• Journal of Korea Multimedia Society
• /
• v.20 no.7
• /
• pp.1046-1053
• /
• 2017

We propose a design method of high accuracy power measuring device and the method of securing the reliability of the measured data. As a design method for the development of the high accuracy power measuring device, the circuit was made by reflecting the high accuracy power measuring ICs and the CT (Current Transformer). To ensure the reliability of the power meter, we requested to the watt-hour meter certified testing organization to measure the error rate, and the error rate of active power based on the "Wattmeter Technical Standard(Revision notify 2014-283)" was measure, and the error rate was confirmed to be less than 0.1%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.530-532
• /
• 2002

We have developed a low-power, high slew-rate OP-AMP for large size and high resolution TFT-LCDs which have 8${\mu}$A quiescent current with settling time less than 6${\mu}$sec. The proposed OP-AMP contains newly developed the driving circuit of class-AB output stage which can achieve a low quiescent current less than 8${\mu}$A and a slew-rate higher than 3.14V/${\mu}$sec.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.1
• /
• pp.166-178
• /
• 2014

Purpose of this study was conducted to investigate the factors influencing smartphone addiction of high school students. The data were collected from 351 high school students in B city and analyzed with t-test, ANOVA and multiple regression by using SPSS 18.0 program. The smartphone addiction rate was 20.8%, which the high risk group rate was 8.5% and potential risk group rate was 12.3%. The significant factors of smartphone addiction were using time in weekend, accident in using smartphone, aggression, depression, attachment to peer and behavior control of learning attitude. And these factors explained 33.4% of the variance in smartphone addiction. In conclusion, the results from this study indicated a need to develop the intervention program to prevent smartphone addiction.

• Transactions of Materials Processing
• /
• v.8 no.6
• /
• pp.576-582
• /
• 1999

The high temperature behavior of Al 6061 alloy was characterized by the hot torsion test in the temperature ranges of 400∼550℃ and the strain rate ranges of 0.05∼5/sec. To decide optimum deformation condition, three types of deformation maps were individually made from the critical strain (εc). deformation resistance(σp) and deformation efficiency (η). The critical strain(εc) for dynamic recrystallization (DRX) which was decided from the inflection point of strain hardening rate(θ) - effective stress (σ) curve was about 0.65 times of peak strain (εp). The relationship among deformation resistance (peak stress, σp), strain rate (ε), and temperature (T) could be expressed by ε=2.9×1013[sinh(0.0256σp]7.3exp (-216,000/RT). The deformation efficiency (η)which was calculated on the basis of the dynamic materials model (DMM) showed high values at the condition of 500∼550℃, 5/sec for 100% strain. The results from three deformation maps were compared with microstructures. The best condition of plastic deformation could be determined as 500℃ and 5/sec.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.406-409
• /
• 2000

This paper proposes a method that enables us to implement the recursive least squares (RLS) algorithm at, high throughput rate using fewer processing elements (PEs). It is known that the pipeline processing can provide a high throughput rate. But, pipelining is effective only when enough number of PEs are available. The proposed method achieves high throughput rate using a few PEs. The effectiveness of the proposed method is verified through simulations on programmable digital signal processors (in the following, DSP processors).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.3
• /
• pp.62-73
• /
• 2003

The characteristics of constitutive equations, for hydrocodes, were Investigated by the comparison between the smoothed particle hydrodynamcis simulation and the experiment of rod impact test which resulted in a deformation history of impacting front where high strain and high strain rate dominate. The constitutive equations used in the simulation Is J-C(Johnson-Cook) model, Z-A(Zerilli-Armstrong) model, and S-C-G(Steinberg-Cochran-Guinan) model. The modification of Z-A model, based on the increased effect of strain-rate hardening, showed better correlation with expriment.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.2
• /
• pp.86-91
• /
• 2011

In the underwater communications, the acoustic channel is in poor communication conditions, such as long propagation delay, narrow bandwidth, and high bit-error rate. For these bad acoustic channels, we propose an efficient automatic repeat request (ARQ) for multi-hop underwater network by using the concepts of concurrent bi-directional transmission, multiple sub-packets, and overhearing data packet instead of the acknowledgement signal. Our results show that the proposed ARQ significantly reduces the transmission latency especially in high BER compared with the existing Stop and Wait ARQ.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.723-730
• /
• 2006

In the electrical railway, the tension ascension of contact wire is essential to speed up of train and current collection performance of catenary largely depends on the tension. The tension variation rate of the tensioning device used in existing line limits within 5%, and the tension variation rate of the spring-type tensioning device installed at the section where tensioning length is short bounds within 15%. So it is urgent for us to localize it for high speed line, which the tension variation rate is limited within 3%. Therefore in this study, a pulley-type tensioning device for high speed line is developed. To verify the performance of developed device, a performance test, overload test and failure test is carried out under the code of the Kyung-Bu High Speed line. And it is secured durability performance through a fatigue test.

• Korean Journal of Health Education and Promotion
• /
• v.19 no.2
• /
• pp.127-138
• /
• 2002

Objective: This prospective survey assessed factors associated with influenza vaccination behaviors among high-risk adults. Methods: 106 patients aged 65 or high risk for complications of influenza were interviewed to identify influencing factors to vaccination. Six potential consequences of Influenza infection and nine factors of vaccination were analysed between compliance and non-compliance groups. Results: Among the 106 patients, the vaccination rate was 62.3%. The rate of the group under the sixties was 37.0010, but the rate over the sixties was 88.5%. Factors in dependently associated with both influenza vaccination behaviors included older age, chronic disease, and especially, related to factors in older age were having positive attitudes toward immunization, perceived severity of infection and willingness to comply with the provider's recommendation. Conclusions: Emphasis on provider recommendations and the knowledge and attitudes of influenza infection and vaccination may enhance influenza vaccination rates in the organized vaccination programs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05a
• /
• pp.32-35
• /
• 2004

In this paper, we propose two novel high-rate high-performance space-time codes for multiple-input multiple-output (MIMO) systems. When $n_{T}$ transmit antennas and $n_{R}$ = $n_{T}$ receive antennas are deployed, the two proposed codes respectively offer transmission rates of ( $n_{T}$ -I) and ( $n_{T}$ - 2) symbols per channel use and diversity orders of 3 and 5. As a consequence, our proposed codes allow the MIMO systems to employ a simple detection technique based on QR decomposition. Moreover, for equal or even higher spectral efficiencies, our proposed codes always provide much better bit error rate (BER) performances than V-BLAST architecture does when $n_{R}$ = $n_{T}$. Computer simulation is given to verify performances of our proposed codes.sed codes.des.