Browse > Article
http://dx.doi.org/10.1016/j.net.2018.08.016

Simulation of impact toughness with the effect of temperature and irradiation in steels  

Wang, Chenchong (State Key Laboratory of Rolling and Automation, School of Materials Science and Engineering, Northeastern University)
Wang, Jinliang (State Key Laboratory of Rolling and Automation, School of Materials Science and Engineering, Northeastern University)
Li, Yuhao (High School Attached to Beijing University of Technology)
Zhang, Chi (Key Laboratory of Advanced Materials of Ministry of Education, School of Materials Science and Engineering, Tsinghua University)
Xu, Wei (State Key Laboratory of Rolling and Automation, School of Materials Science and Engineering, Northeastern University)
Publication Information
Nuclear Engineering and Technology / v.51, no.1, 2019 , pp. 221-227 More about this Journal
Abstract
One of the important requirements for the application of reduced activation ferritic/martensitic steel is to retain proper mechanical properties in irradiation and high temperature conditions. In order to simulate the impact toughness with the effect of temperature and irradiation, a simulation model based on energy balance method consisted of crack initiation, plastic propagation and cleavage propagation stages was established. The effect of temperature on impact toughness was analyzed by the model and the trend of the simulation results was basicly consistent with the previous experimental results of CLAM steels. The load-displacement curve was simulated to express the low temperature ductile-brittle transition. The effect of grain size and inclusion was analyzed by the model, which was consistent with classical experiment results. The transgranular-intergranular transformation in brittle materials was also simulated.
Keywords
Impact toughness; Simulation; Energy balance method; Temperature and irradiation;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 T.K. Kim, S. Noh, S.H. Kang, J.J. Park, H.J. Jin, M.K. Lee, J. Jang, C.K. Rhee, Current status and future prospective of advanced radiation resistant oxide dispersion strengthened steel (ARROS) development for nuclear reactor system applications, Nucl. Eng. Technol. 48 (2016) 572-594.   DOI
2 C. Wang, C. Zhang, J. Zhao, Z. Yang, W. Liu, Microstructure evolution and yield strength of CLAM steel in low irradiation condition, Mater. Sci. Eng. A 682 (2017) 563-568.   DOI
3 W. Wang, S. Liu, G. Xu, B. Zhang, Q. Huang, Effect of thermal aging on microstructure and mechanical properties of China low-activation martensitic steel at 550 degrees C, Nucl. Eng. Technol. 48 (2016) 518-524.   DOI
4 S.N. Zhu, C. Zhang, Z.G. Yang, C.C. Wang, Hydrogen's influence on reduced activation ferritic/martensitic steels' elastic properties: density functional theory combined with experiment, Nucl. Eng. Technol. 49 (2017) 1748-1751.   DOI
5 C. Wang, C. Zhang, Z. Yang, J. Zhao, Multiscale simulation of yield strength in reduced-activation ferritic/martensitic steel, Nucl. Eng. Technol. 49 (2017) 569-575.   DOI
6 W. Wang, J. Chen, G. Xu, Effect of thermal aging on grain structural characteristic and Ductile-to-Brittle transition temperature of CLAM steel at $550^{\circ}C$, Fusion Eng. Des. 115 (2017) 74-79.   DOI
7 Y.-Y. Wang, J.-H. Ding, W.-B. Liu, S.-S. Huang, X.-Q. Ke, Y.-Z. Wang, C. Zhang, J.-J. Zhao, Irradiation-induced void evolution in iron: a phase-field approach with atomistic derived parameters, Chin. Phys. B (2017) 26.
8 J. Brnic, G. Turkalj, M. Canadija, S. Krscanski, M. Brcic, D. Lanc, Deformation behaviour and material properties of austenitic heat-resistant steel X15CrNiSi25-20 subjected to high temperatures and creep, Mater. Des. 69 (2015) 219-229.   DOI
9 C.C. Eiselt, H. Schendzielorz, A. Seubert, B. Hary, Y. de Carlan, P. Diano, B. Perrin, D. Cedat, ODS-materials for high temperature applications in advanced nuclear systems, Nucl. Mater. Energy 9 (2016) 22-28.   DOI
10 S.J. Zinkle, J.L. Boutard, D.T. Hoelzer, A. Kimura, R. Lindau, G.R. Odette, M. Rieth, L. Tan, H. Tanigawa, Development of next generation tempered and ODS reduced activation ferritic/martensitic steels for fusion energy applications, Nucl. Fusion 57 (2017).
11 J.-H. Baek, T.S. Byun, S.A. Maloy, M.B. Toloczko, Investigation of temperature dependence of fracture toughness in high-dose HT9 steel using smallspecimen reuse technique, J. Nucl. Mater. 444 (2014) 206-213.   DOI
12 N.A. Giang, M. Kuna, G. Huetter, Influence of carbide particles on crack initiation and propagation with competing ductile-brittle transition in ferritic steel, Theor. Appl. Fract. Mech. 92 (2017) 89-98.   DOI
13 X. Chen, Y. Huang, B. Madigan, J. Zhou, An overview of the welding technologies of CLAM steels for fusion application, Fusion Eng. Des. 87 (2012) 1639-1646.   DOI
14 Q. Huang, Development status of CLAM steel for fusion application, J. Nucl. Mater. 455 (2014) 649-654.   DOI
15 M.G. Park, C.H. Lee, J. Moon, J.Y. Park, T.-H. Lee, N. Kang, H. Chan Kim, Effect of microstructural evolution by isothermal aging on the mechanical properties of 9Cr-1WVTa reduced activation ferritic/martensitic steels, J. Nucl. Mater. 485 (2017) 15-22.   DOI
16 L. Tan, Y. Katoh, A.A.F. Tavassoli, J. Henry, M. Rieth, H. Sakasegawa, H. Tanigawa, Q. Huang, Recent status and improvement of reduced-activation ferritic-martensitic steels for high-temperature service, J. Nucl. Mater. 479 (2016) 515-523.   DOI
17 K.S. Cho, S.I. Kim, S.S. Park, W.S. Choi, H.K. Moon, H. Kwon, Effect of Ti addition on carbide modification and the microscopic simulation of impact toughness in high-carbon Cr-V tool steels, Metall. Mater. Trans. A 47 (2015) 26-32.   DOI
18 J.E. Jam, M. Abolghasemzadeh, H. Salavati, Y. Alizadeh, The effect of notch tip position on the charpy impact energy for bainitic and martensitic functionally graded steels, Strength Mater. 46 (2014) 700-716.   DOI
19 C. Wang, C. Zhang, Z. Yang, J. Su, Y. Weng, Analysis of fracture toughness in high CoeNi secondary hardening steel using FEM, Mater. Sci. Eng. A 646 (2015) 1-7.   DOI
20 R. Wu, J. Li, Y. Su, S. Liu, Z. Yu, Improved uniformity of hardness by continuous low temperature bainitic transformation in prehardened mold steel with large section, Mater. Sci. Eng. A 706 (2017) 15-21.   DOI
21 G. Seisson, D. Hebert, I. Bertron, J.M. Chevalier, L. Hallo, E. Lescoute, L. Videau, P. Combis, F. Guillet, M. Boustie, L. Berthe, Dynamic cratering of graphite: experimental results and simulations, Int. J. Impact Eng. 63 (2014) 18-28.   DOI
22 S.S.M. Tavares, M.B. Silva, M.C.S. de Macedo, T.R. Strohaecker, V.M. Costa, Characterization of fracture behavior of a Ti alloyed supermartensitic 12%Cr stainless steel using Charpy instrumented impact tests, Eng. Fail. Anal. 82 (2017) 695-702.   DOI
23 R. Cao, J. Li, D.S. Liu, J.Y. Ma, J.H. Chen, Micromechanism of decrease of impact toughness in coarse-grain heat-affected zone of HSLA steel with increasing welding heat input, Metall. Mater. Trans. A 46 (2015) 2999-3014.   DOI
24 V. Carollo, J. Reinoso, M. Paggi, A 3D finite strain model for intralayer and interlayer crack simulation coupling the phase field approach and cohesive zone model, Comps. Struct. 182 (2017) 636-651.   DOI
25 Y. Xu, Y. Guo, L. Liang, Y. Liu, X. Wang, A unified cohesive zone model for simulating adhesive failure of composite structures and its parameter identification, Comps. Struct. 182 (2017) 555-565.   DOI
26 A. Pineau, Modeling ductile to brittle fracture transition in steels-micromechanical and physical challenges, Int. J. Fract. 150 (2008) 129-156.   DOI
27 H. Zhang, S. Li, G. Liu, Y. Wang, Effects of hot working on the microstructure and thermal ageing impact fracture behaviors of Z3CN20-09M duplex stainless steel, Acta Metall. Sin. 53 (2017) 531-538.
28 M. Perez, M. Dumont, D. Acevedo-Reyes, Implementation of classical nucleation and growth theories for precipitation, Acta Mater. 56 (2008) 2119-2132.   DOI
29 P. Wang, F. Liu, Y.P. Lu, C.L. Yang, G.C. Yang, Y.H. Zhou, Grain refinement and coarsening in hypercooled solidification of eutectic alloy, J. Cryst. Growth 310 (2008) 4309-4313.   DOI
30 C. Wang, C. Zhang, Z. Yang, J. Su, Y. Weng, Microstructure analysis and yield strength simulation in high CoeNi secondary hardening steel, Mater. Sci. Eng. A 669 (2016) 312-317.   DOI
31 A. Ghosh, P. Modak, R. Dutta, D. Chakrabarti, Effect of MnS inclusion and crystallographic texture on anisotropy in Charpy impact toughness of low carbon ferritic steel, Mater. Sci. Eng. A 654 (2016) 298-308.   DOI
32 P.V. Bizyukov, S.R. Giese, Effects of Zr, Ti, and Al additions on nonmetallic inclusions and impact toughness of cast low-alloy steel, J. Mater. Eng. Perform. 26 (2017) 1878-1889.   DOI