• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.668-678
• /
• 2003

For the purpose to facilitate development of high-speed spindle units (SUs) running on rolling bearings, we have developed a beam element model, algorithms, and software for computer analysis of thermal characteristics of SUs. The thermal model incorporates a model of heat generation in rolling bearings, a model of heat transfer from bearings, and models for estimation of temperature and temperature deformations of SU elements. We have carried out experimental test and made quantitative evaluation of the effect of operation conditions on friction and thermal characteristics of the SUs of grinding and turning machines of typical structures. It is found out that the operation conditions make stronger effect on SU temperatures when rpm increases. A comparison between the results of analysis and experiment proves their good mutual correspondence and allows us to recommend application of the models and software developed for design and research of high-speed SUs running on rolling bearings.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1403-1410
• /
• 1997

Because streaming mode connection server suitable to wide area ATM networks performs transmission, reception and lookup with time restriction for the transmission time of a cell, it has demerits of large cell loss incase that burst traffic occurs. Therefore, in this paper to decrease cell loss we propose a high speed CAM (Content Addressable Memory) which is capable of processing data of streaming mode connections server at a high speed. the proposed CAM is applied to forwarding table VPC map which performs function to output connection numbers about input VPI(Virtual Path Identifier)/VCI(Virtual Channel Identifier). The designed high speed CAM consist of DBL(Dual Bit Line) CAM structure performed independently write operation and match operation and two-port SRAM structure. Also, its simulation verification and full-custom layout is performed by Hspice and Composs tools in 0.8 .$\mu$m design rule.

• 전기학회논문지
• /
• 제63권6호
• /
• pp.834-840
• /
• 2014

When the high speed train (KTX) departs from station in the high-speed line, intermittent on-board signal disappearance causes a hindrance of the operation punctuality. Therefore, we have a research objective to verify the causes of hindrance and to find an improvement plan. process of research, when train leaves the station, we applied sand on the rail to improve adhesive power, that sand has an effect on the ATC(Automatic Train Control) signal wave. We detected & analyzed signal waves which is came from detecting device by changing operation condition in accordance with sand material overage detection to be achieved.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.341-346
• /
• 2004

Performance Evaluation of end mills for high speed cutting has been performed in a view of dynamic characteristics and noise-vibration under operation. The tools tested in this research consist of three foreign country made and one korean made. In addition, numerical models using finite element method are established, which are confirmed by experimental results. The evaluation results has been feedback for developing high performance end mills fur high speed cutting tools.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.478-483
• /
• 2003

Performance Evaluation of end mills for high speed cutting has been performed in a view of dynamic characteristics and noise-vibration under operation. The tools tested in this research consist of three foreign country made and one korean made. In addition, numerical models using finite element method are established, which are confirmed by experimental results. The evaluation results has been feedback fur developing high performance end mills for high speed cutting tools.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1900-1906
• /
• 2008

신도시 개발 등으로 대도시의 생활권이 확대됨에 따라 수도권 교통의 광역화가 지속적으로 진행되고 있어 대도시권내의 광역교통문제해소 및 혼잡비용 최소화를 위한 체계적이고 지속 가능한 장기 마스터플랜 구상이 필요하게 되었다. 이에 따라, 최근 경기도에서는 동탄 신도시와 서울 강남을 20분대에 연결할 수 있는 대심도 급행전철 사업을 구상하였다. 국토부에서는 경부고속철도 2단계와 호남고속철도 완공에 따른 선로용량 부족해소와 수도권 및 경기 남부 지역 주민들에게 고속철도 서비스제공을 위한 강남권 고속철도 노선(수서${\sim}$동탄${\sim}$평택) 건설이 필요한 것으로 "수도권 철도망 개선방안 연구용역(2007.12)" 결과를 발표하였다. 경기도에서 추진 중인 광역급행전철과 강남권 고속철도 노선이 중복됨에 따라 국토의 이용 효율성 향상과 국가재정의 효율적 투자를 위해 고속철도의 선로 여유용량을 활용한 광역급행전철 혼용에 대한 검토가 필요할 것으로 판단된다. 따라서, 본 연구에서는 고속철도와 광역급행전철을 혼용 운행할 경우 노반분야 및 E & M 기술조건, 중간역 계획, 열차운영계획 등의 분석을 통해 최적화된 혼용운영 방안과 사업비 절감효과 등을 제시함으로써 동일선로에서 이종의 열차가 운행됨에 따른 철도사업의 투자효율성 제고 방안을 제시하고자 한다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권1호
• /
• pp.33-42
• /
• 2001

In switched reluctance motor(SRM) deives, the turn-on and turn-off angles of each phase switch should be accurately controlled for accuracy and efficiency. The accuracy of the switching angles is mainly dependent upon the resolution of the encoder and the sampling period of the microprocessor, that are used to provide the information of the rotor position and to implement a control algorithm of the SRM, respectively. Thus, the higher the speed of the SRM is increased, the larger the amount of the switching angle deviations are from preset turn-on and turn-off angles. Consequently, the motor can not be driven stably high speed region. There fore, a simples and low cost encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using a simple digital logic circuit is also presented for a wide speed range operation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권4호
• /
• pp.641-647
• /
• 2004

By most sensorless speed control schemes for induction motor. the control performances in high speed range are good, but it is difficult to obtain satisfactory results in low speed region. This paper proposes a new method controlling the low and the high speed regions separately to attain the stable operation in the overall range. The current error compensation method, in which the controlled stator voltage is applied to the induction motor so that the error between stator currents of the numerical model and the actual motor can be forced to decay to zero as time proceeds. is used in the low speed region In the high speed region. the method with adaptive observer is utilized. This control strategy contains an adaptive state observer for flux estimation. The rotor speed can be calculated from the rotor flux and the motor currents. The experimental results indicate good speed and load responses from the very low speed range to the high, and also show accurate speed changing performance between the low and the high speed range.

• ETRI Journal
• /
• 제29권6호
• /
• pp.835-837
• /
• 2007

A multi-bit sigma-delta modulator architecture is described for low-distortion performance and a high-speed operation. The proposed architecture uses both a delayed code and a delayed differential code of analog-to-digital converter in the feedback path, thereby suppressing signal components in the integrators and relaxing the timing requirement of the analog-to-digital converter and the scrambler logic. Implemented by a 0.13 ${\mu}m$ CMOS process, the sigma-delta modulator achieves high linearity. The measured spurious-free dynamic range is 89.1 dB for -6 dBFS input signal.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.899-904
• /
• 2007

Improvement projects has been progressed for railway electrification and double track line in the conventional line as well as high speed line for the high speed and large transportation capability of railway. Especially, many variable operation plans are possible such as interaction between high speed line and conventional line and operation of tilting train due to the electrification of the conventional line. Railway electrification is more energy efficient and environmentally-friendly, but it has some problems such as an enormous initial construction and maintenance costs and electrical accidents. Therefore, the more intensive research will be progressed about railway electrification effectiveness for the continuous electrification project. So, we analyzed railway electrification effectiveness about the energy side using annual operation data of electric car and diesel car. The energy side was divided into energy costs and national energy consumption for analyzing electrification effectiveness about entire line and specific line. We verified advantage of energy costs and national energy consumption in this paper and this result will contribute to the progress of the continuous electrification project and the more efficient operation ways in electrification line