의 경우에 대해 Monte Carlo simulation 기법을 사용하여 위험도를 구하였다. 이때 결과의 신뢰도를 높이기 위하여 정규분포를 만족하는 총 729가지 경우의 지반물성치 조합 (변형계수, 점착력, 내부마찰각)을 생성하여 사용하였다. 또한 터널의 발생변위 및 숏크리트 휨응력 분포를 비교 분석하여 터널의 안정성을 확인하였다.

• 접착 및 계면
• /
• 제5권2호
• /
• pp.14-26
• /
• 2004

For reliable determination of mechanical characteristics of adhesively bonded joints used e.g. as input data for computer-aided design of complex components, the thick-adherend tensile-shear test according to ISO 11003-2 is the most important material testing method. Although the total displacement of the joint is measured across the polymer layer directly in the overlap zone in order to minimize the influence of the stepped adherends, the substrate deformation must be taken into account within the framework of the evaluation of the shear modulus and the maximum shear strain, at least when high-strength adhesives are applied. In the standard ISO 11003-2 version of 1993, it was prescribed to perform the substrate deformation correction by means of testing a one-piece reference specimen. The authors, however, pointed to the excessive demands on the measuring accuracy of the extensometers connected with this technique in industrial practice and alternatively proposed a numerical deformation analysis of a dummy specimen. This idea of a mathematical correction was included in the revised ISO 11003-2 version of 2001 but in the simplified form of an analytical method based on Hooke's law of elasticity for small strains. In the present work, it is shown that both calculation techniques yield considerably discordant results. As experimental assessment would require high-precision distance determination (e.g. laser extensometer), finite element analyses of the deformation behavior of the bonded joint are performed in order to estimate the accuracy of the obtained substrate deformation corrections. These simulations reveal that the numerical correction technique based on the finite element deformation modeling of the reference specimen leads to considerably more realistic results.

• Structural Engineering and Mechanics
• /
• 제73권4호
• /
• pp.407-426
• /
• 2020

In this present paper, a semi-analytical mesh-free method is employed for the three-dimensional free vibration analysis of a bi-directional functionally graded piezoelectric circular structure. The dependent variables have been expanded by Fourier series with respect to the circumferential direction and have been discretized through radial and axial directions based on the mesh-free shape function. The current approach has a distinct advantage. The nonlinear Green-Lagrange strain is employed as the relationship between strain and displacement fields to observe thermal impacts in stiffness matrices. Nevertheless, high order terms have been neglected at the final steps of equations driving. The material properties are assumed to vary continuously in both radial and axial directions simultaneously in accordance with a power law distribution. The convergence and validation studies are conducted by comparing our proposed solution with available published results to investigate the accuracy and efficiency of our approach. After the validation study, a parametric study is undertaken to investigate the temperature effects, different types of polarization, mechanical and electric boundary conditions and geometry parameters of structures on the natural frequencies of functionally graded piezoelectric circular structures.