• The Journal of Korean Physical Therapy
• /
• v.31 no.1
• /
• pp.35-39
• /
• 2019

Purpose: The purpose of this study was to assess the intra-rater and inter-rater reliability and validity of pelvic tilting angle measurements using a smart phone-based inclinometer (Clino) compared to a palpation meter (PALM) in the standing and sitting position. This study used an interchangeable method with Clino to measure the pelvic tilting angle in the standing and sitting positions. Methods: Twenty healthy subjects were recruited. Measurements of the pelvic tilting angle in the standing and sitting positions were obtained by two examiners using the Clino and PALM. A resting session was conducted 10 minutes later to assess the intra and inter rater reliability. To assess validity of the measurement using Clino, a PALM was used as the gold standard. The intra-class correlation coefficient (ICC) was used to determine the intra and inter rater reliability of Clino and a PALM. To assess the validity, the Pearson correlation coefficients were used for two measurement techniques to measure the pelvic tilting angle in the standing and sitting positions. The statistical significance was set to ${\alpha}=0.05$. Results: Measurements of the pelvic tilt had high inter-rater reliability in the standing (ICC=0.82) and sitting (ICC=0.88) positions using Clino and intra-rater reliability in the standing (ICC=0.87) and sitting (ICC=0.91) positions using Clino. Measurements of the pelvic tilt had high validity by a comparison of PALM and Clino in the standing (r=0.83) and sitting (r=0.89) positions (p<0.05). Conclusion: The use of Clino can be recommended as a tool to replace the PALM and measure the pelvic tilt angle in the standing and sitting positions while maintaining the clinical reliability and validity.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.1
• /
• pp.40-47
• /
• 2021

Objective: The purpose of this study is to prove the reliability and validity of the Power breath K5 and to compare it with pony FX. Power breathe K5 is one type of device can assess automatically Maximum inspiratory pressure (MIP), Peak inspiratory pressure, Peak inspiratory flow (PIF). Design: Cross-sectional study. Methods: Thirty-five COPD patients participated in the test to investigate for the intra relater reliability and concurrent validity. The tests MIP, Vital capacity (VC), PIF were measured by Powerbreathe K5 and Pony Fx. Data was analyzed by intraclass correlation reliability (ICC) value and a standard error of measurement and Bland-Altman plots for reliability and pearson correlation for validity. Results: Intra rater reliability of the Powerbreathe K5 was very high at MIP (ICC=0.977 95%CI 0.956~0.989, SEM=8.665, MDC=0.295), PIF (ICC=0.966 95%CI 0.933~0.93, SEM=8.665, MDC=0.295), VC (ICC=0.949 95CI 0.902~0.974, SEM=0.042, MDC=0.116). The Powerbreath K5 was significant correlation compared with Pony Fx in assessment for MIP (r=0.971, p<0.05) and vital capacity (r=0.534, p<0.05). Conclusion: In this study, We investigated the clinical usefulness of the Powerbreath K5 in evaulating the MIP, VC and PIF with COPD patients with high reliability and validity.

• Korean Journal of Materials Research
• /
• v.21 no.5
• /
• pp.283-287
• /
• 2011

As the performance of microelectronic devices is improved, the use of copper as a heat dissipation member is increasing due to its good thermal conductivity. The high thermal conductivity of copper, however, leads to difficulties in the joining process. Satisfactory bonding with copper is known to be difficult, especially if high shear and peel strengths are desired. The primary reason is that a copper oxide layer develops rapidly and is weakly attached to the base metal under typical conditions. Thus, when a clean copper substrate is bonded, the initial strength of the joint is high, but upon environmental exposure, an oxide layer may develop, which will reduce the durability of the joint. In this study, an epoxy adhesive formulation was investigated to improve the strength and reliability of a copper to copper joint. Epoxy hardeners such as anhydride, dihydrazide, and dicyandiamide and catalysts such as triphenylphosphine and imidazole were added to an epoxy resin mixture of DGEBA and DGEBF. Differential scanning calorimetry (DSC) analyses revealed that the curing temperatures were dependent on the type of hardener rather than on the catalyst, and higher heat of curing resulted in a higher Tg. The reliability of the copper joint against a high temperature and high humidity environment was found to be the lowest in the case of dihydrazide addition. This is attributed to its high water permeability, which led to the formation of a weak boundary layer of copper oxide. It was also found that dicyandiamide provided the highest initial joint strength and reliability while anhydride yielded intermediate performance between dicyandiamide and dihydrazide.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.2 s.57
• /
• pp.413-427
• /
• 1997

This research is based on the Consumption Values Theory proposed by Sheth(1991). The purpose of this research is finding the factors related to the process of hospital choice. The expectation of six hospital outpatients 600 was analyzed by six consumption values categories: functional value, social value, emotional value, rarity value, condition value, health related values. The main results of this research is as following; 1. In the result of factor analysis 22 consumption value factors which affect the hospital preference were extracted; kindness/clearness, service speed, comfort of space, technical competence in functional values, high income/active social life, low income/blue collar unmarried/man, middle aged/big family, woman/married, introvert in social values, high-class, comfort, reliability in emotional value, newness, classiness in rarity value, social relationship, close to residence, social reputation in conditional values, priority on health, health behavior, active sense of value on health in health related values. 2. The difference of consumption values among hospital types were analyzed. The critical factors in reference for corporate hospitals newly established were kindness/clearness, service speed, convenience, classiness, comfort, and newness. University hospitals were preferred by the factors of reliability, and social reputation. In general hospital, convenience and close to residence were critical factor. 3. In logistic regression, age, marital status, education level and income as socio-demographic variables were significantly related to general hospital choice. Also service speed and close to residence were positively and high income/active social life and high class value were negatively related to general hospital choice. On university hospital choice, age and marital status, education show posive relationship whereas income showing negative relationship. Kindness/clearness, service speed, comfort of space, unmarried/man, comfortable feeling, newness and close to residence showed negative relationship with university hospital selection whereas technical competence, reliability in emotional value, classiness in rarity value, social relationship in functional values showed positive relationship. Lastly kindness/clearness, comfort of space, high income/active social life, unmarried/man, high-class, comfort and newness were positively related to corporate hospitals newly established choice in contrast to negative relationship in reliability in emotional value and classiness. In summary, we found that hospital user also choose to hospital in base of various consumption value. Further studies to investigate the hospital consumer behavior will be needed.

• Current Photovoltaic Research
• /
• v.10 no.2
• /
• pp.56-61
• /
• 2022

Recently, the expansion of the domestic solar market due to the promotion of eco-friendly and alternative energy-related policies is promising, and it is expected to lead the high-efficiency/high-power module market based on M10 or larger cells to reduce LCOE, 540-560W, M12 based on M10 cells Compared to the existing technology with an output of 650-700W based on cells, it is necessary to secure competitiveness through the development of modules with 600W based on M10 cells and 750W based on M12 cells. For the development of high efficiency/high-power n-type bifacial, it is necessary to secure a lightweight technology and structure due to the increase in weight of the glass to glass module according to the large area of the module. Since the mechanical strength characteristics according to the large area and high weight of the module are very important, design values such as a frame of a new structure that can withstand the mechanical load of the Mechanical Load Test and the location of the mounting hole are required. In this study, a structural analysis design model was introduced to secure mechanical reliability according to the enlargement of the module area, and the design model was verified through the mechanical load test of the actual product. It can be used as a design model to secure the mechanical reliability required for PV modules by variables such as module area, frame shape, and the location and quantity of mounting holes of the structural analysis model verified. A relationship of output drop can be obtained.

• Journal of Welding and Joining
• /
• v.20 no.2
• /
• pp.90-94
• /
• 2002

FC-BGA has advantages over other interconnection methods including high I/O counts, better electrical performance, high throughput, and low profile. But, FC-BGA has a lot of reliability issues. The 2nd level solder joint reliability of the FC-BGA with large chip on laminate substrate was studied in this paper. The purpose of this study is to discuss solder joint failures of 2nd level thermal cycling test. This work has been done to understand the influence of the structure of package, the properties of underfill, the properties and thickness of bismaleimide tiazine substrate and the temperature range of thermal cycling on 2nd level solder joint reliability. The increase of bismaleimide tiazine substrate thickness applied to low modulus underfill was improve of solder joint reliability. The resistance of solder ball fatigue was increased solder ball size in the solder joints of FC-BGA.

• Physical Therapy Korea
• /
• v.17 no.4
• /
• pp.55-60
• /
• 2010

Clinical measures that Quantify falling risk factors are needed for the accurate evaluation of patients and to plan an intervention strategy. The purpose of this study was to examine the test-retest and interrater reliability of the dynamic gait index (DGI) for persons with Parkinson's disease (PD). A total of 22 idiopathic PD patients were recruited from rehabilitation hospital, Korea in this study. The DGI was assessed in two sessions that were, three days apart. We also measured Berg balance test (BBT) and geriatric depression scale (GDS) for concurrent validity with DGI. Intrarater and interrater reliability (.96 and .98 respectively) for DGI were high. indicating good agreement. The DGI was showed a good positive correlation with the BBS (r=.852). but not GDS (r=-.462). Intrarater and interrater reliability of DGI were high in people with PD. The DGI could be a reliable measure to evaluate functional postural control during gait activities in the PD population, and the ability of DGI to detect real change is acceptable in research and clinical settings.

• Physical Therapy Korea
• /
• v.17 no.2
• /
• pp.10-16
• /
• 2010

This study was undertaken to develop the scapulometer, a measuring tool for scapular winging, and to determine the reliability of scapulometer. Thirty subjects with scapular winging greater than 2 cm participated in this study. Two examiners measured scapular winging using the scapulometer. Standardized measurement position of each subject was as follows: neutral position of shoulder and wrist, $90^{\circ}$ flexion of elbow, and cuff weight of 5% and 10% of body weight (BW) to neutral wrist. The interrater and intrarater reliability were calculated with an intraclass correlation coefficient (ICC) with 95% confidence interval (CI) and standard error of measurement (SEM) at 5% BW and 10% BW. The level of scapular winging was tested between 5% BW and 10% BW with a paired t-test. The interrater reliability was shown to be high at 5% BW (ICC(2,k)=.955, 95% CI=.900~.979, SEM=.07) and at 10% BW (ICC(2,k)=.968, 95% CI=.930~.985, SEM=.06). The intrarater reliability was shown to be high at 5% BW (ICC(2,k)=.921, 95% CI=.842~.961, SEM=.09) and at 10% BW (ICC(2,k)=.906, 95% CI=.813~.954, SEM=.10). The level of scapular winging was significantly different between 5% BW and 10% BW. Conclusively, it is demonstrated that the scapulometer is an objective and qualitative measurement tool for scapular winging.

• Journal of Sensor Science and Technology
• /
• v.14 no.3
• /
• pp.198-205
• /
• 2005

Recently, the systems using multiple sensors such as magnetic, acoustic and pressure sensor are used for detection of underwater objects or vehicles. Those systems have difficulty of maintenance and repair because they operate underwater. Thus, this paper describes a hybrid detection system with long term operating reliability. This has a multi-signal transmission structure to have a high reliability. First, a signal transmission & receiving part, which transfers data from underwater sensors to land and receive control message from land through optical cable, has 4 multi-path. Second, the nodes for signal transmission are connected dually each other with single-hop construction and sensors are connected to a couple of neighboring nodes. This enables the output signal to transmit from a node to the next node and the next but one node together. Also, the signal from a sensor can be transmitted to two nodes at the same time. Therefore, the system with this construction has high reliability in long term operation because it makes possible to transmit sensor data to another node which works normally although a transmission node or cable in system have some faults.

• Child Health Nursing Research
• /
• v.8 no.3
• /
• pp.272-280
• /
• 2002

Purpose: This study was conducted to test the reliability and validity of Family Burden Questionnaire. Method: The subjects were 156 caregivers of children with acute or chronic disease. To test the reliability, internal consistency using Cronbach's α coefficient was analyzed, and factor analysis, known-group technique, and concurrent validity were utilized for validity test. Result: Cronbach's α coefficient of the tool was .89. Six factors were identified and explained 58.7% of the total variance. Through analysis using known-group technique, the difference of family burden between acute and chronic disease groups was statistically significant(t= -4.09, p<.001). Correlations with mood state, other family burden score by Family Burden Interview Schedule, quality of life, and health symptoms were also relatively high and statistically significant. Conclusion: Family Burden Questionnaire showed a relatively high validity and reliability to measure the burden of caregivers caring patients with various chronic conditions in Korea. For the further study, it may be reconsidered to identify the factor structure of the Family Burden Questionnaire with the various subjects from different age groups.