• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.16-22
• /
• 2008

We fabricated thermally-evaporated 10 nm-Ni/30 nm and 70 nm Poly-Si/200 nm-$SiO_2/Si$ structures to investigate the thermal stability of nickel silicides formed by rapid thermal annealing(RTA) of the temperature of $300{\sim}1100^{\circ}C$ for 40 seconds. We employed for a four-point tester, field emission scanning electron microscope(FE-SEM), transmission electron microscope(TEM), high resolution X-ray diffraction(HRIXRD), and scanning probe microscope(SPM) in order to examine the sheet resistance, in-plane microstructure, cross-sectional microstructure evolution, phase transformation, and surface roughness, respectively. The silicide on 30 nm polysilicon substrate was stable at temperature up to $900^{\circ}C$, while the one on 70 nm substrate showed the conventional $NiSi_2$ transformation temperature of $700^{\circ}C$. The HRXRD result also supported the existence of NiSi-phase up to $900^{\circ}C$ for the Ni silicide on the 30 nm polysilicon substrate. FE-SEM and TEM confirmed that 40 nm thick uniform silicide layer and island-like agglomerated silicide phase of $1{\mu}m$ pitch without residual polysilicon were formed on 30 nm polysilicon substrate at $700^{\circ}C\;and\;1000^{\circ}C$, respectively. All silicides were nonuniform and formed on top of the residual polysilicon for 70 nm polysilicon substrates. Through SPM analysis, we confirmed the surface roughness was below 17 nm, which implied the advantage on FUSI gate of CMOS process. Our results imply that we may tune the thermal stability of nickel monosilicide by reducing the height of polysilicon gate.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.58-67
• /
• 2010

Platy silver powders with varied size and thickness were prepared by polyol process with $PdCl_2$ in ethylene glycol and characterized its properties and investigated the effects of reaction time, $NH_4OH$, PVP(poly-vinylpyrrolidone) and $PdCl_2$. The characteristics of the products were verified by scanning electron microscopy(SEM), high resolution transmitted electron microscopy(HR-TEM), X-ray diffraction(XRD) and particle size analyzer(PSA) and image analyzer. Platy silver powder was prepared about $5.5\;{\mu}m$ of size and $0.2\;{\mu}m$ at 120minute. It was found that the size of powders increased by the increasing of $NH_4OH$ and $PdCl_2$ concentrations, and the thickness of powders was decreased by increasing of PVP concentration.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.222-222
• /
• 2013

GaN 기반 반도체는 넓은 bandgap을 가지고 있어 가시광부터 자외선까지 다양한 광전소자에 유용하게 사용된다. 광전소자중 발광다이오드의 경우 대부분 사파이어 기판위에 성장된다. 하지만 사파이어와 GaN의 격자 불일치 및 열팽창 계수의 차이로 인해 고품질의 GaN를 성장하기가 어렵다. 특히 열팽창 계수의 차이는 GaN 성장 공정이 고온에서 이루어지기 때문에 성장후 상온으로 온도가 떨어질 때 웨이퍼의 bowing을 발생시키고 동시에 dislocation이나 crack과 같은 결함이 생성되 GaN 성장막의 품질을 떨어트린다. 웨이퍼의 크기가 커지면 커질수록 웨이퍼 bowing은 커져 이에 대한 연구는 중요하다. 본 논문에서 2인치 사파이어 기판위에 성장된 GaN의 bow특성을 알아보기 위해 먼저 simulation을 하였고 실제로 성장된 GaN 웨이퍼와 비교를 하였다. c-plane 사파이어 기판위에 성장된 c-plane GaN의 bow특성을 알아보기 위해 성장 온도 $1,100^{\circ}C$에서 GaN두께를 1 ${\mu}m$에서 10 ${\mu}m$까지 1 ${\mu}m$씩 변화시켜 가며 simulation을 하였다. GaN두께가 1 ${\mu}m$일때는 bow가 11 ${\mu}m$, 6 ${\mu}m$ 일때는 54.7 ${\mu}m$, 10 ${\mu}m$ 일때는 108 ${\mu}m$를 얻어 GaN두께가 1 ${\mu}m$씩 증가할 때 마다 bow가 약 10 ${\mu}m$씩 증가하였다. 성장온도에 대한 영향을 알아보기 위해 $700^{\circ}C$에서 $1,200^{\circ}C$까지 $100^{\circ}C$씩 증가시켜며 bow특성 simulation을 하였다. 6 ${\mu}m$성장된 GaN의 경우 성장온도가 $100^{\circ}C$ 씩 증가할 때 bow는 약 6 ${\mu}m$ 증가하였다. 실제 성장된 c-plane GaN웨이퍼와 비교하기 위해 GaN을 각각 3 ${\mu}m$와 6 ${\mu}m$를 성장시켰고 high resolution x-ray diffraction장비를 사용하여 bow를 측정한 결과 각각 28 ${\mu}m$와 61 ${\mu}m$ 였고 simulation결과는 각각 33 ${\mu}m$와 65.5 ${\mu}m$를 얻어 비슷한 결과를 보였다. c-plane 사파이어 기판위에 성장된 c-plane GaN는 방향에 무관하게 동일한 bow 특성을 가지는 반해 r-plane 사파이어 기판위에 성장된 a-plane GaN는 방향에 따라 다른 bow특성을 보인다. a-plane GaN 이방향성적인 bow 특성을 알아보기 위해 simulation을 하였다. $1,100^{\circ}C$에서 a-plane GaN을 성장할 때 두께가 1 ${\mu}m$ 증가할 때마다 bow가 c축 방향으로는 21.7 ${\mu}m$씩 증가하였고 m축 방향으로는 11.8 ${\mu}m$ 씩 증가하여 매우 큰 이방향성적인 bow 특성을 보였다. 실제 r-plane 사파이어 기판위에 성장된 a-plane GaN의 bow를 측정하였고 simulation 결과와 비교해 보았다.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.661-674
• /
• 2023

From the seafloor of Taean, Chungcheongnamdo Province, a ship of the Joseon Dynasty was discovered for the first time in the history of underwater excavations in Korea in 2014 and was named Mado Shipwreck No. 4. A total of 27 unused whetstones loaded as tribute were discovered on the hull of Mado No. 4, which revealed that Mado Shipwreck No. 4 was a Grain transport ship that sank while carrying tribute from Naju to Hanyang between 1417 and 1425 (King Taejong to King Sejong). All of the 27 whetstones are in the shape of narrow and long sticks. The average values of length, width, thickness, and weight are 161.5 mm, 36.1 mm, 22.7 mm, and 253.2 g, respectively. The result of X-ray diffraction analysis shows that the constituent minerals are quartz, alkali feldspar, and plagioclase, which is similar to that of the high-resolution digital stereomicroscope analysis. The average porosity of Mado-2672 and 2673 is 2.69% and 1.78%, respectively, and the average surface hardness is 807.2HLD and 834.5HLD, respectively. It is interpreted that if the porosity increases beyond a certain level, it affects the decrease in surface hardness. All of these are made of feldspathic sandstones with an average SiO₂ content of 74.51% and were confirmed to be suitable as grindstones. They are all medium whetstones when classified based on the SiO₂ content. These whetstones are small in size and weight and are convenient to carry, so they are presumed to be a type of non-stationary whetstone, and are estimated to have been mainly used in the fields such as weapon polishing and craft production during the Joseon Dynasty.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.359-364
• /
• 2008

We have investigated optical and structural properties of $Al_{0.3}Ga_{0.7}N$/GaN and $Al_{0.3}Ga_{0.7}N/GaN/Al_{0.15}Ga_{0.85}N/GaN$ heterostructures (HSs) grown by metal-organic chemical vapor deposition, by means of Hall measurement, high-resolution X-ray diffraction, and temperature- and excitation power-dependent photoluminescence (PL) spectroscopy. A strong GaN band edge emission and its longitudinal optical phonon replicas were observed for all the samples. At 10 K, a 2DEG-related PL peak located at ${\sim}\;3.445\;eV$ was observed for $Al_{0.3}Ga_{0.7}N$/GaN HS, while two 2DEG peaks at ${\sim}\;3.42$ and ${\sim}\;3.445\;eV$ were observed for $Al_{0.3}Ga_{0.7}N/GaN/Al_{0.15}Ga_{0.85}N/GaN$ HS due to the additional $Al_{0.15}Ga_{0.85}N$ layers. Moreover, the emission intensity of the 2DEG peak was higher in $Al_{0.3}Ga_{0.7}N/GaN/Al_{0.15}Ga_{0.85}N/GaN$ HS than in $Al_{0.3}Ga_{0.7}N$/GaN HS probably due to an effective confinement of the photo-excited holes by the additional $Al_{0.15}Ga_{0.85}N$ layers. The 2DEG-related emission intensity decreased with increasing temperature and disappeared at temperatures above 150 K. To investigate the origin of the new 2DEG peaks, the energy-band structure for multiple AlGaN/GaN HSs were simulated and compared with the experimental data. As a result, the observed high- and low-energy peaks of 2DEG can be attributed to the spatially-separated 2DEG emissions formed at different AlGaN/GaN heterointerfaces.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.528-537
• /
• 2008

60 nm and 20 nm thick hydrogenated amorphous silicon(a-Si:H) layers were deposited on 200 nm $SiO_2$/single-Si substrates by inductively coupled plasma chemical vapor deposition(ICP-CVD). Subsequently, 30 nm-Ni layers were deposited by an e-beam evaporator. Finally, 30 nm-Ni/(60 nm and 20 nm) a-Si:H/200 nm-$SiO_2$/single-Si structures were prepared. The prepared samples were annealed by rapid thermal annealing(RTA) from $200^{\circ}C$ to $500^{\circ}C$ in $50^{\circ}C$ increments for 40 sec. A four-point tester, high resolution X-ray diffraction(HRXRD), field emission scanning electron microscopy(FE-SEM), transmission electron microscopy(TEM), and scanning probe microscopy(SPM) were used to examine the sheet resistance, phase transformation, in-plane microstructure, cross-sectional microstructure, and surface roughness, respectively. The nickel silicide from the 60 nm a-Si:H substrate showed low sheet resistance from $400^{\circ}C$ which is compatible for low temperature processing. The nickel silicide from 20 nm a-Si:H substrate showed low resistance from $300^{\circ}C$. Through HRXRD analysis, the phase transformation occurred with silicidation temperature without a-Si:H layer thickness dependence. With the result of FE-SEM and TEM, the nickel silicides from 60 nm a-Si:H substrate showed the microstructure of 60 nm-thick silicide layers with the residual silicon regime, while the ones from 20 nm a-Si:H formed 20 nm-thick uniform silicide layers. In case of SPM, the RMS value of nickel silicide layers increased as the silicidation temperature increased. Especially, the nickel silicide from 20 nm a-Si:H substrate showed the lowest RMS value of 0.75 at $300^{\circ}C$.