• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.63-67
• /
• 2015

본 연구에서는 대면적 나노 금속 격자형 편광 필름 제작에서 증착 두께에 따른 광 특성 연구를 수행하였다. 나노 금속 격자형 편광필름은 PET(Polyethylene phthalate)기판 위에 알루미늄 선 격자 구조로 구성된다. 본 연구에서는 대면적 편광필름 제작을 위한 증착공정을 통한 금속 격자 형성을 목표로 하였으며, 금속 격자형 편광 필름 제작에 있어 최적의 투과율과 소광비를 가지는 금속 박막 형성 조건을 도출하였다. 최적화 공정에 의해 나노 금속 격자형 편광필름은 140 nm 주기, 70 nm 선폭, 70 nm의 금속층 높이를 가지는 금속 격자 구조로 제작 되었다. 분석결과 600 nm 파장에서 80% 이상의 최고 투과율 및 $10^6$ 이상의 소광비를 가지는 나노 금속 격자 편광필름의 높은 광 특성을 확인하였다.

• 한국세라믹학회지
• /
• 제36권2호
• /
• pp.159-166
• /
• 1999

티타니아가 첨가된 불투명한 실리카 에어로겔의 물성 및 열처리에 따른 미세구조 변화가 연구되었다. 부분가수 분해된 TEOS-이소프로판을 용액에 titanium isopropoxide를 첨가한후 겔화시킨 습윤겔을 초임계건조(25$0^{\circ}C$, 1250 psig)하여 모노리스 타입 에어로겔을 합성하였으며, SiO2-10 mol% TiO2 에어로겔의 밀도와 기공율은 각각 0.23 g/㎤와 90% 이었다. 초임계건조시 티타늄의 함량이 증가함에 따라 수축율이 증가할 뿐만 아니라 티타니아는 anatase 상으로 상전이됨과 동시에 입자 응집에 의해 100~800nm 크기의 cluster로 에어로겔 내에 균일하게 분포되었다. 불투명한 에어로겔은 8$mu extrm{m}$ 이하의 적외 영역에서 순수 실리카 에어로겔에 비하여 매우 낮은 광투과율과 $600^{\circ}C$까지 높은 미세구조 안정성을 보여주었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.217.2-217.2
• /
• 2014

We prepared a flexible and transparent CuO/Cu/CuO multilayer electrodes on a polyethylene terephthalate (PET) substrate using a specially designed roll-to-roll sputtering system at room temperature for GFF-type touch screen panels (TSPs). By the continuous roll-to-roll sputtering of the CuO and Cu layer, we fabricated a flexible CuO(150nm)/Cu(150nm)/CuO(150nm) multilayer electrodes with a sheet resistance of $0.289{\Omega}/square$, resistivity of $5.991{\times}10^{-23}{\Omega}-cm$, at the optimized condition without breaking the vacuum. To investigate the feasibility of the CuO/Cu/CuO multilayer as a transparent electrode for GFF-type TSPs, we fabricated simple GFF-type TSPs using the diamond patterned CuO/Cu/CuO electrode on PET substrate as function of mesh line width. Using diamond patterned CuO/Cu/CuO electrode of mesh line $5{\mu}m$ with sheet resistance of 38 Ohm/square, optical transmittance of 90% at 550 nm and an average transmittance of 89% at wavelength range from 380 to 780 nm, we successfully demonstrated GFF-type touch panel screens (TPSs). The successful operation of GFF-type TPSs with CuO/Cu/CuO multilayer electrodes indicates that the CuO/Cu/CuO multilayer is a promising transparent electrode for large-area capacitive-type TPSs due to its low sheet resistance and high transparency.

• 센서학회지
• /
• 제24권1호
• /
• pp.15-21
• /
• 2015

Transparent and conductive multilayer thin films consisting of three alternating layers FZTO/Ag/$WO_3$ have been fabricated by radio-frequency (RF) sputtering for the applications as transparent conducting oxides and the structural and optical properties of the resulting films were carefully studied. The single layer fluorine doped zinc tin oxide (FZTO) and tungsten oxide ($WO_3$) films grown at room temperature are found to have an amorphous structure. Multilayer structured electrode with a few nm Ag layer embedded in FZTO/Ag/$WO_3$ (FAW) was fabricated and showed the optical transmittance of 87.60 % in the visible range (${\lambda}=380{\sim}770nm$), quite low electrical resistivity of ${\sim}10^{-5}{\Omega}cm$ and the corresponding figure of merit ($T^{10}/R_s$) is equivalent to $3.0{\times}10^{-2}{\Omega}^{-1}$. The resultant power conversion efficiency of 2.50% of the multilayer based OPV is lower than that of the reference commercial ITO. Asymmetric D/M/D multilayer is a promising transparent conducting electrode material due to its low resistivity, high transmittance, low temperature deposition and low cost components.

• Journal of Biosystems Engineering
• /
• 제38권3호
• /
• pp.185-191
• /
• 2013

Purpose: The present study focused on the estimation of soluble solids content (SSC) of chestnut using reflectance and transmittance spectra in range of VIS/NIR. Methods: Four species intact/peeled chestnuts were used for acquisition of spectral data. Transmittance and reflectance spectra were used to develop the best PLS model to estimate SSC of chestnut. Results: The model developed with the transmitted energy spectra of peeled chestnuts rather than intact chestnuts and with range of NIR rather than VIS performed better. The best $R^2$ and RMSEP of cross validation were represented as 0.54 and $1.85^{\circ}Brix$. The results presented that the reflectance spectra of peeled chestnuts by species showed the best performance to predict SSC of chestnut. $R^2$ and RMSEP were 0.55 and $1.67^{\circ}Brix$. Conclusions: All developed models showed RMSEP around $1.44{\sim}2.54^{\circ}Brix$, which is considered not enough to estimate SSC accurately. It was noted that $R^2$ of cross validation that we found were not high. For all that, grading of the fruits in two or three classes of SSC during postharvest handling seems possible with an inexpensive spectrophotometer. Furthermore, the development of estimation of SSC by each chestnut species could be considered in that SSC distribution is clustering in different range by species.

• 열처리공학회지
• /
• 제33권1호
• /
• pp.13-19
• /
• 2020

Annealing effects on the properties of Bi-doped ZnO thin films were investigated. Bi- doped ZnO thin films were deposited on quartzs substrates at 300℃ by using radio-frequency magnetron sputtering system. Post heat treatments at 600, 700, and 800℃ were performed to evaluate the effect of annealing temperatures on the structural, optical, and electrical properties of Bi-doped ZnO thin films. FE-SEM images showed the dramatic surface morphology changes by rearrangement of elements at high heat treatment temperature of 800℃. X-ray diffraction analysis indicated that the peaks of the Bi-doped ZnO thin films were same as the peaks of the (002) planes of ZnO peak-positioned at 2θ=34.0° and peak intensities and FWHMs were improved as the annealing temperatures increased. The optical transmittance was improved with increasing annealing temperatures and was over 80% in the wavelength region between 435 and 1100 nm at the annealing temperature of 700 and 800℃. With increasing annealing temperature, the electron concentrations and electron mobilities were increased. On the other hand, electric resistivity of the films were decreased with increasing annealing temperatures. These results showed that the heat treatment temperature is an important parameter to improve the structural, optical, and electrical properties of Bi-doped ZnO thin films.

• 한국표면공학회지
• /
• 제40권3호
• /
• pp.117-124
• /
• 2007

The ITO films were deposited on glass substrates by RF-superimposed dc reactive magnetron sputtering and were annealed in $N_2$ vacuum furnace with temperatures in the range of $403K{\sim}573K$ for 30 minutes. Electrical, optical and structural properties of ITO films were examined with varying annealing temperatures from 403 K to 573 K. The resistivity of as-deposited ITO films was $5.4{\times}10^{-4}{\Omega}cm$ at the sputter conditions of applied RF/DC power of 200/200 W, $O_{2}$ flow of 0.2 seem and Ar flow of 0.2 seem. As a result of annealing in the temperature range of $403K{\sim}573K$, the crystallization occurred at 423 K that is lower than the crystallization temperature caused by a conventional sputtering method. And the resistivity decreased from $5.4{\times}10^{-4}{\Omega}cm\;to\;2.3{\times}10^{-4}{\Omega}cm$, the carrier concentration and mobility of ITO films increased from $4.9{\times}10^{20}/cm^3\;to\;6.4{\times}10^{20}/cm^3$, from $20.4cm^2/Vsec\;to\;41.0cm^2/Vsec$, respectively. The transmittance of ITO films in visible became higher than 90% when annealed in the temperature range of $423K{\sim}573K$. High quality ITO thin films made by RF-superimposed dc reactive magnetron sputtering and annealing in $N_2$ vacuum furnace will be applied to transparent conductive oxides of the advanced flat panel display.

• 한국식품영양과학회지
• /
• 제36권2호
• /
• pp.246-249
• /
• 2007

Phenylalnine은 enkephalin, endorphine의 분해를 촉진하는 carboxypeptidase, aminopeptidase의 작용을 억제하는 필수아미노산으로 식욕억제, 정서 안정, 통증, 기분조절 관련 아미노산이다. 자연계의 L-phenylalanine과 비교하여 물리화학적 당량반응으로 구조가 보다 안정한 DL-phenylalnine(DLPA)을 소재로 가공적성을 조사하였다. DLPA는 $60^{\circ}C$ 이상의 온도와 농도변화에서 용해 시 98%T 이상의 값을 나타내어 가공 적합성을 보였고, 다양한 pH 범위에서도 99%T 이상의 값을 보여 용해 안정성을 확인하였다.

• 한국결정성장학회지
• /
• 제20권4호
• /
• pp.168-172
• /
• 2010

양전하를 갖는 poly(allylamine hydrochloride)(PAH)와 음전하를 갖는 poly(acrylic acid)(PAA) 전해질 폴리머를 사용하여 layer-by-layer(LBL) self-assembly 방법에 의해 초친수 특성을 갖는 박막을 제조하였다. PAH/PAA 박막의 밀착강도를 증가시키기 위하여 glutaraldehyde(GA) 수용액을 이용하여 amine-aldehyde의 화학반응에 따른 박막의 표면구조 변화, 막두께, 투과율, 접촉각, 밀착강도 특성을 측정하였다. PAH와 PAA 용액 침적 사이에 기판을 GA 수용액에 침적함으로써 박막의 두께는 감소하였지만 밀착강도는 2배 이상 증가하였다. 밀착강도의 증가는 PAH 와 GA의 amine-aldehyde의 화학반응에 의한 결과라는 것을 fourier transform infrared(FT-IR) spectroscopy를 사용하여 확인하였다. 제조된 PAH/PAA and PAH/GA/PAA 박막은 물 접촉각 $5^{\circ}$이하의 초친수 박막 특성을 보여주었고, 550 nm 파장에서 91.3% 이상의 높은 투과율을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제26권8호
• /
• pp.602-607
• /
• 2013

Concern for the TOS (Transparent Oxide Semiconductor) is increasing with the recent increase in interest for flexible device. Especially MgZnO has attracted a lot of attention. $Mg_xZn_{1-x}O$, which ZnO-based wideband-gap alloys is tuneable the band-gap ranges from 3.36 eV to 7.8 eV. In particular, the flexible substrate, the crystal structure of the amorphous as well as the surface morphology is not good. So research of MgZnO thin films growth on flexible substrate is essential. Therefore, in this study, we studied on the effects of the oxygen partial pressure on the structural and crystalline of $Mg_{0.1}Zn_{0.9}O$ thin films. MgZnO thin films were deposited on PES substrate by using pulsed laser deposition. We used XRD and AFM in order to observe the structural characteristics of MgZnO thin films. UV-visible spectrophotometer was used to get the band gap and transmittance. Crystallization was done at a low oxygen partial pressure. The crystallinity of MgZnO thin films with increasing temperature was improved, Grain size and RMS of the films were increased. MgZnO thin films showed high transmittance over 80% in the visible region.